lör 2009-10-03 klockan 08:15 +0200 skrev Henrik Nordstrom: > Already have btconsole (and ttconsole) running which helps as there is > no serial port on the "ONE New Edition".
Just found the serial port on "ONE New Edition", or at least the TxD an RxD pins which are the most important ones, so looks like I will be comfortable doing some serious hacking here.. Unfortunately only available on internal test pads on the front side of the PCB (below screen), and not yet sure if CTS/RTS is there as well but maybe. There is several pads spread out in that area, all seemingly going down to the same region of the CPU chip where the uart0 connections are. Will do some more probes tomorrow to try to find those, then to figure out how to do some reasonable wiring to allow console connection without using needles.. would be nice to not have to dismantle the whole unit for console access. Unfortunately space is a little too cramped to fit an usb<->3.3ttl serial adapter internally, otherwise that had been my first choice. Regards Henrik
