Hi Tim,
I also had problems with ssh-key authentication a while back when using
the "Credentials" Tab in the Webinterface. Manually everything worked
fine, but not with scans (not even with keys generaten by OpenVAS itself).
Have you tried using the "SSH Authentication" NVT to store the keys?
("Credentials" family, OID 1.3.6.1.4.1.25623.1.0.90022). It says
deprecated, but it's the only working way to use credentials I could
find. If I put my ssh-keys in there and add the check to my scan config,
local checks work.
Ryan
On 5/27/2012 6:13 PM, Tim Webster wrote:
I have tried every combination of autogen, password, key pair with and
without passphrase,
libssh 0.5.2
gnutls 2.8.5
openvas-libraries 5.0.1
I have tested the authentication manual, and it is successful.
All fail with the same error.
event task:MESSAGE:2012-05-27 22h46.20 UTC:27401: Status of task tim
autogen (840001d4-bc82-48e9-815b-26459f46a1cb) has changed to Requested
event task:MESSAGE:2012-05-27 22h46.20 UTC:27401: Task
840001d4-bc82-48e9-815b-26459f46a1cb has been requested to start
lib serv:WARNING:2012-05-27 22h46.20 UTC:27401: Failed to
gnutls_bye: Error in the push function.
---------
I have tried
gnutls 2.12.18
however this version does not allow authentication with gsa. greenbone
security assistance
should I try?
gnutls 3.0.{18,19}
If this is a know issue. I will gladly help with development.
Your reply is appreciated.
regards
Tim
_______________________________________________
Openvas-discuss mailing list
[email protected]
http://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
_______________________________________________
Openvas-discuss mailing list
[email protected]
http://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
