This is a bit offtopic, but let me google that for you: https://wiki.debian.org/ListInstalledPackages
Eero 2017-03-03 8:35 GMT+02:00 Mark Spears <[email protected]>: > Can you please give me an example of how to check which gnutls version I > am running? > > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Eero Volotinen > *Sent:* Friday, March 3, 2017 12:19 AM > *To:* Mark Spears <[email protected]> > *Cc:* [email protected] > *Subject:* RE: [Openvas-discuss] Scan with remote slave "Internal Error" > > > > check version of gnutls and downgrade it to same version that working > slaves are running. > > > > Eero > > > > 3.3.2017 8.02 ap. "Mark Spears" <[email protected]> kirjoitti: > > Kali rolling version 2016.2 on the master. > > Kali ARM version 2.1.2 > > > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Eero Volotinen > *Sent:* Thursday, March 2, 2017 11:52 PM > *To:* Mark Spears <[email protected]> > *Cc:* [email protected] > *Subject:* Re: [Openvas-discuss] Scan with remote slave "Internal Error" > > > > Sounds like problems with gnutls library. what linux os and version you > are using? > > > > Eeo > > > > 3.3.2017 7.06 ap. "Mark Spears" <[email protected]> kirjoitti: > > We have several remote slaves installed. Two of them have experienced > issues recently. Both of them worked with a test host discovery scan sent > from the master and then quit working. I don’t know if it was due to an > improper shutdown causing corruption somewhere or an issue with the > firewall rules... I would just like some help in troubleshooting. > > > > The first one we resolved by re-installing the original VM it was working > on. On installation, the only default changes that are made are to adjust > which IP the manager is listening on based on the network the slave is > being deployed at. All remote slaves are made from the same image. All the > other slaves are working great. > > > > The second one we have not yet resolved. > > > > - Slave: Openvas-check-setup reports no errors > - Slave: systemctl status on the three openvas services (gsa, manager, > and scanner) reports all active with no errors. > - Slave: journalctl -xe command reports no errors > - Slave: /var/log/openvas/gsad.log shows no errors > - Slave: /var/log/openvas/openvasmd.log shows the slave receiving info > from the master: > > Target GUID (GUID) has been created by user > > Scan config GUID (GUID) has been created by user > > Status of task (GUID) has been changed to new > > - Slave: /var/log/openvas/openvassd.messages shows no errors > - Master: openvas-check-setup reports no errors > - Master: systemctl status one all 3 services reports all active with > no errors > - Master journalctl -xe command reports no errors > - Master: /var/log/openvas/gsad.log reports no errors > - Master: /var/log/openvas/openvasmd.log shows > > (event) Status of the task REMOTESCAN (GUID) has changed to Requested > > (event) Task REMOTESCAN (GUID) has been requested to start by user > > (lib) Failed to write to server: The specified session has been > invalidated for some reason. (7 times…) > > (lib) Failed to gnutls_bye: Error in the push function. > > (event) Status of task REMOTESCAN (GUID) has changed to Internal Error > > - Master: /var/log/openvas/openvas.messages shows > > Openvassd 5.0.7 started > > Client not present > > Received the Terminated signal (which could have been me running > openvas-stop after I get “Internal Error” on GSAD?) > > > > - I’ve deleted the scan that remained on the slave. Rebooted both > master and slave and then re-started the scan. Same results. > - I’ve deleted the scan that remained on the slave, deleted the > scan/targets/etc on the master, rebooted both computers and then recreated > the scan on the master and re-started the scan. Same results. > - I’ve deleted the scan that remained on the slave, rebooted it, > created the scan directly on the slave, and started it. It will not start > (or even get to “requested”) nor does it give any error message. > > > > I’m way beyond the basic troubleshooting. What log files am I missing to > review. Where is my golden bullet! Please advise. > > > > > > > _______________________________________________ > Openvas-discuss mailing list > [email protected] > https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss > >
_______________________________________________ Openvas-discuss mailing list [email protected] https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
