Hi, thnx for reply!
Run this:openvasmd --rebuild --progress --verbose
Rebuilding NVT cache... done.
did also: openvasmd --update && openvasmd --rebuild
service openvas-scanner restart
-----------------------
ps aux | grep openvas
root 1120 0.1 4.2 373608 86384 ? SL Jul10 1:29 openvasmd
root 1269 0.0 0.4 184584 8480 ? Ss Jul10 0:16
openvassd: Waiting for incoming connections
root 2365 0.0 4.1 370488 84580 ? S Jul10 0:02 openvasmd
root 10040 0.3 0.4 184584 8528 ? Ss 11:50 0:13
openvassd: Waiting for incoming connections
root 10046 0.2 0.4 184584 8536 ? Ss 11:50 0:10
openvassd: Waiting for incoming connections
root 10375 5.3 0.4 184588 8492 ? Ss 13:03 0:09
openvassd: Waiting for incoming connections
root 10386 0.0 0.0 114692 968 pts/0 S+ 13:07 0:00 grep
--color=auto openvas
------------------------
in:
---------------------
tail /var/log/openvas/openvasmd.log
md main:MESSAGE:2017-07-11 09h23.29 utc:10315: OpenVAS Manager
version 7.0.1 (DB revision 184)
md main: INFO:2017-07-11 09h23.29 utc:10315:
rebuild_nvt_cache_retry: Reloading NVT cache
md main: INFO:2017-07-11 09h23.29 utc:10316:
update_or_rebuild_nvt_cache: Rebuilding NVT cache
base gpgme:MESSAGE:2017-07-11 09h23.29 utc:10316: Setting GnuPG dir to
'/var/lib/openvas/openvasmd/gnupg'
base gpgme:MESSAGE:2017-07-11 09h23.29 utc:10316: Using OpenPGP engine
version '2.0.22'
md main: INFO:2017-07-11 09h23.30 utc:10316: Updating NVT cache.
----------------------------
Process finishes, but not sure if update is done
On the other hand regarding DB it looks quite full:
[root@openvas ~]# ls -lah /var/lib/openvas/mgr/tasks.db
104M Jul 11 12:23 /var/lib/openvas/mgr/tasks.db
Only thing I haven't done is
WARNING: Signature checking of NVTs is not enabled in OpenVAS
Scanner.
SUGGEST: Enable signature checking (see
http://www.openvas.org/trusted-nvts.html).
But not sure if it is Obligatory, as " openvas-check-setup --v9" says it
is OK.
Best regards,
Reinis
On 11/07/2017 11:39, TMC wrote:
Hi there
did you run openvas feed update?
On 11 July 2017 at 18:30, Reinis Nartiss <[email protected]
<mailto:[email protected]>> wrote:
Hallo, comunity!
We have set up OpenVAS to CentOS 7, changed nmap to 5.51 and
# openvas-check-setup --v9
finishes with: It seems like your OpenVAS-9 installation is OK
with some .
Log file (/tmp/openvas-check-setup.log) is attached.
The problem is with running CVE tests, they all finishes with:
---------------------------
The report is empty. This can happen for the following reasons:
The target hosts could be regarded dead.
You could change the Alive Test method of the target. However, if
the targets are indeed dead, the scan duration might increase
significantly. (Click here to edit the target)
----------------------------
Alive test is "Consider alive"
Ping is going with no problems and "OpenVAS Default" scan also
works on same machines.
Please advice where to look for problem!
Thank You,
Reinis Nartiss
_______________________________________________
Openvas-discuss mailing list
[email protected]
<mailto:[email protected]>
https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
<https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss>
--
--
GPG key fingerprint: 07DF B95B DB58 57B6 9656 682E 830A D092 288E F017
GPG public key available on pgp(dot)net key server
_______________________________________________
Openvas-discuss mailing list
[email protected]
https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
