When I run sudo systemctl start openvas-scanner - the system times out
Job for openvas-scanner.service failed because a timeout was exceeded.
See "systemctl status openvas-scanner.service" and "journalctl -xe" for
details.
The system worked on Ubuntu 18.04 on two days ago when I installed it. I
rebooted the computer and did run an apt update and upgrade on the
instance. Since that time I have not been able to get the Openvas-scanner
to start.
I found and attempted to follow this advice from Christian Fische - I do
not have items 1 or 2 in my configuration.
"most likely the known issue where redis is blocking any access by the
scanner due to unknown reasons. This should do the trick:
1. Delete dump.rdb (somewhere in /var/run/redis or similar)
2. Comment out/remove all "save xy z" (e.g. save 900 1) from your redis.conf
3. restart redis
4. restart scanner and try again
Regards,
Christian Fische"
I have an openvassd.dump file and it contains
(openvassd:99392): lib kb_redis-CRITICAL **: 11:48:42.038: redis_new:
cannot access redis at '/var/run/redis/redis.sock'
(openvassd:99413): lib kb_redis-CRITICAL **: 11:48:42.038:
get_redis_ctx: redis connection error: No such file or directory
(openvassd:99403): lib kb_redis-CRITICAL **: 11:48:42.038:
get_redis_ctx: redis connection error: No such file or directory
(openvassd:99393): lib kb_redis-CRITICAL **: 11:48:42.038: redis_new:
cannot access redis at '/var/run/redis/redis.sock'
(openvassd:99390): lib kb_redis-CRITICAL **: 11:48:42.038: redis_new:
cannot access redis at '/var/run/redis/redis.sock'
but in the redis log file it indicates
51575:M 05 Jul 12:53:46.255 # WARNING: The TCP backlog setting of 511
cannot be enforced because /proc/sys/net/core/somaxconn is set to the
lower value of 128.
51575:M 05 Jul 12:53:46.255 # Server initialized
51575:M 05 Jul 12:53:46.255 # WARNING overcommit_memory is set to 0!
Background save may fail under low memory condition. To fix this issue
add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or
run the command 'sysctl vm.overcommit_memory=1' for this to take
effect.
51575:M 05 Jul 12:53:46.255 # WARNING you have Transparent Huge Pages
(THP) support enabled in your kernel. This will create latency and
memory usage issues with Redis. To fix this issue run the command
'echo never > /sys/kernel/mm/transparent_hugepage/enabled' as root,
and add it to your /etc/rc.local in order to retain the setting after
a reboot. Redis must be restarted after THP is disabled.
51575:M 05 Jul 12:53:46.661 * DB loaded from disk: 0.406 seconds
51575:M 05 Jul 12:53:46.661 * Ready to accept connections
51575:M 05 Jul 12:53:46.661 * The server is now ready to accept
connections at /var/run/redis/redis.sock
openvas-check-setup 2.3.7
Mode: desktop
Date: Thu, 05 Jul 2018 12:50:00 -0500
Checking for old OpenVAS Scanner <= 2.0 ...
./openvas-check-setup.txt: 172: ./openvas-check-setup.txt: openvasd: not found
Checking presence of OpenVAS Scanner ...
OpenVAS Scanner 5.1.2
Most new code since 2005: (C) 2016 Greenbone Networks GmbH
Nessus origin: (C) 2004 Renaud Deraison <derai...@nessus.org>
License GPLv2: GNU GPL version 2
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Checking OpenVAS Scanner version ...
OK: OpenVAS Scanner is present in version 5.1.2.
plugins_folder = /var/lib/openvas/plugins
cache_folder = /var/cache/openvas
include_folders = /var/lib/openvas/plugins
max_hosts = 30
max_checks = 10
be_nice = no
logfile = /var/log/openvas/openvassd.messages
log_whole_attack = no
log_plugins_name_at_load = no
dumpfile = /var/log/openvas/openvassd.dump
cgi_path = /cgi-bin:/scripts
optimize_test = yes
checks_read_timeout = 5
network_scan = no
non_simult_ports = 139, 445
plugins_timeout = 320
scanner_plugins_timeout = 36000
safe_checks = yes
auto_enable_dependencies = yes
use_mac_addr = no
nasl_no_signature_check = yes
drop_privileges = no
unscanned_closed = yes
unscanned_closed_udp = yes
vhosts =
vhosts_ip =
report_host_details = yes
kb_location = /var/run/redis/redis.sock
timeout_retry = 3
config_file = /etc/openvas/openvassd.conf
Checking presence of redis ...
OK: redis-server is present in version v=4.0.9.
Checking if redis-server is configured properly to run with openVAS ...
OK: scanner (kb_location setting) is configured properly using the redis-server socket: /var/run/redis/redis.sock
Checking if redis-server is running ...
OK: redis-server is running and listening on socket: /var/run/redis/redis.sock.
OK: redis-server configuration is OK and redis-server is running.
Checking NVT collection ...
OK: NVT collection in /var/lib/openvas/plugins contains 46013 NVTs.
Checking status of signature checking in OpenVAS Scanner ...
WARNING: Signature checking of NVTs is not enabled in OpenVAS Scanner.
SUGGEST: Enable signature checking (see http://www.openvas.org/trusted-nvts.html).
WARNING: The initial NVT cache has not yet been generated.
SUGGEST: Start OpenVAS Scanner for the first time to generate the cache.
Checking presence of OpenVAS Manager ...
OpenVAS Manager 7.0.3
Manager DB revision 184
Copyright (C) 2010-2016 Greenbone Networks GmbH
License GPLv2+: GNU GPL version 2 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
OK: OpenVAS Manager is present in version 7.0.3.
Checking OpenVAS Manager database ...
OK: OpenVAS Manager database found in /var/lib/openvas/mgr/tasks.db.
Checking access rights of OpenVAS Manager database ...
OK: Access rights for the OpenVAS Manager database are correct.
Checking sqlite3 presence ...
OK: sqlite3 found, extended checks of the OpenVAS Manager installation enabled.
Checking OpenVAS Manager database revision ...
OK: OpenVAS Manager database is at revision 184.
Checking database revision expected by OpenVAS Manager ...
OK: OpenVAS Manager expects database at revision 184.
OK: Database schema is up to date.
Checking OpenVAS Manager database (NVT data) ...
OK: OpenVAS Manager database contains information about 45997 NVTs.
Checking if users exist ...
OK: At least one user exists.
Checking OpenVAS SCAP database ...
OK: OpenVAS SCAP database found in /var/lib/openvas/scap-data/scap.db.
Checking OpenVAS CERT database ...
OK: OpenVAS CERT database found in /var/lib/openvas/cert-data/cert.db.
Checking xsltproc presence ...
OK: xsltproc found.
Checking status of password policy ...
WARNING: Your password policy is empty.
SUGGEST: Edit the /etc/openvas/pwpolicy.conf file to set a password policy.
Checking presence of Greenbone Security Assistant ...
Greenbone Security Assistant 7.0.3
Copyright (C) 2010-2016 Greenbone Networks GmbH
License GPLv2+: GNU GPL version 2 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
OK: Greenbone Security Assistant is present in version 7.0.3.
Verifying certificate infrastructure ...
OK: Directory for keys (/var/lib/openvas/private/CA) exists.
OK: Directory for certificates (/var/lib/openvas/CA) exists.
OK: CA key found in /var/lib/openvas/private/CA/cakey.pem
OK: CA certificate found in /var/lib/openvas/CA/cacert.pem
OK: CA certificate verified.
OK: Certificate /var/lib/openvas/CA/clientcert.pem verified.
OK: Certificate /var/lib/openvas/CA/servercert.pem verified.
OK: Your OpenVAS certificate infrastructure passed validation.
OK: Your OpenVAS certificate infrastructure passed validation.
Checking presence of OpenVAS CLI ...
OMP Command Line Interface 1.4.5
Copyright (C) 2010-2016 Greenbone Networks GmbH
License GPLv2+: GNU GPL version 2 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
OK: OpenVAS CLI version 1.4.5.
SKIP: Skipping check for Greenbone Security Desktop.
Checking netstat presence ...
OK: netstat found, extended checks of the OpenVAS services enabled.
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 20473/redis-server
tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 1259/systemd-resolv
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 1535/cupsd
tcp6 0 0 :::4000 :::* LISTEN 2187/gsad
tcp6 0 0 ::1:6379 :::* LISTEN 20473/redis-server
tcp6 0 0 ::1:631 :::* LISTEN 1535/cupsd
OK: OpenVAS Scanner is running and listening on a Unix domain socket.
OK: OpenVAS Manager is running and listening on a Unix domain socket.
OK: Greenbone Security Assistant is running and listening on all interfaces.
WARNING: Greenbone Security Assistant is listening on port 4000, which is NOT the default port!
SUGGEST: Ensure Greenbone Security Assistant is listening on one of the following ports: 80, 443, 9392.
Checking presence of nmap ...
WARNING: Your version of nmap is not fully supported: 7.60
SUGGEST: You should install nmap 5.51 if you plan to use the nmap NSE NVTs.
Checking presence of pdflatex ...
OK: pdflatex found.
Checking presence of LaTeX packages required for PDF report generation ...
OK: PDF generation successful. The PDF report format is likely to work.
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex 2018.7.2) 5 JUL 2018 12:50
entering extended mode
restricted \write18 enabled.
%&-line parsing enabled.
**/tmp/openvas-check-setup-tmp.i01S9uxGKx/test.tex
(/tmp/openvas-check-setup-tmp.i01S9uxGKx/test.tex
LaTeX2e <2017-04-15>
Babel <3.18> and hyphenation patterns for 3 language(s) loaded.
(/usr/share/texlive/texmf-dist/tex/latex/base/article.cls
Document Class: article 2014/09/29 v1.4h Standard LaTeX document class
(/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo
File: size10.clo 2014/09/29 v1.4h Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/share/texlive/texmf-dist/tex/latex/tools/tabularx.sty
Package: tabularx 2016/02/03 v2.11 `tabularx' package (DPC)
(/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty
Package: array 2016/10/06 v2.4d Tabular extension package (FMi)
\col@sep=\dimen103
\extrarowheight=\dimen104
\NC@list=\toks14
\extratabsurround=\skip43
\backup@length=\skip44
)
\TX@col@width=\dimen105
\TX@old@table=\dimen106
\TX@old@col=\dimen107
\TX@target=\dimen108
\TX@delta=\dimen109
\TX@cols=\count87
\TX@ftn=\toks15
) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty
Package: geometry 2010/09/12 v5.6 Page Geometry
(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
\KV@toks@=\toks16
) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty
Package: ifpdf 2017/03/15 v3.2 Provides the ifpdf switch
) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty
Package: ifvtex 2016/05/16 v1.6 Detect VTeX and its facilities (HO)
Package ifvtex Info: VTeX not detected.
) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
)
\Gm@cnth=\count88
\Gm@cntv=\count89
\c@Gm@tempcnt=\count90
\Gm@bindingoffset=\dimen110
\Gm@wd@mp=\dimen111
\Gm@odd@mp=\dimen112
\Gm@even@mp=\dimen113
\Gm@layoutwidth=\dimen114
\Gm@layoutheight=\dimen115
\Gm@layouthoffset=\dimen116
\Gm@layoutvoffset=\dimen117
\Gm@dimlist=\toks17
) (/usr/share/texlive/texmf-dist/tex/latex/comment/comment.sty
\CommentStream=\write3
Excluding comment 'comment') (/usr/share/texlive/texmf-dist/tex/latex/tools/lon
gtable.sty
Package: longtable 2014/10/28 v4.11 Multi-page Table package (DPC)
\LTleft=\skip45
\LTright=\skip46
\LTpre=\skip47
\LTpost=\skip48
\LTchunksize=\count91
\LTcapwidth=\dimen118
\LT@head=\box26
\LT@firsthead=\box27
\LT@foot=\box28
\LT@lastfoot=\box29
\LT@cols=\count92
\LT@rows=\count93
\c@LT@tables=\count94
\c@LT@chunks=\count95
\LT@p@ftn=\toks18
) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty
Package: titlesec 2016/03/21 v2.10.2 Sectioning titles
\ttl@box=\box30
\beforetitleunit=\skip49
\aftertitleunit=\skip50
\ttl@plus=\dimen119
\ttl@minus=\dimen120
\ttl@toksa=\toks19
\titlewidth=\dimen121
\titlewidthlast=\dimen122
\titlewidthfirst=\dimen123
) (/usr/share/texlive/texmf-dist/tex/latex/changepage/chngpage.sty
Package: chngpage 2009/10/20 v1.2b change page layout
\c@cp@cnt=\count96
\c@cp@tempcnt=\count97
) (/usr/share/texlive/texmf-dist/tex/latex/tools/calc.sty
Package: calc 2014/10/28 v4.3 Infix arithmetic (KKT,FJ)
\calc@Acount=\count98
\calc@Bcount=\count99
\calc@Adimen=\dimen124
\calc@Bdimen=\dimen125
\calc@Askip=\skip51
\calc@Bskip=\skip52
LaTeX Info: Redefining \setlength on input line 80.
LaTeX Info: Redefining \addtolength on input line 81.
\calc@Ccount=\count100
\calc@Cskip=\skip53
) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty
\Urlmuskip=\muskip10
Package: url 2013/09/16 ver 3.4 Verb mode for urls, etc.
) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty
Package: inputenc 2015/03/17 v1.2c Input encoding file
\inpenc@prehook=\toks20
\inpenc@posthook=\toks21
(/usr/share/texlive/texmf-dist/tex/latex/ucs/utf8x.def
File: utf8x.def 2004/10/17 UCS: Input encoding UTF-8
)) (/usr/share/texlive/texmf-dist/tex/latex/ucs/ucs.sty
Package: ucs 2013/05/11 v2.2 UCS: Unicode input support
(/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-global.def
File: uni-global.def 2013/05/13 UCS: Unicode global data
)
\uc@secondtry=\count101
\uc@combtoks=\toks22
\uc@combtoksb=\toks23
\uc@temptokena=\toks24
) (/usr/share/texlive/texmf-dist/tex/latex/colortbl/colortbl.sty
Package: colortbl 2012/02/13 v1.0a Color table columns (DPC)
(/usr/share/texlive/texmf-dist/tex/latex/graphics/color.sty
Package: color 2016/07/10 v1.1e Standard LaTeX Color (DPC)
(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
File: color.cfg 2016/01/02 v1.6 sample color configuration
)
Package color Info: Driver file: pdftex.def on input line 147.
(/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
File: pdftex.def 2018/01/08 v1.0l Graphics/color driver for pdftex
))
\everycr=\toks25
\minrowclearance=\skip54
) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty
Package: hyperref 2018/02/06 v6.86b Hypertext links for LaTeX
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty
Package: hobsub-hyperref 2016/05/16 v1.14 Bundle oberdiek, subset hyperref (HO)
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty
Package: hobsub-generic 2016/05/16 v1.14 Bundle oberdiek, subset generic (HO)
Package: hobsub 2016/05/16 v1.14 Construct package bundles (HO)
Package: infwarerr 2016/05/16 v1.4 Providing info/warning/error messages (HO)
Package: ltxcmds 2016/05/16 v1.23 LaTeX kernel commands for general use (HO)
Package: ifluatex 2016/05/16 v1.4 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
Package hobsub Info: Skipping package `ifvtex' (already loaded).
Package: intcalc 2016/05/16 v1.2 Expandable calculations with integers (HO)
Package hobsub Info: Skipping package `ifpdf' (already loaded).
Package: etexcmds 2016/05/16 v1.6 Avoid name clashes with e-TeX commands (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds) That can mean that you are not using pdfTeX 1.50 or
(etexcmds) that some package has redefined \expanded.
(etexcmds) In the latter case, load this package earlier.
Package: kvsetkeys 2016/05/16 v1.17 Key value parser (HO)
Package: kvdefinekeys 2016/05/16 v1.4 Define keys (HO)
Package: pdftexcmds 2018/01/21 v0.26 Utility functions of pdfTeX for LuaTeX (HO
)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
Package pdftexcmds Info: \pdfdraftmode found.
Package: pdfescape 2016/05/16 v1.14 Implements pdfTeX's escape features (HO)
Package: bigintcalc 2016/05/16 v1.4 Expandable calculations on big integers (HO
)
Package: bitset 2016/05/16 v1.2 Handle bit-vector datatype (HO)
Package: uniquecounter 2016/05/16 v1.3 Provide unlimited unique counter (HO)
)
Package hobsub Info: Skipping package `hobsub' (already loaded).
Package: letltxmacro 2016/05/16 v1.5 Let assignment for LaTeX macros (HO)
Package: hopatch 2016/05/16 v1.3 Wrapper for package hooks (HO)
Package: xcolor-patch 2016/05/16 xcolor patch
Package: atveryend 2016/05/16 v1.9 Hooks at the very end of document (HO)
Package atveryend Info: \enddocument detected (standard20110627).
Package: atbegshi 2016/06/09 v1.18 At begin shipout hook (HO)
Package: refcount 2016/05/16 v3.5 Data extraction from label references (HO)
Package: hycolor 2016/05/16 v1.8 Color options for hyperref/bookmark (HO)
) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty
Package: auxhook 2016/05/16 v1.4 Hooks for auxiliary files (HO)
) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty
Package: kvoptions 2016/05/16 v3.12 Key value format for package options (HO)
)
\@linkdim=\dimen126
\Hy@linkcounter=\count102
\Hy@pagecounter=\count103
(/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def
File: pd1enc.def 2018/02/06 v6.86b Hyperref: PDFDocEncoding definition (HO)
)
\Hy@SavedSpaceFactor=\count104
(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
Package hyperref Info: Hyper figures OFF on input line 4509.
Package hyperref Info: Link nesting OFF on input line 4514.
Package hyperref Info: Hyper index ON on input line 4517.
Package hyperref Info: Plain pages OFF on input line 4524.
Package hyperref Info: Backreferencing OFF on input line 4529.
Package hyperref Info: Implicit mode ON; LaTeX internals redefined.
Package hyperref Info: Bookmarks ON on input line 4762.
\c@Hy@tempcnt=\count105
LaTeX Info: Redefining \url on input line 5115.
\XeTeXLinkMargin=\dimen127
\Fld@menulength=\count106
\Field@Width=\dimen128
\Fld@charsize=\dimen129
Package hyperref Info: Hyper figures OFF on input line 6369.
Package hyperref Info: Link nesting OFF on input line 6374.
Package hyperref Info: Hyper index ON on input line 6377.
Package hyperref Info: backreferencing OFF on input line 6384.
Package hyperref Info: Link coloring OFF on input line 6389.
Package hyperref Info: Link coloring with OCG OFF on input line 6394.
Package hyperref Info: PDF/A mode OFF on input line 6399.
LaTeX Info: Redefining \ref on input line 6439.
LaTeX Info: Redefining \pageref on input line 6443.
\Hy@abspage=\count107
\c@Item=\count108
\c@Hfootnote=\count109
)
Package hyperref Info: Driver (autodetected): hpdftex.
(/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def
File: hpdftex.def 2018/02/06 v6.86b Hyperref driver for pdfTeX
\Fld@listcount=\count110
\c@bookmark@seq@number=\count111
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty
Package: rerunfilecheck 2016/05/16 v1.8 Rerun checks for auxiliary files (HO)
Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 2
82.
)
\Hy@SectionHShift=\skip55
)
Package hyperref Info: Option `colorlinks' set `true' on input line 34.
Package hyperref Warning: Option `bookmarks' has already been used,
(hyperref) setting the option has no effect on input line 34.
Package hyperref Info: Option `bookmarksopen' set `true' on input line 34.
(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty
Package: hypcap 2016/05/16 v1.12 Adjusting the anchors of captions (HO)
)
No file test.aux.
\openout1 = `test.aux'.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 45.
LaTeX Font Info: ... okay on input line 45.
*geometry* driver: auto-detecting
*geometry* detected driver: pdftex
*geometry* verbose mode - [ preamble ] result:
* driver: pdftex
* paper: a4paper
* layout: <same size as paper>
* layoutoffset:(h,v)=(0.0pt,0.0pt)
* modes:
* h-part:(L,W,R)=(89.62709pt, 418.25368pt, 89.6271pt)
* v-part:(T,H,B)=(101.40665pt, 591.5302pt, 152.11pt)
* \paperwidth=597.50787pt
* \paperheight=845.04684pt
* \textwidth=418.25368pt
* \textheight=591.5302pt
* \oddsidemargin=17.3571pt
* \evensidemargin=17.3571pt
* \topmargin=-7.86334pt
* \headheight=12.0pt
* \headsep=25.0pt
* \topskip=10.0pt
* \footskip=30.0pt
* \marginparwidth=65.0pt
* \marginparsep=11.0pt
* \columnsep=10.0pt
* \skip\footins=9.0pt plus 4.0pt minus 2.0pt
* \hoffset=0.0pt
* \voffset=0.0pt
* \mag=1000
* \@twocolumnfalse
* \@twosidefalse
* \@mparswitchfalse
* \@reversemarginfalse
* (1in=72.27pt=25.4mm, 1cm=28.453pt)
(/usr/share/texlive/texmf-dist/tex/latex/ucs/ucsencs.def
File: ucsencs.def 2011/01/21 Fixes to fontencodings LGR, T3
) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
\scratchcounter=\count112
\scratchdimen=\dimen130
\scratchbox=\box31
\nofMPsegments=\count113
\nofMParguments=\count114
\everyMPshowfont=\toks26
\MPscratchCnt=\count115
\MPscratchDim=\dimen131
\MPnumerator=\count116
\makeMPintoPDFobject=\count117
\everyMPtoPDFconversion=\toks27
)
\AtBeginShipoutBox=\box32
Package hyperref Info: Link coloring ON on input line 45.
(/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty
Package: nameref 2016/05/21 v2.44 Cross-referencing by name of section
(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty
Package: gettitlestring 2016/05/16 v1.5 Cleanup title references (HO)
)
\c@section@level=\count118
)
LaTeX Info: Redefining \ref on input line 45.
LaTeX Info: Redefining \pageref on input line 45.
LaTeX Info: Redefining \nameref on input line 45.
\@outlinefile=\write4
\openout4 = `test.out'.
Package atveryend Info: Empty hook `BeforeClearDocument' on input line 47.
[1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}
]
Package atveryend Info: Empty hook `AfterLastShipout' on input line 47.
(/tmp/openvas-check-setup-tmp.i01S9uxGKx/test.aux)
Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 47.
Package atveryend Info: Executing hook `AtEndAfterFileList' on input line 47.
Package rerunfilecheck Info: File `test.out' has not changed.
(rerunfilecheck) Checksum: <no file>.
Package atveryend Info: Empty hook `AtVeryVeryEnd' on input line 47.
)
Here is how much of TeX's memory you used:
6099 strings out of 494923
90872 string characters out of 6180743
185561 words of memory out of 5000000
9378 multiletter control sequences out of 15000+600000
3993 words of font info for 15 fonts, out of 8000000 for 9000
14 hyphenation exceptions out of 8191
34i,5n,25p,344b,319s stack positions out of 5000i,500n,10000p,200000b,80000s
</usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb>
Output written on /tmp/openvas-check-setup-tmp.i01S9uxGKx/test.pdf (1 page, 156
47 bytes).
PDF statistics:
17 PDF objects out of 1000 (max. 8388607)
12 compressed objects within 1 object stream
2 named destinations out of 1000 (max. 500000)
1 words of extra memory for PDF output out of 10000 (max. 10000000)
Checking presence of ssh-keygen ...
OK: ssh-keygen found, LSC credential generation for GNU/Linux targets is likely to work.
Checking presence of rpm ...
OK: rpm found, LSC credential package generation for RPM based targets is likely to work.
Checking presence of alien ...
OK: alien found, LSC credential package generation for DEB based targets is likely to work.
Checking presence of nsis ...
OK: nsis found, LSC credential package generation for Microsoft Windows targets is likely to work.
Checking for SELinux ...
_______________________________________________
Openvas-discuss mailing list
Openvas-discuss@wald.intevation.org
https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
