On Sun, 12 Sep 2004, Jan Kiszka wrote:
> Hi,
>
> on a Windows 2000 system, I'm facing troubles with setting the default
> gateway. The problem is that openvpn reports only two routing table
> entries in its log file:
>
> SYSTEM ROUTING TABLE
> 127.0.0.0 255.0.0.0 127.0.0.1 p=0 i=1 t=0 pr=2 a=0 h=0 m=1/1/1/1/1
> 127.0.0.1 255.255.255.255 127.0.0.1 p=0 i=1 t=0 pr=2 a=0 h=0 m=1/1/1/1/1
> SYSTEM ADAPTER LIST
> TAP-Win32 Adapter V8
> Index = 2
> GUID = {62B7CB49-88A5-43EB-B7ED-63647CCE3A20}
> IP = XXX.XXX.XXX.36/255.255.255.0
> MAC = 00:ff:62:b7:cb:49
> GATEWAY =
> DHCP SERV = XXX.XXX.XXX.3
> DHCP LEASE OBTAINED = Sun Sep 12 21:14:10 2004
> DHCP LEASE EXPIRES = Sun Sep 12 22:14:10 2004
> Realtek RTL8139/810x Family Fast Ethernet NIC
> Index = 16777220
> GUID = {890D661C-E523-41A5-969A-C88B9A8467AA}
> IP = 192.168.0.100/255.255.255.0
> MAC = 00:e0:7d:8c:df:0f
> GATEWAY = 192.168.0.1/0.0.0.0
> DHCP SERV = 192.168.0.1
> DHCP LEASE OBTAINED = Sun Sep 12 21:11:59 2004
> DHCP LEASE EXPIRES = Sun Sep 12 21:21:59 2004
>
> "route print" gives me this list:
>
> 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.100
> 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1
> 192.168.0.0 255.255.255.0 192.168.0.100 192.168.0.100
> 192.168.0.100 255.255.255.255 127.0.0.1 127.0.0.1
> 192.168.0.255 255.255.255.255 192.168.0.100 192.168.0.100
> 224.0.0.0 224.0.0.0 192.168.0.100 192.168.0.100
> 255.255.255.255 255.255.255.255 192.168.0.100 2
> default gateway: 192.168.0.1
>
> I also tried the route_method switch, but then I discovered that this
> only applies to add/delete operations. Is GetIpForwardTable() also known
> to make troubles? Are there alternative ways to obtain the routing
> entries - beside parsing the "route print" output?
Unfortunately GetIpForwardTable() is known to sometimes produce different
results than route print.
James
