James Yonan wrote:
Change Log:
2009.05.30 -- Version 2.1_rc17
* Reduce the debug level (--verb) at which received management interface
commands are echoed from 7 to 3. Passwords will be filtered.
* Fixed race condition in management interface recv code on
Windows, where sending a set of several commands to the
management interface in quick succession might cause the
latter commands in the set to be ignored.
* Increased management interface input command buffer size
from 256 to 1024 bytes.
* Minor tweaks to Windows build system.
* Added "redirect-private" option which allows private subnets
to be pushed to the client in such a way that they don't accidently
obscure critical local addresses such as the DHCP server address and
DNS server addresses.
* Added 'autolocal' redirect-gateway flag. When enabled, the OpenVPN
client will examine the routing table and determine whether (a) the
OpenVPN server is reachable via a locally connected interface, or (b)
traffic to the server must be forwarded through the default router.
Only add a special bypass route for the OpenVPN server if (b) is true.
If (a) is true, behave as if the 'local' flag is specified, and do not
add a bypass route.
The new 'autolocal' flag depends on the non-portable test_local_addr()
function in route.c, which is currently only implemented for Windows.
The 'autolocal' flag will act as a no-op on platforms that have not
yet defined a test_local_addr() function.
* Increased TLS_CHANNEL_BUF_SIZE to 2048 from 1024 (this will allow for
more option content to be pushed from server to client).
* Raised D_MULTI_DROPPED debug level to 4 from 3 to filter out (at debug
levels <=3) a common and usually innocuous warning.
* Fixed issue of symbol conflicts interfering with Windows CryptoAPI
functionality (Alon Bar-Lev).
* Fixed bug where the remote_X environmental variables were not being
set correctly when the 'local' option is specifed.
James
I just compared the 2.1_rc16 and 2.1_rc17 trees ... I see these files in
the tar ball in addition:
contrib/pull-resolv-conf/client.down.bak
contrib/pull-resolv-conf/client.up.bak
easy-rsa/2.0/pkitool.bak
plugin/auth-pam/auth-pam.c.bak
plugin/defer/simple.c.bak
plugin/down-root/down-root.c.bak
plugin/examples/log.c.bak
plugin/examples/simple.c.bak
tap-win32/common.h.bak
tap-win32/constants.h.bak
tap-win32/dhcp.c.bak
tap-win32/dhcp.h.bak
tap-win32/endian.h.bak
tap-win32/error.c.bak
tap-win32/error.h.bak
tap-win32/hexdump.c.bak
tap-win32/hexdump.h.bak
tap-win32/i386/OemWin2k.inf.in.bak
tap-win32/instance.c.bak
tap-win32/lock.h.bak
tap-win32/macinfo.c.bak
tap-win32/macinfo.h.bak
tap-win32/mem.c.bak
tap-win32/proto.h.bak
tap-win32/prototypes.h.bak
tap-win32/tapdrvr.c.bak
tap-win32/types.h.bak
Just a missing clean-up? or something we should be worried about?
kind regards,
David Sommerseth
