We have pre-init and cleanup commands, but some test cases might need
or want to run a shell script after openvpn has initialized, but before
executing any tests (ifconfig comparison and ping).
Example: POSTINIT_CMD_4="sleep 5" on MacOS X for tap tests (IPv6 DAD)
Signed-off-by: Gert Doering <g...@greenie.muc.de>
---
tests/t_client.rc-sample | 3 +++
tests/t_client.sh.in | 7 +++++++
2 files changed, 10 insertions(+)
diff --git a/tests/t_client.rc-sample b/tests/t_client.rc-sample
index fb2abfa..59f34c7 100644
--- a/tests/t_client.rc-sample
+++ b/tests/t_client.rc-sample
@@ -75,6 +75,9 @@ RUN_TITLE_2="testing tun/tcp/ipv4+ipv6"
OPENVPN_CONF_2="$OPENVPN_BASE_P2MP --dev tun --proto tcp --remote $REMOTE
--port 51194"
PING4_HOSTS_2="10.100.51.1 10.100.0.1"
PING6_HOSTS_2="2001:db8::1 2001:db8:a051::1"
+#
+# run command after openvpn initialization is done - here: delay 5 seconds
+POSTINIT_CMD_2="sleep 5"
# Test 3: UDP / p2p tun
# ...
diff --git a/tests/t_client.sh.in b/tests/t_client.sh.in
index b2428b9..6c81bc4 100755
--- a/tests/t_client.sh.in
+++ b/tests/t_client.sh.in
@@ -263,6 +263,7 @@ for SUF in $TEST_RUN_LIST
do
# get config variables
eval test_prep=\"\$PREPARE_$SUF\"
+ eval test_postinit=\"\$POSTINIT_CMD_$SUF\"
eval test_cleanup=\"\$CLEANUP_$SUF\"
eval test_run_title=\"\$RUN_TITLE_$SUF\"
eval openvpn_conf=\"\$OPENVPN_CONF_$SUF\"
@@ -362,6 +363,12 @@ do
echo -e " OK!\n"
fi
+ # post init script needed?
+ if [ -n "$test_postinit" ]; then
+ echo -e "running post-init cmd: '$test_postinit'"
+ eval $test_postinit
+ fi
+
# expected ifconfig values in there?
check_ifconfig 4 "$expect_ifconfig4"
check_ifconfig 6 "$expect_ifconfig6"
--
2.9.0
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-devel mailing list
Openvpn-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
