Fork @ github: https://github.com/JDTX/openvpn
(76ab12606155f51aaaf376a46f4a52a459af105c)
From: Jonathan Tooker <jonat...@reliablehosting.com>
Date: Tue, 22 Jan 2019 18:27:39 -0600
Subject: [PATCH] Fix various spelling mistakes
Fix spelling mistakes in code/headers/manpages/etc.
---
distro/rpm/openvpn.init.d.rhel | 2 +-
distro/rpm/openvpn.init.d.suse | 4 ++--
doc/keying-material-exporter.txt | 2 +-
doc/openvpn.8 | 14 +++++++-------
sample/sample-config-files/client.conf | 2 +-
sample/sample-keys/openssl.cnf | 4 ++--
src/openvpn/buffer.c | 2 +-
src/openvpn/console.h | 6 +++---
src/openvpn/crypto.h | 2 +-
src/openvpn/crypto_backend.h | 2 +-
src/openvpn/fragment.c | 2 +-
src/openvpn/init.c | 18 +++++++++---------
src/openvpn/mss.c | 2 +-
src/openvpn/options.c | 14 +++++++-------
src/openvpn/packet_id.h | 2 +-
src/openvpn/route.c | 2 +-
src/openvpn/run_command.c | 4 ++--
src/openvpn/socket.c | 12 ++++++------
src/openvpn/socket.h | 2 +-
src/openvpn/ssl.c | 2 +-
src/openvpn/tun.c | 8 ++++----
src/openvpn/win32.c | 2 +-
src/openvpn/win32.h | 2 +-
src/openvpnmsica/msica_op.h | 2 +-
src/plugins/auth-pam/README.auth-pam | 4 ++--
src/plugins/auth-pam/utils.h | 6 +++---
src/tapctl/tap.c | 2 +-
tests/t_client.sh.in | 2 +-
tests/unit_tests/openvpn/test_tls_crypt.c | 2 +-
29 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
index bfde2216..04125ca6 100755
--- a/distro/rpm/openvpn.init.d.rhel
+++ b/distro/rpm/openvpn.init.d.rhel
@@ -113,7 +113,7 @@ case "$1" in
# From a security perspective, I think it makes
# sense to remove this, and have users who need
- # it explictly enable in their --up scripts or
+ # it explicitly enable in their --up scripts or
# firewall setups.
#echo 1 > /proc/sys/net/ipv4/ip_forward
diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse
index 270024e8..1b4bcf06 100644
--- a/distro/rpm/openvpn.init.d.suse
+++ b/distro/rpm/openvpn.init.d.suse
@@ -72,7 +72,7 @@
# - removed sourcing "network"
# - removed network checking. it seemed not to work
with SuSE.
# - added sourcing "rc.status", comments and
"rc_reset" command
-# - removed "succes; echo" and "failure; echo" lines
+# - removed "success; echo" and "failure; echo" lines
# - added "rc_status" lines at the end of each
section
# - changed "service" to "/etc/init.d/" in "In
addition to start/stop"
# section above.
@@ -126,7 +126,7 @@ case "$1" in
# From a security perspective, I think it makes
# sense to remove this, and have users who need
- # it explictly enable in their --up scripts or
+ # it explicitly enable in their --up scripts or
# firewall setups.
#echo 1 > /proc/sys/net/ipv4/ip_forward
diff --git a/doc/keying-material-exporter.txt b/doc/keying-material-exporter.txt
index 4187d828..4c1addc8 100644
--- a/doc/keying-material-exporter.txt
+++ b/doc/keying-material-exporter.txt
@@ -48,7 +48,7 @@ to application layer using well-defined mechanism.
[DerivedAAABindingKey] [DerivedAAABindingKey]
[AuthenticateBindingKeys]
Client -------> Server
- [Confidental channel]
+ [Confidential channel]
TLS Message flow for a full handshake
diff --git a/doc/openvpn.8 b/doc/openvpn.8
index 7abcaf1e..e5c0626a 100644
--- a/doc/openvpn.8
+++ b/doc/openvpn.8
@@ -696,7 +696,7 @@ are used.
If the
.B ipv6only
-keyword is present OpenVPN will bind only to IPv6 (as oposed
+keyword is present OpenVPN will bind only to IPv6 (as opposed
to IPv6 and IPv4) when a IPv6 socket is opened.
.\"*********************************************************
@@ -2221,7 +2221,7 @@ that
is parsed on the command line even though
the daemonization point occurs later. If one of the
.B \-\-log
-options is present, it will supercede syslog
+options is present, it will supersede syslog
redirection.
The optional
@@ -2332,7 +2332,7 @@ If
already exists it will be truncated.
This option takes effect
immediately when it is parsed in the command line
-and will supercede syslog output if
+and will supersede syslog output if
.B \-\-daemon
or
.B \-\-inetd
@@ -2817,7 +2817,7 @@ or outside this directory.
DEFAULT_DIR is replaced by the default plug\-in directory,
which is configured at the build time of OpenVPN. CWD is the
current directory where OpenVPN was started or the directory
-OpenVPN have swithed into via the
+OpenVPN have switched into via the
.B \-\-cd
option before the
.B \-\-plugin
@@ -3104,7 +3104,7 @@ IV_LZO_STUB=1 \-\- if client was built with LZO stub
capability
IV_LZ4=1 \-\- if the client supports LZ4 compressions.
-IV_PROTO=2 \-\- if the client supports peer\-id floating mechansim
+IV_PROTO=2 \-\- if the client supports peer\-id floating mechanism
IV_NCP=2 \-\- negotiable ciphers, client supports
.B \-\-cipher
@@ -4934,7 +4934,7 @@ Warning!
.B \-\-tls\-cipher
and
.B \-\-tls\-ciphersuites
-are expert features, which \- if used correcly \- can improve the security of
+are expert features, which \- if used correctly \- can improve the security of
your VPN connection. But it is also easy to unwittingly use them to carefully
align a gun with your foot, or just break your connection. Use with care!
@@ -5415,7 +5415,7 @@ UNIQUE_TOKEN_VALUE.
Newer clients (2.4.7+) will fall back to the original password method
after a failed auth. Older clients will keep using the token value
-and react acording to
+and react according to
.B \-\-auth-retry
.
.\"*********************************************************
diff --git a/sample/sample-config-files/client.conf
b/sample/sample-config-files/client.conf
index 5fd4a948..7f2f30a3 100644
--- a/sample/sample-config-files/client.conf
+++ b/sample/sample-config-files/client.conf
@@ -90,7 +90,7 @@ cert client.crt
key client.key
# Verify server certificate by checking that the
-# certicate has the correct key usage set.
+# certificate has the correct key usage set.
# This is an important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
diff --git a/sample/sample-keys/openssl.cnf b/sample/sample-keys/openssl.cnf
index aabfd48f..02bf8ac6 100644
--- a/sample/sample-keys/openssl.cnf
+++ b/sample/sample-keys/openssl.cnf
@@ -19,7 +19,7 @@ crl = $dir/crl.pem
# The current CRL
private_key = $dir/ca.key # The private key
RANDFILE = $dir/.rand # private random number
file
-x509_extensions = basic_exts # The extentions
to add to the cert
+x509_extensions = basic_exts # The extensions
to add to the cert
# This allows a V2 CRL. Ancient browsers don't like it, but anything Easy-RSA
# is designed for will. In return, we get the Issuer attached to CRLs.
@@ -54,7 +54,7 @@ default_bits = 2048
default_keyfile = privkey.pem
default_md = sha256
distinguished_name = cn_only
-x509_extensions = easyrsa_ca # The extentions
to add to the self signed cert
+x509_extensions = easyrsa_ca # The extensions
to add to the self signed cert
# A placeholder to handle the $EXTRA_EXTS feature:
#%EXTRA_EXTS% # Do NOT remove or change this line as $EXTRA_EXTS
support requires it
diff --git a/src/openvpn/buffer.c b/src/openvpn/buffer.c
index 2aae5c4c..8575e295 100644
--- a/src/openvpn/buffer.c
+++ b/src/openvpn/buffer.c
@@ -46,7 +46,7 @@ array_mult_safe(const size_t m1, const size_t m2, const
size_t extra)
unsigned long long res = (unsigned long long)m1 * (unsigned long long)m2 +
(unsigned long long)extra;
if (unlikely(m1 > limit) || unlikely(m2 > limit) || unlikely(extra >
limit) || unlikely(res > (unsigned long long)limit))
{
- msg(M_FATAL, "attemped allocation of excessively large array");
+ msg(M_FATAL, "attempted allocation of excessively large array");
}
return (size_t) res;
}
diff --git a/src/openvpn/console.h b/src/openvpn/console.h
index 0ffd6683..62beacae 100644
--- a/src/openvpn/console.h
+++ b/src/openvpn/console.h
@@ -33,9 +33,9 @@
*/
struct _query_user {
char *prompt; /**< Prompt to present to the user */
- size_t prompt_len; /**< Lenght of the prompt string */
+ size_t prompt_len; /**< Length of the prompt string */
char *response; /**< The user's response */
- size_t response_len; /**< Lenght the of the user reposone */
+ size_t response_len; /**< Length the of the user reposone */
bool echo; /**< True: The user should see what is being
typed, otherwise mask it */
};
@@ -55,7 +55,7 @@ void query_user_clear(void);
* @param prompt Prompt to display to the user
* @param prompt_len Length of the prompt string
* @param resp String containing the user response
- * @param resp_len Lenght of the response string
+ * @param resp_len Length of the response string
* @param echo Should the user input be echoed to the user? If False,
input will be masked
*
*/
diff --git a/src/openvpn/crypto.h b/src/openvpn/crypto.h
index 09f7bb25..c5947483 100644
--- a/src/openvpn/crypto.h
+++ b/src/openvpn/crypto.h
@@ -299,7 +299,7 @@ int read_key(struct key *key, const struct key_type *kt,
struct buffer *buf);
* @param authname The name of the HMAC digest to use
* @param keysize The length of the cipher key to use, in bytes. Only
valid
* for ciphers that support variable length keys.
- * @param tls_mode Specifies wether we are running in TLS mode, which allows
+ * @param tls_mode Specifies whether we are running in TLS mode, which
allows
* more ciphers than static key mode.
* @param warn Print warnings when null cipher / auth is used.
*/
diff --git a/src/openvpn/crypto_backend.h b/src/openvpn/crypto_backend.h
index a04e01f4..7e9a4bd2 100644
--- a/src/openvpn/crypto_backend.h
+++ b/src/openvpn/crypto_backend.h
@@ -634,7 +634,7 @@ void hmac_ctx_free(hmac_ctx_t *ctx);
* Initialises the given HMAC context, using the given digest
* and key.
*
- * @param ctx HMAC context to intialise
+ * @param ctx HMAC context to initialise
* @param key The key to use for the HMAC
* @param key_len The key length to use
* @param kt Static message digest parameters
diff --git a/src/openvpn/fragment.c b/src/openvpn/fragment.c
index 3f0ec2fa..6df71d07 100644
--- a/src/openvpn/fragment.c
+++ b/src/openvpn/fragment.c
@@ -178,7 +178,7 @@ fragment_incoming(struct fragment_master *f, struct buffer
*buf,
if (flags & (FRAG_SEQ_ID_MASK | FRAG_ID_MASK))
{
- FRAG_ERR("spurrious FRAG_WHOLE flags");
+ FRAG_ERR("spurious FRAG_WHOLE flags");
}
}
else if (frag_type == FRAG_YES_NOTLAST || frag_type == FRAG_YES_LAST)
diff --git a/src/openvpn/init.c b/src/openvpn/init.c
index 560d87db..3c449678 100644
--- a/src/openvpn/init.c
+++ b/src/openvpn/init.c
@@ -1005,7 +1005,7 @@ init_options_dev(struct options *options)
{
if (!options->dev && options->dev_node)
{
- char *dev_node = string_alloc(options->dev_node, NULL); /* POSIX
basename() implementaions may modify its arguments */
+ char *dev_node = string_alloc(options->dev_node, NULL); /* POSIX
basename() implementations may modify its arguments */
options->dev = basename(dev_node);
}
}
@@ -1134,7 +1134,7 @@ do_persist_tuntap(const struct options *options)
"options --mktun and --rmtun are not available on your operating "
"system. Please check 'man tun' (or 'tap'), whether your system "
"supports using 'ifconfig %s create' / 'destroy' to create/remove
"
- "persistant tunnel interfaces.", options->dev );
+ "persistent tunnel interfaces.", options->dev );
#endif
}
return false;
@@ -2391,7 +2391,7 @@ socket_restart_pause(struct context *c)
}
c->persist.restart_sleep_seconds = 0;
- /* do managment hold on context restart, i.e. second, third, fourth, etc.
initialization */
+ /* do management hold on context restart, i.e. second, third, fourth, etc.
initialization */
if (do_hold(sec))
{
sec = 0;
@@ -3066,7 +3066,7 @@ do_init_frame(struct context *c)
/* packets with peer-id (P_DATA_V2) need 3 extra bytes in frame (on client)
* and need link_mtu+3 bytes on socket reception (on server).
*
- * accomodate receive path in f->extra_link, which has the side effect of
+ * accommodate receive path in f->extra_link, which has the side effect of
* also increasing send buffers (BUF_SIZE() macro), which need to be
* allocated big enough before receiving peer-id option from server.
*
@@ -3193,7 +3193,7 @@ do_option_warnings(struct context *c)
msg(M_WARN, "WARNING: --ns-cert-type is DEPRECATED. Use
--remote-cert-tls instead.");
}
- /* If a script is used, print appropiate warnings */
+ /* If a script is used, print appropriate warnings */
if (o->user_script_used)
{
if (script_security() >= SSEC_SCRIPTS)
@@ -3562,7 +3562,7 @@ do_close_link_socket(struct context *c)
}
/*
- * Close packet-id persistance file
+ * Close packet-id persistence file
*/
static void
do_close_packet_id(struct context *c)
@@ -3657,7 +3657,7 @@ do_close_status_output(struct context *c)
}
/*
- * Handle ifconfig-pool persistance object.
+ * Handle ifconfig-pool persistence object.
*/
static void
do_open_ifconfig_pool_persist(struct context *c)
@@ -4269,7 +4269,7 @@ init_instance(struct context *c, const struct env_set
*env, const unsigned int f
do_init_traffic_shaper(c);
}
- /* do one-time inits, and possibily become a daemon here */
+ /* do one-time inits, and possibly become a daemon here */
do_init_first_time(c);
#ifdef ENABLE_PLUGIN
@@ -4399,7 +4399,7 @@ close_instance(struct context *c)
do_close_plugins(c);
#endif
- /* close packet-id persistance file */
+ /* close packet-id persistence file */
do_close_packet_id(c);
/* close --status file */
diff --git a/src/openvpn/mss.c b/src/openvpn/mss.c
index b0e2c42b..f15c656e 100644
--- a/src/openvpn/mss.c
+++ b/src/openvpn/mss.c
@@ -110,7 +110,7 @@ mss_fixup_ipv6(struct buffer *buf, int maxmss)
* before the final header (TCP, UDP, ...), so we'd need to walk that
* chain (see RFC 2460 and RFC 6564 for details).
*
- * In practice, "most typically used" extention headers (AH, routing,
+ * In practice, "most typically used" extension headers (AH, routing,
* fragment, mobility) are very unlikely to be seen inside an OpenVPN
* tun, so for now, we only handle the case of "single next header = TCP"
*/
diff --git a/src/openvpn/options.c b/src/openvpn/options.c
index bebd3005..e34b65b1 100644
--- a/src/openvpn/options.c
+++ b/src/openvpn/options.c
@@ -451,7 +451,7 @@ static const char usage_message[] =
" user/pass via environment, if method='via-file', pass\n"
" user/pass via temporary file.\n"
"--auth-gen-token [lifetime] Generate a random authentication token which
is pushed\n"
- " to each client, replacing the password. Usefull when\n"
+ " to each client, replacing the password. Useful when\n"
" OTP based two-factor auth mechanisms are in use and\n"
" --reneg-* options are enabled. Optionally a lifetime in
seconds\n"
" for generated tokens can be set.\n"
@@ -675,7 +675,7 @@ static const char usage_message[] =
"--pkcs11-protected-authentication [0|1] ... : Use PKCS#11 protected
authentication\n"
" path. Set for each provider.\n"
"--pkcs11-private-mode hex ... : PKCS#11 private key mode mask.\n"
- " 0 : Try to determind automatically
(default).\n"
+ " 0 : Try to determine automatically
(default).\n"
" 1 : Use Sign.\n"
" 2 : Use SignRecover.\n"
" 4 : Use Decrypt.\n"
@@ -898,7 +898,7 @@ init_options(struct options *o, const bool init_gc)
/* Set default --tmp-dir */
#ifdef _WIN32
- /* On Windows, find temp dir via enviroment variables */
+ /* On Windows, find temp dir via environment variables */
o->tmp_dir = win_get_tempdir();
#else
/* Non-windows platforms use $TMPDIR, and if not set, default to '/tmp' */
@@ -3084,8 +3084,8 @@ options_postprocess_mutate(struct options *o)
*/
#ifndef ENABLE_SMALL /** Expect people using the stripped down version to know
what they do */
-#define CHKACC_FILE (1<<0) /** Check for a file/directory precense */
-#define CHKACC_DIRPATH (1<<1) /** Check for directory precense where a file
should reside */
+#define CHKACC_FILE (1<<0) /** Check for a file/directory presence */
+#define CHKACC_DIRPATH (1<<1) /** Check for directory presence where a file
should reside */
#define CHKACC_FILEXSTWR (1<<2) /** If file exists, is it writable? */
#define CHKACC_INLINE (1<<3) /** File is present if it's an inline file */
#define CHKACC_ACPTSTDIN (1<<4) /** If filename is stdin, it's allowed and
"exists" */
@@ -3119,7 +3119,7 @@ check_file_access(const int type, const char *file, const
int mode, const char *
/* Is the directory path leading to the given file accessible? */
if (type & CHKACC_DIRPATH)
{
- char *fullpath = string_alloc(file, NULL); /* POSIX dirname()
implementaion may modify its arguments */
+ char *fullpath = string_alloc(file, NULL); /* POSIX dirname()
implementation may modify its arguments */
char *dirpath = dirname(fullpath);
if (platform_access(dirpath, mode|X_OK) != 0)
@@ -3169,7 +3169,7 @@ check_file_access(const int type, const char *file, const
int mode, const char *
msg(M_NOPREFIX | M_OPTERR | M_ERRNO, "%s fails with '%s'", opt, file);
}
- /* Return true if an error occured */
+ /* Return true if an error occurred */
return (errcode != 0 ? true : false);
}
diff --git a/src/openvpn/packet_id.h b/src/openvpn/packet_id.h
index 26b07975..3b58da22 100644
--- a/src/openvpn/packet_id.h
+++ b/src/openvpn/packet_id.h
@@ -258,7 +258,7 @@ bool packet_id_read(struct packet_id_net *pin, struct
buffer *buf, bool long_for
* @param p Packet ID state.
* @param buf Buffer to write the packet ID too
* @param long_form If true, also update and write time_t to buf
- * @param prepend If true, prepend to buffer, otherwise apppend.
+ * @param prepend If true, prepend to buffer, otherwise append.
*
* @return true if successful, false otherwise.
*/
diff --git a/src/openvpn/route.c b/src/openvpn/route.c
index 2836d532..376e2673 100644
--- a/src/openvpn/route.c
+++ b/src/openvpn/route.c
@@ -1820,7 +1820,7 @@ route_ipv6_clear_host_bits( struct route_ipv6 *r6 )
{
/* clear host bit parts of route
* (needed if routes are specified improperly, or if we need to
- * explicitely setup/clear the "connected" network routes on some OSes)
+ * explicitly setup/clear the "connected" network routes on some OSes)
*/
int byte = 15;
int bits_to_clear = 128 - r6->netbits;
diff --git a/src/openvpn/run_command.c b/src/openvpn/run_command.c
index 04ad2312..2d75a3e9 100644
--- a/src/openvpn/run_command.c
+++ b/src/openvpn/run_command.c
@@ -113,7 +113,7 @@ openvpn_execve_allowed(const unsigned int flags)
/*
* Run execve() inside a fork(). Designed to replicate the semantics of
system() but
* in a safer way that doesn't require the invocation of a shell or the risks
- * assocated with formatting and parsing a command line.
+ * associated with formatting and parsing a command line.
*/
int
openvpn_execve(const struct argv *a, const struct env_set *es, const unsigned
int flags)
@@ -199,7 +199,7 @@ openvpn_execve_check(const struct argv *a, const struct
env_set *es, const unsig
/*
* Run execve() inside a fork(), duping stdout. Designed to replicate the
semantics of popen() but
* in a safer way that doesn't require the invocation of a shell or the risks
- * assocated with formatting and parsing a command line.
+ * associated with formatting and parsing a command line.
*/
int
openvpn_popen(const struct argv *a, const struct env_set *es)
diff --git a/src/openvpn/socket.c b/src/openvpn/socket.c
index db944245..c472cf1b 100644
--- a/src/openvpn/socket.c
+++ b/src/openvpn/socket.c
@@ -992,7 +992,7 @@ link_socket_update_buffer_sizes(struct link_socket *ls, int
rcvbuf, int sndbuf)
}
/*
- * SOCKET INITALIZATION CODE.
+ * SOCKET INITIALIZATION CODE.
* Create a TCP/UDP socket
*/
@@ -2535,7 +2535,7 @@ link_socket_current_remote(const struct link_socket_info
*info)
* by now just ignore it
*
* For --remote entries with multiple addresses this
- * only return the actual endpoint we have sucessfully connected to
+ * only return the actual endpoint we have successfully connected to
*/
if (lsa->actual.dest.addr.sa.sa_family != AF_INET)
{
@@ -2566,7 +2566,7 @@ link_socket_current_remote_ipv6(const struct
link_socket_info *info)
* for PF_INET6 routes over PF_INET6 endpoints
*
* For --remote entries with multiple addresses this
- * only return the actual endpoint we have sucessfully connected to
+ * only return the actual endpoint we have successfully connected to
*/
if (lsa->actual.dest.addr.sa.sa_family != AF_INET6)
{
@@ -3279,7 +3279,7 @@ addr_family_name(int af)
*
* IPv6 and IPv4 protocols are comptabile but OpenVPN
* has always sent UDPv4, TCPv4 over the wire. Keep these
- * strings for backward compatbility
+ * strings for backward compatibility
*/
const char *
proto_remote(int proto, bool remote)
@@ -3364,7 +3364,7 @@ link_socket_read_tcp(struct link_socket *sock,
#if ENABLE_IP_PKTINFO
-/* make the buffer large enough to handle ancilliary socket data for
+/* make the buffer large enough to handle ancillary socket data for
* both IPv4 and IPv6 destination addresses, plus padding (see RFC 2292)
*/
#if defined(HAVE_IN_PKTINFO) && defined(HAVE_IPI_SPEC_DST)
@@ -3879,7 +3879,7 @@ socket_finalize(SOCKET s,
if (ret >= 0 && io->addr_defined)
{
/* TODO(jjo): streamline this mess */
- /* in this func we dont have relevant info about the PF_ of this
+ /* in this func we don't have relevant info about the PF_ of this
* endpoint, as link_socket_actual will be zero for the 1st
received packet
*
* Test for inets PF_ possible sizes
diff --git a/src/openvpn/socket.h b/src/openvpn/socket.h
index 17801418..e95547d1 100644
--- a/src/openvpn/socket.h
+++ b/src/openvpn/socket.h
@@ -99,7 +99,7 @@ struct link_socket_actual
#endif
};
-/* IP addresses which are persistant across SIGUSR1s */
+/* IP addresses which are persistent across SIGUSR1s */
struct link_socket_addr
{
struct addrinfo *bind_local;
diff --git a/src/openvpn/ssl.c b/src/openvpn/ssl.c
index e9927eb8..4c81ae72 100644
--- a/src/openvpn/ssl.c
+++ b/src/openvpn/ssl.c
@@ -2308,7 +2308,7 @@ push_peer_info(struct buffer *buf, struct tls_session
*session)
/* support for P_DATA_V2 */
buf_printf(&out, "IV_PROTO=2\n");
- /* support for Negotiable Crypto Paramters */
+ /* support for Negotiable Crypto Parameters */
if (session->opt->ncp_enabled
&& (session->opt->mode == MODE_SERVER || session->opt->pull))
{
diff --git a/src/openvpn/tun.c b/src/openvpn/tun.c
index 196f7c1a..48a8fdf7 100644
--- a/src/openvpn/tun.c
+++ b/src/openvpn/tun.c
@@ -958,7 +958,7 @@ do_ifconfig_ipv6(struct tuntap *tt, const char *ifname, int
tun_mtu,
#if defined(TARGET_OPENBSD) || defined(TARGET_NETBSD) \
|| defined(TARGET_DARWIN)
- /* and, hooray, we explicitely need to add a route... */
+ /* and, hooray, we explicitly need to add a route... */
add_route_connected_v6_net(tt, es);
#endif
#elif defined(TARGET_AIX)
@@ -1894,7 +1894,7 @@ open_tun(const char *dev, const char *dev_type, const
char *dev_node, struct tun
ASSERT(0);
}
-#endif /* !PENDANTIC */
+#endif /* !PEDANTIC */
#ifdef ENABLE_FEATURE_TUN_PERSIST
@@ -2510,7 +2510,7 @@ open_tun(const char *dev, const char *dev_type, const
char *dev_node, struct tun
/* the current way OpenVPN handles tun devices on NetBSD leads to
* lingering tunX interfaces after close -> for a full cleanup, they
- * need to be explicitely destroyed
+ * need to be explicitly destroyed
*/
void
close_tun(struct tuntap *tt)
@@ -2937,7 +2937,7 @@ open_darwin_utun(const char *dev, const char *dev_type,
const char *dev_node, st
{
fd = utun_open_helper(ctlInfo, utunnum);
/* Break if the fd is valid,
- * or if early initalization failed (-2) */
+ * or if early initialization failed (-2) */
if (fd !=-1)
{
break;
diff --git a/src/openvpn/win32.c b/src/openvpn/win32.c
index be526945..463ac072 100644
--- a/src/openvpn/win32.c
+++ b/src/openvpn/win32.c
@@ -22,7 +22,7 @@
*/
/*
- * Win32-specific OpenVPN code, targetted at the mingw
+ * Win32-specific OpenVPN code, targeted at the mingw
* development environment.
*/
diff --git a/src/openvpn/win32.h b/src/openvpn/win32.h
index 4b4524f1..4814bbc5 100644
--- a/src/openvpn/win32.h
+++ b/src/openvpn/win32.h
@@ -37,7 +37,7 @@
#define WIN_NET_PATH_SUFFIX "\\system32\\net.exe"
/*
- * Win32-specific OpenVPN code, targetted at the mingw
+ * Win32-specific OpenVPN code, targeted at the mingw
* development environment.
*/
diff --git a/src/openvpnmsica/msica_op.h b/src/openvpnmsica/msica_op.h
index 910a6e51..7ce80519 100644
--- a/src/openvpnmsica/msica_op.h
+++ b/src/openvpnmsica/msica_op.h
@@ -390,7 +390,7 @@ struct msica_session
/**
* Initializes execution session
*
- * @param session Pointer to an unitialized execution session
+ * @param session Pointer to an uninitialized execution session
*
* @param hInstall Installer handle
*
diff --git a/src/plugins/auth-pam/README.auth-pam
b/src/plugins/auth-pam/README.auth-pam
index 90815654..4d3d4ecc 100644
--- a/src/plugins/auth-pam/README.auth-pam
+++ b/src/plugins/auth-pam/README.auth-pam
@@ -7,7 +7,7 @@ authentication via PAM, and essentially allows any
authentication
method supported by PAM (such as LDAP, RADIUS, or Linux Shadow
passwords) to be used with OpenVPN. While PAM supports
username/password authentication, this can be combined with X509
-certificates to provide two indepedent levels of authentication.
+certificates to provide two independent levels of authentication.
This module uses a split privilege execution model which will
function even if you drop openvpn daemon privileges using the user,
@@ -65,7 +65,7 @@ the operation of this plugin:
static-challenge
Use of --static challenege is required to pass a pin (represented by "OTP" in
-parameter substituion) or a second password.
+parameter substitution) or a second password.
Run OpenVPN with --verb 7 or higher to get debugging output from
this plugin, including the list of queries presented by the
diff --git a/src/plugins/auth-pam/utils.h b/src/plugins/auth-pam/utils.h
index 90fff668..c876dcc4 100644
--- a/src/plugins/auth-pam/utils.h
+++ b/src/plugins/auth-pam/utils.h
@@ -25,7 +25,7 @@
#define _PLUGIN_AUTH_PAM_UTILS__H
/**
- * Read 'tosearch', replace all occurences of 'searchfor' with 'replacewith'
and return
+ * Read 'tosearch', replace all occurrences of 'searchfor' with 'replacewith'
and return
* a pointer to the NEW string. Does not modify the input strings. Will not
enter an
* infinite loop with clever 'searchfor' and 'replacewith' strings.
*
@@ -35,7 +35,7 @@
* @param searchfor needle to search for in the haystack
* @param replacewith when a match is found, replace needle with this string
*
- * @return Retuns NULL when any parameter is NULL or the worst-case result is
to large ( >= SIZE_MAX).
+ * @return Returns NULL when any parameter is NULL or the worst-case result
is to large ( >= SIZE_MAX).
* Otherwise it returns a pointer to a new buffer containing the
modified input
*/
char *
@@ -48,7 +48,7 @@ searchandreplace(const char *tosearch, const char *searchfor,
const char *replac
* @param name Environment variable to look up
* @param envp Environment variable table with all key/value pairs
*
- * @return Returns a pointer to the value of the enviroment variable if found,
otherwise NULL is returned.
+ * @return Returns a pointer to the value of the environment variable if
found, otherwise NULL is returned.
*/
const char *
get_env(const char *name, const char *envp[]);
diff --git a/src/tapctl/tap.c b/src/tapctl/tap.c
index ed3c6e0b..db724e03 100644
--- a/src/tapctl/tap.c
+++ b/src/tapctl/tap.c
@@ -322,7 +322,7 @@ get_net_interface_guid(
* property that is being retrieved. This is one of the
standard
* registry data types. This parameter is optional and
can be NULL.
*
- * @param ppData A pointer to pointer to data that receives the device
propery. The
+ * @param ppData A pointer to pointer to data that receives the device
property. The
* data must be released with free() after use.
*
* @return ERROR_SUCCESS on success; Win32 error code otherwise
diff --git a/tests/t_client.sh.in b/tests/t_client.sh.in
index b92cb65d..69866fb5 100755
--- a/tests/t_client.sh.in
+++ b/tests/t_client.sh.in
@@ -417,7 +417,7 @@ done
if [ -z "$SUMMARY_OK" ] ; then SUMMARY_OK=" none"; fi
if [ -z "$SUMMARY_FAIL" ] ; then SUMMARY_FAIL=" none"; fi
-echo "Test sets succeded:$SUMMARY_OK."
+echo "Test sets succeeded:$SUMMARY_OK."
echo "Test sets failed:$SUMMARY_FAIL."
# remove trap handler
diff --git a/tests/unit_tests/openvpn/test_tls_crypt.c
b/tests/unit_tests/openvpn/test_tls_crypt.c
index 17f7d899..b9e3a7a6 100644
--- a/tests/unit_tests/openvpn/test_tls_crypt.c
+++ b/tests/unit_tests/openvpn/test_tls_crypt.c
@@ -328,7 +328,7 @@ test_tls_crypt_v2_setup(void **state) {
ctx->gc = gc_new();
- /* Sligthly longer buffers to be able to test too-long data */
+ /* Slightly longer buffers to be able to test too-long data */
ctx->metadata = alloc_buf_gc(TLS_CRYPT_V2_MAX_METADATA_LEN+16, &ctx->gc);
ctx->unwrapped_metadata = alloc_buf_gc(TLS_CRYPT_V2_MAX_METADATA_LEN+16,
&ctx->gc);
--
2.20.1.windows.1
_______________________________________________
Openvpn-devel mailing list
Openvpn-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
