If t_client.sh is run interactively, more verbose output is useful
to quickly see what it is doing. If run from a CI environment, going
through lots of output for successful tests just to find the one that
failed is non-useful.
Introduce V=<n> environment variable to control output verbosity
V=0 - do not print any per-test output at all, just overall summary
V=1 - print single header line for each successful test
print full output for failing tests
V=99 - print full output, always, as before
default is V=1 now
Signed-off-by: Gert Doering <g...@greenie.muc.de>
---
tests/t_client.sh.in | 89 +++++++++++++++++++++++++++++---------------
1 file changed, 59 insertions(+), 30 deletions(-)
diff --git a/tests/t_client.sh.in b/tests/t_client.sh.in
index 76ac9b22..4c217645 100755
--- a/tests/t_client.sh.in
+++ b/tests/t_client.sh.in
@@ -121,17 +121,43 @@ else
exit 1
fi
+# verbosity, defaults to "1"
+V="${V:-1}"
+
exit_code=0
# ----------------------------------------------------------
# helper functions
# ----------------------------------------------------------
+# output progress information
+# depending on verbosity level, collect & print only on failure
+output_start()
+{
+ outbuf="\n";
+ case $V in
+ 0) outbuf="" ;; # no per-test output at all
+ 1) echo -e "$@" ;; # compact, details only on failure
+ *) echo -e "\n$@\n" ;; # print all, with a bit formatting
+ esac
+}
+
+output()
+{
+ NO_NL=''; if [ "X$1" = "-n" ] ; then NO_NL=$1 ; shift ; fi
+ case $V in
+ 0) ;; # no per-test output at all
+ 1) outbuf="$outbuf\n$@" # print details only on failure
+ test -z "$NO_NL" && outbuf="$outbuf\n"
+ ;;
+ *) echo -e $NO_NL "$@" ;; # print everything
+ esac
+}
+
# print failure message, increase FAIL counter
fail()
{
- echo ""
- echo "FAIL: $@" >&2
+ output "\nFAIL: $@"
fail_count=$(( $fail_count + 1 ))
}
@@ -236,7 +262,7 @@ run_ping_tests()
for bytes in $sizes_list
do
- echo "run IPv$proto ping tests ($want), $bytes byte packets..."
+ output "run IPv$proto ping tests ($want), $bytes byte packets..."
echo "$cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist"
>>$LOGDIR/$SUF:fping.out
$cmd -b $bytes -C 20 -p 250 -q $FPING_EXTRA_ARGS $targetlist
>>$LOGDIR/$SUF:fping.out 2>&1
@@ -287,32 +313,32 @@ do
up=""
fi
- echo -e "\n### test run $SUF: '$test_run_title' ###\n"
+ output_start "### test run $SUF: '$test_run_title' ###"
fail_count=0
if [ -n "$test_prep" ]; then
- echo -e "running preparation: '$test_prep'"
+ output "running preparation: '$test_prep'"
eval $test_prep
fi
- echo "save pre-openvpn ifconfig + route"
+ output "save pre-openvpn ifconfig + route"
get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_pre.txt
- echo -e "\nrun pre-openvpn ping tests - targets must not be reachable..."
+ output "\nrun pre-openvpn ping tests - targets must not be reachable..."
run_ping_tests 4 want_fail "$ping4_hosts"
run_ping_tests 6 want_fail "$ping6_hosts"
if [ "$fail_count" = 0 ] ; then
- echo -e "OK.\n"
+ output "OK.\n"
else
- echo -e "FAIL: make sure that ping hosts are ONLY reachable via VPN,
SKIP test $SUF".
+ fail "make sure that ping hosts are ONLY reachable via VPN, SKIP test
$SUF."
SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
exit_code=31
- continue
+ echo -e "$outbuf" ; continue
fi
pidfile="${top_builddir}/tests/$LOGDIR/openvpn-$SUF.pid"
openvpn_conf="$openvpn_conf --writepid $pidfile $up"
- echo " run openvpn $openvpn_conf"
+ output " run openvpn $openvpn_conf"
echo "# src/openvpn/openvpn $openvpn_conf" >$LOGDIR/$SUF:openvpn.log
umask 022
$RUN_SUDO "${top_builddir}/src/openvpn/openvpn" $openvpn_conf
>>$LOGDIR/$SUF:openvpn.log &
@@ -335,25 +361,25 @@ do
opid=`cat $pidfile`
if [ -n "$opid" ]; then
- echo " OpenVPN running with PID $opid"
+ output " OpenVPN running with PID $opid"
else
- echo " Could not read OpenVPN PID file" >&2
+ output " Could not read OpenVPN PID file"
fi
# If OpenVPN did not start
if [ $ovpn_init_success -ne 1 -o -z "$opid" ]; then
- echo "$0: OpenVPN did not initialize in a reasonable time" >&2
+ output "$0: OpenVPN did not initialize in a reasonable time"
if [ -n "$opid" ]; then
$RUN_SUDO $KILL_EXEC $opid
fi
$RUN_SUDO $KILL_EXEC $sudopid
- echo "tail -5 $SUF:openvpn.log" >&2
- tail -5 $LOGDIR/$SUF:openvpn.log >&2
- echo -e "\nFAIL. skip rest of sub-tests for test run $SUF.\n" >&2
+ output "tail -5 $SUF:openvpn.log"
+ output "`tail -5 $LOGDIR/$SUF:openvpn.log`"
+ fail "skip rest of sub-tests for test run $SUF."
trap - 0 1 2 3 15
SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
exit_code=30
- continue
+ echo -e "$outbuf" ; continue
fi
# make sure openvpn client is terminated in case shell exits
@@ -361,21 +387,21 @@ do
trap "$RUN_SUDO $KILL_EXEC $opid ; trap - 0 ; exit 1" 1 2 3 15
# compare whether anything changed in ifconfig/route setup?
- echo "save ifconfig+route"
+ output "save ifconfig+route"
get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route.txt
- echo -n "compare pre-openvpn ifconfig+route with current values..."
+ output -n "compare pre-openvpn ifconfig+route with current values..."
if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
$LOGDIR/$SUF:ifconfig_route.txt >/dev/null
then
fail "no differences between ifconfig/route before OpenVPN start and
now."
else
- echo -e " OK!\n"
+ output " OK!\n"
fi
# post init script needed?
if [ -n "$test_postinit" ]; then
- echo -e "running post-init cmd: '$test_postinit'"
+ output "running post-init cmd: '$test_postinit'"
eval $test_postinit
fi
@@ -385,9 +411,9 @@ do
run_ping_tests 4 want_ok "$ping4_hosts"
run_ping_tests 6 want_ok "$ping6_hosts"
- echo -e "ping tests done.\n"
+ output "ping tests done.\n"
- echo "stopping OpenVPN"
+ output "stopping OpenVPN"
$RUN_SUDO $KILL_EXEC $opid
wait $!
rc=$?
@@ -395,23 +421,26 @@ do
fail "OpenVPN return code $rc, expect 0"
fi
- echo -e "\nsave post-openvpn ifconfig + route..."
+ output "\nsave post-openvpn ifconfig + route..."
get_ifconfig_route >$LOGDIR/$SUF:ifconfig_route_post.txt
- echo -n "compare pre- and post-openvpn ifconfig + route..."
+ output -n "compare pre- and post-openvpn ifconfig + route..."
if diff $LOGDIR/$SUF:ifconfig_route_pre.txt \
$LOGDIR/$SUF:ifconfig_route_post.txt
>$LOGDIR/$SUF:ifconfig_route_diff.txt
then
- echo -e " OK.\n"
+ output " OK.\n"
else
- cat $LOGDIR/$SUF:ifconfig_route_diff.txt >&2
+ output `cat $LOGDIR/$SUF:ifconfig_route_diff.txt`
fail "differences between pre- and post-ifconfig/route"
fi
if [ "$fail_count" = 0 ] ; then
- echo -e "test run $SUF: all tests OK.\n"
+ output "test run $SUF: all tests OK.\n"
SUMMARY_OK="$SUMMARY_OK $SUF"
else
- echo -e "test run $SUF: $fail_count test failures. FAIL.\n";
+ if [ "$V" -gt 0 ] ; then
+ echo -e "$outbuf"
+ echo "test run $SUF: $fail_count test failures. FAIL.\n"
+ fi
SUMMARY_FAIL="$SUMMARY_FAIL $SUF"
exit_code=30
fi
--
2.35.1
_______________________________________________
Openvpn-devel mailing list
Openvpn-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
