I have a (Windows) client that uses a OpenVPN to project an "outside" address (on a Linux server), by using the tunnel as its default route. In the client ccd file, I have this:
----- ifconfig-push 10.12.0.45 10.12.0.46 push "redirect-gateway" ----- And I have iptables set to do the right thing with SNAT: -A POSTROUTING -s 10.12.0.45 -o eth0 -j SNAT --to-source 1.2.3.4 This all works great ... until it doesn't. What happens is that the upstream connectivity goes down for whatever reason, and so the tunnel on the client side breaks and the routes that were installed on the Windows machine are removed. So it's back to having a "normal" default route. Later, the upstream connectivity comes back, and the tunnel is reestablished with the server, but the default routes don't get put back in. I'm using 2.3.4-I003 on the Windows XP client, and it uses IPAPI to do the routes. Has anyone else seen this before? Thanks, /jordan ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Openvpn-users mailing list Openvpn-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openvpn-users
