Argh, you hit on the same problem I hit a week ago:
https://github.com/openwisp/ansible-openwisp2-imagegenerator/issues/3
It is not possible to specify subtargets and specific profiles yet. I have
to implement this.
I was thinking of introducing a new variable that would deprecate the old
one, something like:
openwisp2fw_source_targets:
- board: ar71xx
subtarget: Generic
profile: Default
- board: ramips
subtarget: ramips_mt7620
profile: ramips_mt7620_XIAOMI-MIWIFI-MINI
- board: ramips
subtarget: ramips_mt7620
profile: DEVICE_gl-mt300a
The entire process could become more complex, so I have to find the time to
test this idea a bit and implement it.
For the moment I think you can workaround this issue in two ways:
1. manual
compile the default target, go in the source directory and proceed manually
with a make menuconfig and proceed to select your desired target
2. ugly temporary workaround
you could try using the variable *openwisp2fw_source_other_configs* in the
following way:
# other OpenWRT/LEDE configurations
openwisp2fw_source_other_configs:
# busybox
- CONFIG_BUSYBOX_CUSTOM=y
- CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY=y
- CONFIG_BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT=y
- CONFIG_BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH=y
- CONFIG_BUSYBOX_CONFIG_FEATURE_VI_UNDO=y
- CONFIG_BUSYBOX_CONFIG_WATCH=y
# workaround to avoid conflicts between wpad and wpad-mini
- "# CONFIG_PACKAGE_wpad-mini is not set"
# workaround to compile GL-MT300A
CONFIG_TARGET_SUBTARGET="mt7620"
CONFIG_TARGET_PROFILE="DEVICE_gl-mt300a"
I am sorry you had to go through all of this to find out about this issue,
but now that I know that I'm not the only one facing this issue I will be
more motivated to fix it in the short term.
Federico
On Thu, Feb 2, 2017 at 1:14 PM Xavier Maysonnave <[email protected]>
wrote:
Hi Federico,
I have built a while ago a LEDE firmware for my device a GL-MT300A, I use
it as a reference, especially the content of the .config file.
This one contains the following:
CONFIG_TARGET_BOARD="ramips"
CONFIG_TARGET_SUBTARGET="mt7620"
CONFIG_TARGET_PROFILE="DEVICE_gl-mt300a"
My playbook contains the following:
openwisp2fw_source_archs:
- ramips
I made many tests but I don't know how to specify the subtarget and the
profile ?
Thanks
Le jeudi 2 février 2017 17:37:23 UTC+5:30, Federico Capoano a écrit :
That's great news!
While developing the ansible image generator, I tried setting LEDE as the
default but I couldn't compile successfully most of the time so I had to
switch back to OpenWRT.
When the LEDE stable will be out, if we like it more than OpenWRT, I'd be
happy to switch the image generator to use the new LEDE stable as default.
Federico
On Thursday, February 2, 2017 at 12:56:43 PM UTC+1, Xavier Maysonnave wrote:
Hi Federico,
I switched to the LEDE project as their 17.01.RC1 is out.
I didn't face the previous crash, now I try to build for my real target a
GL-MT300A.
I'll provide feedback.
Thanks
Le samedi 28 janvier 2017 16:44:32 UTC+5:30, Xavier Maysonnave a écrit :
Hi All,
I started to experiment the image generator following the Readme.md and
faces some questions :
1 - in the hosts file I specified an IP address instead of '
mycompiler.mydomain.com'
However in the playbook.yml file at the beginning there is :
- hosts: your_host_here
I assume we need also to reference 'mycompiler.mydomain.com'
That way we can organize multiple compiler servers if needed ?
2 - I don't understand how the root_password is encrypted as I do not see
any salt in the playbook.yml except the one described in the luci_openwisp
entry.
3 - Is there somewhere an exhaustive list of variables we can use, it's a
little bit magic for me :-)
Thanks.
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
