Hi Terence and welcome, for maximum flexibility of the several configuration options, we prefer to use an ansible installer that you can use on a fresh VM and a tutorial that you can read here: https://github.com/openwisp/ansible-openwisp2
In order to control every OpenWRT based device, you need to install the openwisp-config package, read the instructions in this page: https://github.com/openwisp/openwisp-config/ You may also compile your own firmware with the autoregistration settings hardcoded in it, you can use this for new devices so you won't need to manually add every single device in the system manually. Good luck! If you have more questions keep using one of the support channels. Federico On Tue, Sep 5, 2017 at 10:31 AM Terence Faul <[email protected]> wrote: > Hi, are there prebuilt VM's available for openWISP2 controller? can you > upgrade a openwrt device, or do you need to install a new firmware > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
