1 - What are the requirements for this to work? I know create category, the build and upload a image, but ... Is mandatory to have SSH access as described in https://openwisp.io/docs/user/configure-push-updates.html
2 - If a upgrade fails, how can I init the update again? Do I have to delete the firmware from the "Firmware" tab on the device change page and add again? 3- The device has been upgraded successfully, but shows as failed [image: openwisp-upgrade-failed.png] Log says ... Detected a recoverable failure: Connection failed. The upgrade operation will be retried soon. Connection successful, starting upgrade... Image checksum file not found, proceeding with the upload of the new image... Sysupgrade test passed successfully, proceeding with the upgrade operation... Upgrade operation in progress... SSH connection closed, will wait 120 seconds before attempting to reconnect... Trying to reconnect to device at XXX.XXX.XXX.XXX (attempt n.1)... Private key file is encrypted 4 - Is there any way to tell "all devices of this build has to be in build XXX", so if a new device is registered with an old version it will update? -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/4ff6510c-5856-4e26-950c-1a15e71d3078n%40googlegroups.com.
