Hi Federico,
Thank you for your reply,We are trying to clone all the repositories from
Openwisp Github account to our private Github account because we tested our
software with present repositories.So in future when we are installing
Openwisp-server we want it to be installed from our personal Github
account.As you suggested we tried adding our Github path to below variables.
openwisp2_controller_pip: <Github_Path>
openwisp2_notifications_pip: <Github_Path>
openwisp2_users_pip: <Github_Path>
openwisp2_utils_pip: <Github_Path>
openwisp2_django_x509_pip: <Github_Path>
openwisp2_django_loci_pip: <Github_Path>
openwisp2_netjsonconfig_pip: <Github_Path>
openwisp2_network_topology_pip: <Github_Path>
openwisp2_firmware_upgrader_pip: <Github_Path>
openwisp2_monitoring_pip: <Github_Path>
openwisp2_radius_pip: <Github_Path>
My question is these changes are enough or we need to change more to
install complete openwisp-server from our Github repository.
I observed that the requirement.txt file inside openwisp-controller
repository will point to your github repository we need to change those
things also are only above changes are enough to achieve this. Thank you.
On Wednesday, January 19, 2022 at 8:09:42 PM UTC+5:30 f.capoano wrote:
> Look for "_pip" here: https://github.com/openwisp/ansible-openwisp2
> With those variables you can pin down the specific version you use.
>
> # you may replace the values of these variables with any URL
> # supported by pip (the python package installer)
> # use these to install forks, branches or development versions
> # WARNING: only do this if you know what you are doing; disruption
> # of service is very likely to occur during development
> # Custom OpenWISP 2 Python packages will be installed with "--no-deps"
> # parameter, be aware that you will have to add new dependencies if
> # necessary to "openwisp2_extra_python_packages" var
> openwisp2_controller_pip: false
> openwisp2_notifications_pip: false
> openwisp2_users_pip: false
> openwisp2_utils_pip: false
> openwisp2_django_x509_pip: false
> openwisp2_django_loci_pip: false
> openwisp2_netjsonconfig_pip: false
> openwisp2_network_topology_pip: false
> openwisp2_firmware_upgrader_pip: false
> openwisp2_monitoring_pip: false
> openwisp2_radius_pip: false
>
> Best regards
> Federico Capoano
>
> On Wed, Jan 19, 2022 at 10:14 AM Harish SS <[email protected]> wrote:
>
>> Hi Federico,
>>
>> When we are installing openwisp-server through ansible below versions of
>> package are getting installed.
>>
>> openwisp-controller - 0.9.0 alpha
>> openwisp-monitoring - 0.2.0 alpha
>> openwisp-notification - 0.3
>> openwisp-users - 0.6.0 alpha
>> openwisp-utils - 0.8.0 alpha
>>
>> we had tested our custom scripts with these version.So in future when we
>> install the openwisp-server using ansible we need above versions to be
>> installed.We don't want ansible-openwisp2 to install updated version of all
>> these packages in future.
>>
>> Is their any method to achieve this.
>>
>>
>>
>>
>> On Wednesday, January 19, 2022 at 6:24:24 PM UTC+5:30 f.capoano wrote:
>>
>>> Hi Harish,
>>>
>>> I'm glad you were able to make it work!
>>> I think your question is not clear, please try to be more specific and
>>> use a bit more technical reference, what is that you need to do exactly and
>>> you aren't able to figure out right now?
>>>
>>> Best regards
>>> Federico Capoano
>>>
>>> On Wed, Jan 19, 2022 at 6:53 AM Harish SS <[email protected]> wrote:
>>>
>>>> Hi All,
>>>>
>>>> We are able to integrate openwisp server with our openwrt router
>>>> device.Since we have done some modification according to the requirement
>>>> like we are not using ModemManager on our router so we uninstalled the
>>>> ModemManager package and developed customer script to send the Cellular
>>>> Module information like Signal Strength, Signal Quality, Access Technology
>>>> and signal to noise ratio to Openwisp server it's working fine for us.So
>>>> we
>>>> want to retain the present master branch version in the future Openwisp
>>>> Server installation for our device.
>>>> For installation of Openwisp Server we are using the ansible
>>>> method.Can you please help us how to install the same present master
>>>> branch
>>>> for our future installation.
>>>> Since we have tested lot on the present git master branch version,so
>>>> in future we don't want to install the upgraded openwisp server version
>>>> for
>>>> our router.
>>>> Can you please help us out in this regard.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "OpenWISP" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>> To view this discussion on the web, visit
>>>> https://groups.google.com/d/msgid/openwisp/f9c11d2f-a280-4e04-843f-43b8ecb9420dn%40googlegroups.com
>>>>
>>>> <https://groups.google.com/d/msgid/openwisp/f9c11d2f-a280-4e04-843f-43b8ecb9420dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "OpenWISP" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>>
> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/openwisp/fa62b941-10fe-4989-b583-a7d43755c71en%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/openwisp/fa62b941-10fe-4989-b583-a7d43755c71en%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/openwisp/9166430c-4502-47c9-aa0e-602810b29b92n%40googlegroups.com.
