With joy :)
{
"interfaces": [
{
"type": "ethernet",
"name": "br0.10",
"mtu": 1500,
"disabled": false,
"network": "br0_vlan10",
"mac": "",
"autostart": true,
"addresses": [
{
"proto": "dhcp",
"family": "ipv4"
}
]
}
],
"network": [
{
"config_name": "bridge-vlan",
"config_value": "bridge_vlan10",
"device": "br0",
"vlan": 10,
"ports": [
"wan:t",
"lan1:t",
"lan2:t",
"lan3:t",
"lan4:t"
]
}
]
}
пятница, 10 июня 2022 г. в 16:41:53 UTC+3, f.capoano:
> I am glad you found a way around it, as soon as possible we'll implement
> support for accomplishing this more easily (issue: [feature] Add support
> for DSA <https://github.com/openwisp/netjsonconfig/issues/195>).
> In the meantime, if you could go to "advanced mode", copy the JSON output
> you see and send it here it may help somebody else like you who may need to
> do the same while the new feature is not ready.
>
> Best regards
> Federico Capoano
>
> On Fri, Jun 10, 2022 at 6:07 AM NIKOLYA PRODIGY <[email protected]>
> wrote:
>
>> [image: openwisp dsa.png]
>>
>> That's so much to draw to get
>>
>> config bridge-vlan 'bridge_vlan10'
>> option device 'br0'
>> list ports 'wan:t'
>> list ports 'lan1:t'
>> list ports 'lan2:t'
>> list ports 'lan3:t'
>> list ports 'lan4:t'
>> option vlan '10'
>>
>>
>> вторник, 24 мая 2022 г. в 21:01:32 UTC+3, [email protected]:
>>
>>> Hi and welcome,
>>>
>>> DSA syntax is realtively new and we have not been able to implement it
>>> fully yet, there's an open issue for this:
>>> https://github.com/openwisp/netjsonconfig/issues/195.
>>>
>>> It should be possible though to be able to accomplish this using the
>>> advanced mode of OpenWISP controller and the custom netjsonconfig syntax
>>> <http://netjsonconfig.openwisp.org/en/latest/backends/openwrt.html#all-the-other-settings>
>>> .
>>>
>>> I hope this helps and I hope you'll be able to solve it.
>>>
>>> Best regards
>>> Federico
>>>
>>> On Monday, May 23, 2022 at 5:21:37 AM UTC-4 [email protected] wrote:
>>>
>>>> Hello.
>>>> I use MT7621 CPU routers that don't have a separate switch.
>>>> Nevertheless, in the openwrt settings, I can create an 802.1q interface
>>>> or work with vlan via bridge vlan filtring, but I did not find such
>>>> functionality in openwisp.
>>>> The programmable switch is not suitable for me, since this setting is
>>>> for routers that have a separate HW switch.
>>>> Is there any way to implement this support?
>>>>
>>>> config bridge-vlan
>>>> option device 'br0'
>>>> option vlan '1'
>>>> list ports 'lan1'
>>>> list ports 'lan2'
>>>> list ports 'lan3'
>>>> list ports 'wan'
>>>>
>>>> config bridge-vlan
>>>> option device 'br0'
>>>> option vlan '10'
>>>> list ports 'lan4:u*'
>>>> list ports 'wan:t'
>>>>
>>>> Here bridge and management are in vlan 1 and port 4 of vlan 10
>>>>
>>>> and 802.1q
>>>>
>>>> config device
>>>> option type '8021q'
>>>> option ifname 'br0'
>>>> option vid '10'
>>>> option name 'eth0.10'
>>>>
>>> --
>> You received this message because you are subscribed to the Google Groups
>> "OpenWISP" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> To view this discussion on the web, visit
>> https://groups.google.com/d/msgid/openwisp/165f502e-2d7d-473d-83d1-57149400bf28n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/openwisp/165f502e-2d7d-473d-83d1-57149400bf28n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/openwisp/1d451349-1b51-46d0-a332-4324a8bb3f34n%40googlegroups.com.
