Ignore the "list ports '*eth0.22*' " typo. VLAN id is not relevant here - bridge and device work on eth, just not when i want to add wifi to it.
On Tuesday, 20 December 2022 at 09:40:24 UTC+1 J H wrote: > hi > > On OWRT 21.x / 22.x I already have a working cfg, but i wanted to deploy > it via latest OpenWisp > > radio0 (5Ghz) and radio1 (2Ghz) with same SSid and bound to same network > and bridge vlan 10 on eth0: > > config device 'device5' > option bridge_empty '1' > option name '*br-iot*' > list ports '*eth0.10*' > option type '*bridge*' > > config wifi-iface 'wifinet9' > option device '*radio0*' > option mode 'ap' > option network '*lan_iot*' > option disabled '0' > option ssid 'iot' > > config wifi-iface 'wifinet10' > option device '*radio1*' > option mode 'ap' > option network '*lan_iot*' > option disabled '0' > option ssid 'iot' > > config interface '*lan_iot*' > option proto 'none' > option device '*br-iot*' > > > When i try to this this via OpenWisp i get this config which does not work: > > config device 'device_lan_iot' > option name '*br_iot*' > list ports '*eth0.22*' > option type 'bridge' > > config interface 'lan_iot' > option auto '1' > option bridge_empty '1' > option device '*br_iot*' > option enabled '1' > option proto 'none' > > config device 'device_lan_iot' > option mtu '1500' > option name '*iot5*' > > config interface 'lan_iot' > option auto '1' > option device '*iot5*' > option enabled '1' > option proto 'none' > > config device 'device_lan_iot' > option mtu '1500' > option name '*iot2*' > > config interface 'lan_iot' > option auto '1' > option device '*iot2*' > option enabled '1' > option proto 'none' > > package wireless > > config wifi-device 'radio0' > option disabled '0' > > config wifi-device 'radio1' > option disabled '0' > > config wifi-iface 'wifi_iot5' > option device 'radio0' > option disabled '0' > *option ifname 'iot5'* > option mode 'ap' > option network '*lan_iot*' > option ssid 'iot' > > config wifi-iface 'wifi_iot2' > option device 'radio1' > option disabled '0' > > *option ifname 'iot2'* option mode 'ap' > option network '*lan_iot*' > option ssid 'iot' > > > Why are ifname used and devices built that are not used ? If i add iot2 or > iot5 interfaces as bridge members then deployment also fails. > Is it possible to built a cfg w/o ifnames and those interfaces ? Because > that config works - just use network in wifi-ifaces. > > thank you > > > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/f9c4d66c-2ab4-40f6-9e4a-c1353fde7da7n%40googlegroups.com.
