Author: hauke
Date: 2014-07-06 19:51:14 +0200 (Sun, 06 Jul 2014)
New Revision: 41531

Added:
   trunk/target/linux/gemini/config-3.10
   trunk/target/linux/gemini/patches-3.10/
Removed:
   
trunk/target/linux/gemini/patches-3.10/000-ARM-gemini-get-platform-to-build-again.patch
Modified:
   
trunk/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch
   trunk/target/linux/gemini/patches-3.10/140-arm-gemini-add-pci-support.patch
Log:
gemini: add support for kernel 3.10

This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <[email protected]>


Copied: trunk/target/linux/gemini/config-3.10 (from rev 41530, 
trunk/target/linux/gemini/config-default)
===================================================================
--- trunk/target/linux/gemini/config-3.10                               (rev 0)
+++ trunk/target/linux/gemini/config-3.10       2014-07-06 17:51:14 UTC (rev 
41531)
@@ -0,0 +1,169 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_GEMINI=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_USES_GETTIMEOFFSET=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARPD is not set
+CONFIG_ATA=m
+CONFIG_ATAGS=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd 
console=ttyS0,19200 mem=32M"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_FA=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FA=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_FA526=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_TLB_FA=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_USER is not set
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_DMADEVICES=y
+CONFIG_DNOTIFY=y
+# CONFIG_DSCC4 is not set
+# CONFIG_FARSYNC is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_GEMINI_MEM_SWAP=y
+CONFIG_GEMINI_NET_ENGINE_GMAC=y
+CONFIG_GEMINI_WATCHDOG=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HDLC=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_RAW=m
+CONFIG_HWMON=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_WORK=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_MACH_NAS4220B is not set
+# CONFIG_MACH_RUT100 is not set
+CONFIG_MACH_WBD111=y
+CONFIG_MACH_WBD222=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_MACH_GPIO_H=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=m
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_STALL_COMMON is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_MOD=m
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UID16=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
+CONFIG_USB=m
+CONFIG_USB_ARCH_HAS_XHCI=y
+CONFIG_USB_COMMON=m
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0

Deleted: 
trunk/target/linux/gemini/patches-3.10/000-ARM-gemini-get-platform-to-build-again.patch
===================================================================
--- 
trunk/target/linux/gemini/patches/000-ARM-gemini-get-platform-to-build-again.patch
  2014-07-06 17:21:37 UTC (rev 41530)
+++ 
trunk/target/linux/gemini/patches-3.10/000-ARM-gemini-get-platform-to-build-again.patch
     2014-07-06 17:51:14 UTC (rev 41531)
@@ -1,348 +0,0 @@
-From patchwork Fri Jan  4 15:30:38 2013
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [RFC,1/3] ARM: gemini: get platform to build again
-Date: Fri, 04 Jan 2013 15:30:38 -0000
-From: Arnd Bergmann <[email protected]>
-X-Patchwork-Id: 1933501
-Message-Id: <[email protected]>
-To: Hans Ulli Kroll <[email protected]>
-Cc: Russell King <[email protected]>, Arnd Bergmann <[email protected]>, 
- Florian Fainelli <[email protected]>,
- [email protected]
-
-There is no defconfig file for gemini, which has lead to a lot
-of bitrot. This makes the broken board files, the gpio implementation
-and the reset logic work again, and fixes the build warnings
-that got introduced with the changes to the readl/writel prototypes.
-
-Signed-off-by: Arnd Bergmann <[email protected]>
-
----
-(retransmitted because the original was rejected by linux-arm-kernel)
-
- arch/arm/Kconfig                             |    1 +
- arch/arm/mach-gemini/Makefile                |    2 +-
- arch/arm/mach-gemini/board-nas4220b.c        |    1 +
- arch/arm/mach-gemini/board-rut1xx.c          |    2 ++
- arch/arm/mach-gemini/board-wbd111.c          |    1 +
- arch/arm/mach-gemini/board-wbd222.c          |    1 +
- arch/arm/mach-gemini/common.h                |    2 ++
- arch/arm/mach-gemini/gpio.c                  |   19 ++++++++++---------
- arch/arm/mach-gemini/include/mach/hardware.h |    2 +-
- arch/arm/mach-gemini/include/mach/system.h   |   23 -----------------------
- arch/arm/mach-gemini/irq.c                   |    4 ++--
- arch/arm/mach-gemini/mm.c                    |   22 +++++++++++-----------
- arch/arm/mach-gemini/reset.c                 |   23 +++++++++++++++++++++++
- 13 files changed, 56 insertions(+), 47 deletions(-)
- delete mode 100644 arch/arm/mach-gemini/include/mach/system.h
- create mode 100644 arch/arm/mach-gemini/reset.c
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -410,6 +410,7 @@ config ARCH_GEMINI
-       bool "Cortina Systems Gemini"
-       select ARCH_REQUIRE_GPIOLIB
-       select ARCH_USES_GETTIMEOFFSET
-+      select NEED_MACH_GPIO_H
-       select CPU_FA526
-       help
-         Support for the Cortina Systems Gemini family SoCs
---- a/arch/arm/mach-gemini/Makefile
-+++ b/arch/arm/mach-gemini/Makefile
-@@ -4,7 +4,7 @@
- 
- # Object file lists.
- 
--obj-y                 := irq.o mm.o time.o devices.o gpio.o idle.o
-+obj-y                 := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
- 
- # Board-specific support
- obj-$(CONFIG_MACH_NAS4220B)   += board-nas4220b.o
---- a/arch/arm/mach-gemini/board-nas4220b.c
-+++ b/arch/arm/mach-gemini/board-nas4220b.c
-@@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS I
-       .init_irq       = gemini_init_irq,
-       .init_time      = gemini_timer_init,
-       .init_machine   = ib4220b_init,
-+      .restart        = gemini_restart,
- MACHINE_END
---- a/arch/arm/mach-gemini/board-rut1xx.c
-+++ b/arch/arm/mach-gemini/board-rut1xx.c
-@@ -14,6 +14,7 @@
- #include <linux/leds.h>
- #include <linux/input.h>
- #include <linux/gpio_keys.h>
-+#include <linux/sizes.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100"
-       .init_irq       = gemini_init_irq,
-       .init_time      = gemini_timer_init,
-       .init_machine   = rut1xx_init,
-+      .restart        = gemini_restart,
- MACHINE_END
---- a/arch/arm/mach-gemini/board-wbd111.c
-+++ b/arch/arm/mach-gemini/board-wbd111.c
-@@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111
-       .init_irq       = gemini_init_irq,
-       .init_time      = gemini_timer_init,
-       .init_machine   = wbd111_init,
-+      .restart        = gemini_restart,
- MACHINE_END
---- a/arch/arm/mach-gemini/board-wbd222.c
-+++ b/arch/arm/mach-gemini/board-wbd222.c
-@@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222
-       .init_irq       = gemini_init_irq,
-       .init_time      = gemini_timer_init,
-       .init_machine   = wbd222_init,
-+      .restart        = gemini_restart,
- MACHINE_END
---- a/arch/arm/mach-gemini/common.h
-+++ b/arch/arm/mach-gemini/common.h
-@@ -26,4 +26,6 @@ extern int platform_register_pflash(unsi
-                                   struct mtd_partition *parts,
-                                   unsigned int nr_parts);
- 
-+extern void gemini_restart(char mode, const char *cmd);
-+
- #endif /* __GEMINI_COMMON_H__ */
---- a/arch/arm/mach-gemini/gpio.c
-+++ b/arch/arm/mach-gemini/gpio.c
-@@ -21,6 +21,7 @@
- 
- #include <mach/hardware.h>
- #include <mach/irqs.h>
-+#include <mach/gpio.h>
- 
- #define GPIO_BASE(x)          IO_ADDRESS(GEMINI_GPIO_BASE(x))
- 
-@@ -44,7 +45,7 @@
- 
- #define GPIO_PORT_NUM         3
- 
--static void _set_gpio_irqenable(unsigned int base, unsigned int index,
-+static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
-                               int enable)
- {
-       unsigned int reg;
-@@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned
- static void gpio_ack_irq(struct irq_data *d)
- {
-       unsigned int gpio = irq_to_gpio(d->irq);
--      unsigned int base = GPIO_BASE(gpio / 32);
-+      void __iomem *base = GPIO_BASE(gpio / 32);
- 
-       __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
- }
-@@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data
- static void gpio_mask_irq(struct irq_data *d)
- {
-       unsigned int gpio = irq_to_gpio(d->irq);
--      unsigned int base = GPIO_BASE(gpio / 32);
-+      void __iomem *base = GPIO_BASE(gpio / 32);
- 
-       _set_gpio_irqenable(base, gpio % 32, 0);
- }
-@@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_dat
- static void gpio_unmask_irq(struct irq_data *d)
- {
-       unsigned int gpio = irq_to_gpio(d->irq);
--      unsigned int base = GPIO_BASE(gpio / 32);
-+      void __iomem *base = GPIO_BASE(gpio / 32);
- 
-       _set_gpio_irqenable(base, gpio % 32, 1);
- }
-@@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_
- {
-       unsigned int gpio = irq_to_gpio(d->irq);
-       unsigned int gpio_mask = 1 << (gpio % 32);
--      unsigned int base = GPIO_BASE(gpio / 32);
-+      void __iomem *base = GPIO_BASE(gpio / 32);
-       unsigned int reg_both, reg_level, reg_type;
- 
-       reg_type = __raw_readl(base + GPIO_INT_TYPE);
-@@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_
-       __raw_writel(reg_level, base + GPIO_INT_LEVEL);
-       __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
- 
--      gpio_ack_irq(d->irq);
-+      gpio_ack_irq(d);
- 
-       return 0;
- }
-@@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = {
- static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
-                               int dir)
- {
--      unsigned int base = GPIO_BASE(offset / 32);
-+      void __iomem *base = GPIO_BASE(offset / 32);
-       unsigned int reg;
- 
-       reg = __raw_readl(base + GPIO_DIR);
-@@ -166,7 +167,7 @@ static void _set_gpio_direction(struct g
- 
- static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int 
value)
- {
--      unsigned int base = GPIO_BASE(offset / 32);
-+      void __iomem *base = GPIO_BASE(offset / 32);
- 
-       if (value)
-               __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
-@@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_
- 
- static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
- {
--      unsigned int base = GPIO_BASE(offset / 32);
-+      void __iomem *base = GPIO_BASE(offset / 32);
- 
-       return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
- }
---- a/arch/arm/mach-gemini/include/mach/hardware.h
-+++ b/arch/arm/mach-gemini/include/mach/hardware.h
-@@ -69,6 +69,6 @@
- /*
-  * macro to get at IO space when running virtually
-  */
--#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 
0xF0000000)
-+#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 
0xF0000000)
- 
- #endif
---- a/arch/arm/mach-gemini/include/mach/system.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--/*
-- *  Copyright (C) 2001-2006 Storlink, Corp.
-- *  Copyright (C) 2008-2009 Paulius Zaleckas <[email protected]>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- */
--#ifndef __MACH_SYSTEM_H
--#define __MACH_SYSTEM_H
--
--#include <linux/io.h>
--#include <mach/hardware.h>
--#include <mach/global_reg.h>
--
--static inline void arch_reset(char mode, const char *cmd)
--{
--      __raw_writel(RESET_GLOBAL | RESET_CPU1,
--                   IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
--}
--
--#endif /* __MACH_SYSTEM_H */
---- a/arch/arm/mach-gemini/irq.c
-+++ b/arch/arm/mach-gemini/irq.c
-@@ -65,8 +65,8 @@ static struct irq_chip gemini_irq_chip =
- 
- static struct resource irq_resource = {
-       .name   = "irq_handler",
--      .start  = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
--      .end    = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
-+      .start  = GEMINI_INTERRUPT_BASE,
-+      .end    = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
- };
- 
- void __init gemini_init_irq(void)
---- a/arch/arm/mach-gemini/mm.c
-+++ b/arch/arm/mach-gemini/mm.c
-@@ -19,57 +19,57 @@
- /* Page table mapping for I/O region */
- static struct map_desc gemini_io_desc[] __initdata = {
-       {
--              .virtual        = IO_ADDRESS(GEMINI_GLOBAL_BASE),
-+              .virtual        = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
-               .pfn            =__phys_to_pfn(GEMINI_GLOBAL_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_UART_BASE),
-+              .virtual        = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_UART_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_TIMER_BASE),
-+              .virtual        = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_TIMER_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_GPIO_BASE(0)),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
-               .pfn            = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_GPIO_BASE(1)),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
-               .pfn            = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_GPIO_BASE(2)),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
-               .pfn            = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
-       }, {
--              .virtual        = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
-+              .virtual        = (unsigned 
long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
-               .pfn            = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
-               .length         = SZ_512K,
-               .type           = MT_DEVICE,
---- /dev/null
-+++ b/arch/arm/mach-gemini/reset.c
-@@ -0,0 +1,23 @@
-+/*
-+ *  Copyright (C) 2001-2006 Storlink, Corp.
-+ *  Copyright (C) 2008-2009 Paulius Zaleckas <[email protected]>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#ifndef __MACH_SYSTEM_H
-+#define __MACH_SYSTEM_H
-+
-+#include <linux/io.h>
-+#include <mach/hardware.h>
-+#include <mach/global_reg.h>
-+
-+void gemini_restart(char mode, const char *cmd)
-+{
-+      __raw_writel(RESET_GLOBAL | RESET_CPU1,
-+                   IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
-+}
-+
-+#endif /* __MACH_SYSTEM_H */

Modified: 
trunk/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch
===================================================================
--- trunk/target/linux/gemini/patches/130-usb-ehci-gemini-fot2gxx-support.patch 
2014-07-06 17:21:37 UTC (rev 41530)
+++ 
trunk/target/linux/gemini/patches-3.10/130-usb-ehci-gemini-fot2gxx-support.patch
    2014-07-06 17:51:14 UTC (rev 41531)
@@ -462,7 +462,7 @@
 +};
 --- a/drivers/usb/host/ehci.h
 +++ b/drivers/usb/host/ehci.h
-@@ -600,7 +600,12 @@ static inline unsigned int
+@@ -603,7 +603,12 @@ static inline unsigned int
  ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
  {
        if (ehci_is_TDI(ehci)) {
@@ -523,7 +523,7 @@
        spin_unlock_irq(&ehci->lock);
  }
  
-@@ -600,7 +609,9 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -603,7 +612,9 @@ static int ehci_run (struct usb_hcd *hcd
        // Philips, Intel, and maybe others need CMD_RUN before the
        // root hub will detect new devices (why?); NEC doesn't
        ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
@@ -533,7 +533,7 @@
        ehci_writel(ehci, ehci->command, &ehci->regs->command);
        dbg_cmd (ehci, "init", ehci->command);
  
-@@ -620,9 +631,11 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -623,9 +634,11 @@ static int ehci_run (struct usb_hcd *hcd
         */
        down_write(&ehci_cf_port_reset_rwsem);
        ehci->rh_state = EHCI_RH_RUNNING;
@@ -545,7 +545,7 @@
        up_write(&ehci_cf_port_reset_rwsem);
        ehci->last_periodic_enable = ktime_get_real();
  
-@@ -1238,6 +1251,11 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -1228,6 +1241,11 @@ MODULE_DESCRIPTION(DRIVER_DESC);
  MODULE_AUTHOR (DRIVER_AUTHOR);
  MODULE_LICENSE ("GPL");
  
@@ -559,7 +559,7 @@
  #define       PLATFORM_DRIVER         ehci_fsl_driver
 --- a/drivers/usb/host/ehci-hub.c
 +++ b/drivers/usb/host/ehci-hub.c
-@@ -912,6 +912,12 @@ static int ehci_hub_control (
+@@ -914,6 +914,12 @@ static int ehci_hub_control (
                        /* see what we found out */
                        temp = check_reset_complete (ehci, wIndex, status_reg,
                                        ehci_readl(ehci, status_reg));

Modified: 
trunk/target/linux/gemini/patches-3.10/140-arm-gemini-add-pci-support.patch
===================================================================
--- trunk/target/linux/gemini/patches/140-arm-gemini-add-pci-support.patch      
2014-07-06 17:21:37 UTC (rev 41530)
+++ trunk/target/linux/gemini/patches-3.10/140-arm-gemini-add-pci-support.patch 
2014-07-06 17:51:14 UTC (rev 41531)
@@ -1,6 +1,6 @@
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -412,6 +412,7 @@ config ARCH_GEMINI
+@@ -381,6 +381,7 @@ config ARCH_GEMINI
        select ARCH_USES_GETTIMEOFFSET
        select NEED_MACH_GPIO_H
        select CPU_FA526
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits

Reply via email to