[OpenWrt-Commits] r41663 - trunk/target/linux/brcm47xx/base-files/etc/init.d

[openwrt-commits]

Author: hauke
Date: 2014-07-15 00:16:19 +0200 (Tue, 15 Jul 2014)
New Revision: 41663

Modified:
   trunk/target/linux/brcm47xx/base-files/etc/init.d/netconfig
Log:
brcm47xx: fix special board handling for some devices

Some devices were renamed when converted from diag to in kernel board detection 
and it was not changed in netconfig. Devices not in the 
kernel board detection are removed now.

This should close: #17111, #16968, #13202

Signed-off-by: Hauke Mehrtens <ha...@hauke-m.de>



Modified: trunk/target/linux/brcm47xx/base-files/etc/init.d/netconfig
===================================================================
--- trunk/target/linux/brcm47xx/base-files/etc/init.d/netconfig 2014-07-14 
22:03:59 UTC (rev 41662)
+++ trunk/target/linux/brcm47xx/base-files/etc/init.d/netconfig 2014-07-14 
22:16:19 UTC (rev 41663)
@@ -105,21 +105,21 @@
                        c["vlan1ports"] = "0 1 2 3 5t"
                        c["vlan2ports"] = "4 5t"
                }
-               if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || 
(model == "Linksys WAP54G V1")) {
+               if ((model == "Asus WLHDD") || (model == "Asus WL300G")) {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth1"
                }
-               if (model == "ASUS WL-330gE") {
+               if (model == "Asus WL330GE") {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth0.1"
                        c["vlan1ports"] = "4 5t"
                        c["vlan2ports"] = ""
                }
-               if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) 
{
+               if ((model == "Asus WL500G") || (model == "Microsoft MN-700")) {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
                }
-               if ((model == "ASUS WL-500g Premium V2") || (model == "Dell 
TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
+               if ((model == "Asus WL500GP V2") || (model == "Buffalo 
WHR-G125")) {
                        c["vlan1ports"] = "0 1 2 3 5t"
                        c["vlan2ports"] = "4 5t"
                }
@@ -183,34 +183,22 @@
                # These are actually same as defaults above. For some reason 
this script applies
                # Generic BCM94704 settings instead so we revert to proper 
settings here.
                # Hopefully someone will fix this properly soon.
-               if (model == "ASUS WL-700gE") {
+               if (model == "Asus WL700") {
                        c["lan_ifname"]="eth0.1"
                        c["wan_ifname"]="eth0.2"
                        c["vlan1ports"]="1 2 3 4 5t"
                        c["vlan2ports"]="0 5t"
                }
-               if ((model == "Motorola WR850G V2/V3") || (model == "Siemens 
SE505 V2")) {
+               if ((model == "Motorola WR850G") || (model == "Siemens SE505 
V2")) {
                        c["vlan1ports"]="0 1 2 3 5t"
                        c["vlan2ports"]="4 5t"
                }
-               if (model == "ASUS WL-500W") {
+               if (model == "Asus WL500W") {
                        c["lan_ifname"] = "eth0"
                        c["wan_ifname"] = "eth1"
                        c["vlan1ports"] = "0 1 2 3 4 5"
                        c["vlan2ports"] = ""
                }
-               if (model == "OvisLink WL-1600GL") {
-                       c["lan_ifname"] = "eth0.1"
-                       c["wan_ifname"] = "eth0.2"
-                       c["vlan1ports"] = "0 1 2 3 5t"
-                       c["vlan2ports"] = "4 5t"
-               }
-               if (model == "SimpleTech SimpleShare NAS") {
-                       c["lan_ifname"] = "eth0"
-                       c["wan_ifname"] = ""
-                       c["vlan1ports"] = ""
-                       c["vlan2ports"] = ""
-               }
                print "local vlan1ports=\"" c["vlan1ports"] "\";"
                print "local vlan2ports=\"" c["vlan2ports"] "\";"
                print "local lan_ifname=\"" c["lan_ifname"] "\";"
_______________________________________________
openwrt-commits mailing list
openwrt-commits@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits