Author: blogic Date: 2014-09-12 08:53:15 +0200 (Fri, 12 Sep 2014) New Revision: 42503
Modified: trunk/target/linux/atheros/patches-3.14/100-board.patch trunk/target/linux/atheros/patches-3.14/105-ar2315_pci.patch Log: atheros: ar2315-pci: update host bridge resources It seems that the PCI controller does not support I/O ports, so remove the ports range. Also correct the beginning of the memory range and its size. Signed-off-by: Sergey Ryazanov <[email protected]> Modified: trunk/target/linux/atheros/patches-3.14/100-board.patch =================================================================== --- trunk/target/linux/atheros/patches-3.14/100-board.patch 2014-09-12 06:53:09 UTC (rev 42502) +++ trunk/target/linux/atheros/patches-3.14/100-board.patch 2014-09-12 06:53:15 UTC (rev 42503) @@ -674,7 +674,7 @@ +#endif /* __ASM_MACH_AR231X_WAR_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h -@@ -0,0 +1,624 @@ +@@ -0,0 +1,625 @@ +/* + * Register definitions for AR2315+ + * @@ -738,6 +738,7 @@ +#define AR2315_UART0 0x11100000 /* UART MMR */ +#define AR2315_SPI_MMR 0x11300000 /* SPI FLASH MMR */ +#define AR2315_PCIEXT 0x80000000 /* pci external */ ++#define AR2315_PCIEXT_SZ 0x40000000 + +/* MII registers offset inside Ethernet MMR region */ +#define AR2315_ENET0_MII (AR2315_ENET0 + 0x14) Modified: trunk/target/linux/atheros/patches-3.14/105-ar2315_pci.patch =================================================================== --- trunk/target/linux/atheros/patches-3.14/105-ar2315_pci.patch 2014-09-12 06:53:09 UTC (rev 42502) +++ trunk/target/linux/atheros/patches-3.14/105-ar2315_pci.patch 2014-09-12 06:53:15 UTC (rev 42503) @@ -7,7 +7,7 @@ +obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o --- /dev/null +++ b/arch/mips/ar231x/pci.c -@@ -0,0 +1,350 @@ +@@ -0,0 +1,337 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License @@ -61,10 +61,6 @@ +#include <ar2315_regs.h> +#include "devices.h" + -+#define AR2315_MEM_BASE 0x80800000UL -+#define AR2315_MEM_SIZE 0x00ffffffUL -+#define AR2315_IO_SIZE 0x00007fffUL -+ +/* Arbitrary size of memory region to access the configuration space */ +#define AR2315_PCI_CFG_SIZE 0x00100000 + @@ -160,16 +156,16 @@ + +static struct resource ar2315_mem_resource = { + .name = "ar2315-pci-mem", -+ .start = AR2315_MEM_BASE, -+ .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE - 1 + -+ 0x4000000, ++ .start = AR2315_PCIEXT, ++ .end = AR2315_PCIEXT + AR2315_PCIEXT_SZ - 1, + .flags = IORESOURCE_MEM, +}; + ++/* PCI controller does not support I/O ports */ +static struct resource ar2315_io_resource = { + .name = "ar2315-pci-io", -+ .start = AR2315_MEM_BASE + AR2315_MEM_SIZE - AR2315_IO_SIZE, -+ .end = AR2315_MEM_BASE + AR2315_MEM_SIZE - 1, ++ .start = 0, ++ .end = 0, + .flags = IORESOURCE_IO, +}; + @@ -298,11 +294,6 @@ + return -ENOMEM; + } + -+ ar2315_pci_controller.io_map_base = -+ (unsigned long)ioremap_nocache(AR2315_MEM_BASE + -+ AR2315_MEM_SIZE, AR2315_IO_SIZE); -+ set_io_port_base(ar2315_pci_controller.io_map_base); /* PCI I/O space*/ -+ + /* Reset PCI DMA logic */ + reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); + msleep(20); @@ -338,10 +329,6 @@ + + msleep(500); + -+ /* dirty hack - anyone with a datasheet that knows the memory map ? */ -+ ioport_resource.start = 0x10000000; -+ ioport_resource.end = 0xffffffff; -+ + res = ar2315_pci_host_setup(); + if (res) + goto error; _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
