Author: rmilecki
Date: 2014-09-21 23:02:38 +0200 (Sun, 21 Sep 2014)
New Revision: 42637
Added:
trunk/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch
Removed:
trunk/target/linux/bcm53xx/patches-3.14/060-ARM-BCM5301X-fix-early-serial-console.patch
Log:
bcm53xx: rename console fixing patch
This squeezes BCM5301X patches.
Copied:
trunk/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch
(from rev 42636,
trunk/target/linux/bcm53xx/patches-3.14/060-ARM-BCM5301X-fix-early-serial-console.patch)
===================================================================
---
trunk/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch
(rev 0)
+++
trunk/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch
2014-09-21 21:02:38 UTC (rev 42637)
@@ -0,0 +1,33 @@
+From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <[email protected]>
+Date: Sun, 14 Sep 2014 21:02:35 +0200
+Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
+
+This device actually has a 8250 serial with a shift of 0.
+Tested this on a BCM4708.
+
+Signed-off-by: Hauke Mehrtens <[email protected]>
+---
+ arch/arm/Kconfig.debug | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -109,7 +109,7 @@ choice
+ config DEBUG_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X UART1"
+ depends on ARCH_BCM_5301X
+- select DEBUG_UART_PL01X
++ select DEBUG_UART_8250
+
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
+ config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+- default 0 if FOOTBRIDGE || ARCH_IOP32X
++ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+ default 2
+
+ config DEBUG_UART_8250_WORD
Deleted:
trunk/target/linux/bcm53xx/patches-3.14/060-ARM-BCM5301X-fix-early-serial-console.patch
===================================================================
---
trunk/target/linux/bcm53xx/patches-3.14/060-ARM-BCM5301X-fix-early-serial-console.patch
2014-09-21 20:31:18 UTC (rev 42636)
+++
trunk/target/linux/bcm53xx/patches-3.14/060-ARM-BCM5301X-fix-early-serial-console.patch
2014-09-21 21:02:38 UTC (rev 42637)
@@ -1,33 +0,0 @@
-From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <[email protected]>
-Date: Sun, 14 Sep 2014 21:02:35 +0200
-Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <[email protected]>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -109,7 +109,7 @@ choice
- config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
-- select DEBUG_UART_PL01X
-+ select DEBUG_UART_8250
-
- config DEBUG_BCM_KONA_UART
- bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
- int "Register offset shift for the 8250 debug UART"
- depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-- default 0 if FOOTBRIDGE || ARCH_IOP32X
-+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
- default 2
-
- config DEBUG_UART_8250_WORD
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
