Author: kaloz
Date: 2014-11-05 15:37:13 +0100 (Wed, 05 Nov 2014)
New Revision: 43186
Added:
trunk/target/linux/ramips/dts/E1700.dts
trunk/target/linux/ramips/mt7620a/profiles/linksys.mk
Modified:
trunk/target/linux/ramips/base-files/etc/board.d/02_network
trunk/target/linux/ramips/base-files/etc/diag.sh
trunk/target/linux/ramips/base-files/lib/ramips.sh
trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh
trunk/target/linux/ramips/image/Makefile
Log:
[ramips]: add support for the Linksys E1700
Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network
===================================================================
--- trunk/target/linux/ramips/base-files/etc/board.d/02_network 2014-11-05
14:21:51 UTC (rev 43185)
+++ trunk/target/linux/ramips/base-files/etc/board.d/02_network 2014-11-05
14:37:13 UTC (rev 43186)
@@ -221,6 +221,7 @@
ucidef_set_interface_lan "eth0"
;;
+ e1700 | \
mt7620a_mt7530)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch1" "1" "1"
@@ -302,6 +303,10 @@
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
;;
+ e1700)
+ wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
+ ;;
+
wcr-150gn)
wan_mac=$(mtd_get_mac_binary factory 40)
;;
Modified: trunk/target/linux/ramips/base-files/etc/diag.sh
===================================================================
--- trunk/target/linux/ramips/base-files/etc/diag.sh 2014-11-05 14:21:51 UTC
(rev 43185)
+++ trunk/target/linux/ramips/base-files/etc/diag.sh 2014-11-05 14:37:13 UTC
(rev 43186)
@@ -48,6 +48,9 @@
dap-1350)
status_led="d-link:blue:power"
;;
+ e1700)
+ status_led="linksys:green:power"
+ ;;
esr-9753)
status_led="esr-9753:orange:power"
;;
Modified: trunk/target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- trunk/target/linux/ramips/base-files/lib/ramips.sh 2014-11-05 14:21:51 UTC
(rev 43185)
+++ trunk/target/linux/ramips/base-files/lib/ramips.sh 2014-11-05 14:37:13 UTC
(rev 43186)
@@ -175,6 +175,9 @@
*"Kingston MLW221")
name="mlw221"
;;
+ *"Linksys E1700")
+ name="e1700"
+ ;;
*"Planex MZK-750DHP")
name="mzk-750dhp"
;;
Modified: trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh
===================================================================
--- trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh
2014-11-05 14:21:51 UTC (rev 43185)
+++ trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh
2014-11-05 14:37:13 UTC (rev 43186)
@@ -44,6 +44,7 @@
dir-620-a1 | \
dir-620-d1 | \
dir-810l | \
+ e1700 | \
esr-9753 | \
f7c027 | \
fonera20n | \
Added: trunk/target/linux/ramips/dts/E1700.dts
===================================================================
--- trunk/target/linux/ramips/dts/E1700.dts (rev 0)
+++ trunk/target/linux/ramips/dts/E1700.dts 2014-11-05 14:37:13 UTC (rev
43186)
@@ -0,0 +1,148 @@
+/*
+ * Device Tree file for the Linksys E1700
+ *
+ * Copyright (C) 2014 Imre Kaloz <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "linksys,e1700", "ralink,mt7620a-soc";
+ model = "Linksys E1700";
+
+ palmbus@10000000 {
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+
+ mtd-mac-address = <&factory 0x28>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+ ralink,port-map = "llllw";
+
+ port@5 {
+ status = "okay";
+ ralink,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+ phy1f: ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "gmac";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 0>;
+ linux,code = <0x198>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 0>;
+ linux,code = <0x211>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "linksys:green:power";
+ gpios = <&gpio0 10 1>;
+ };
+ wan {
+ label = "linksys:green:wps";
+ gpios = <&gpio0 12 1>;
+ };
+ };
+};
Modified: trunk/target/linux/ramips/image/Makefile
===================================================================
--- trunk/target/linux/ramips/image/Makefile 2014-11-05 14:21:51 UTC (rev
43185)
+++ trunk/target/linux/ramips/image/Makefile 2014-11-05 14:37:13 UTC (rev
43186)
@@ -772,6 +772,7 @@
# MT7620A Profiles
#
+Image/Build/Profile/E1700=$(call
BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
Image/Build/Profile/MT7620a=$(call
BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
Image/Build/Profile/MT7620a_MT7610e=$(call
BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
Image/Build/Profile/MT7620a_MT7530=$(call
BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
@@ -792,6 +793,7 @@
ifeq ($(SUBTARGET),mt7620a)
define Image/Build/Profile/Default
+ $(call Image/Build/Profile/E1700,$(1))
$(call Image/Build/Profile/MT7620a,$(1))
$(call Image/Build/Profile/MT7620a_MT7610e,$(1))
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
Added: trunk/target/linux/ramips/mt7620a/profiles/linksys.mk
===================================================================
--- trunk/target/linux/ramips/mt7620a/profiles/linksys.mk
(rev 0)
+++ trunk/target/linux/ramips/mt7620a/profiles/linksys.mk 2014-11-05
14:37:13 UTC (rev 43186)
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/E1700
+ NAME:=Linksys E1700
+ PACKAGES:=swconfig
+endef
+
+define Profile/E1700/Description
+ Package set compatible with the Linksys E1700.
+endef
+$(eval $(call Profile,E1700))
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
