Author: luka Date: 2014-11-11 01:05:14 +0100 (Tue, 11 Nov 2014) New Revision: 43231
Modified: trunk/target/linux/ramips/dts/DCS-930.dts Log: ralink: update DCS-930 dts * read MAC address from factory partition * remove port defines since there is only one port (most likely C/P error) Signed-off-by: Luka Perkov <[email protected]> Modified: trunk/target/linux/ramips/dts/DCS-930.dts =================================================================== --- trunk/target/linux/ramips/dts/DCS-930.dts 2014-11-10 23:55:10 UTC (rev 43230) +++ trunk/target/linux/ramips/dts/DCS-930.dts 2014-11-11 00:05:14 UTC (rev 43231) @@ -92,34 +92,12 @@ }; }; + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + esw@10110000 { ralink,portmap = <0x2f>; - - port@0 { - compatible = "swconfig,port"; - swconfig,segment = "lan"; - swconfig,portmap = <0 4>; - }; - port@1 { - compatible = "swconfig,port"; - swconfig,segment = "lan"; - swconfig,portmap = <1 3>; - }; - port@2 { - compatible = "swconfig,port"; - swconfig,segment = "lan"; - swconfig,portmap = <2 2>; - }; - port@3 { - compatible = "swconfig,port"; - swconfig,segment = "lan"; - swconfig,portmap = <3 1>; - }; - port@4 { - compatible = "swconfig,port"; - swconfig,segment = "wan"; - swconfig,portmap = <4 0>; - }; }; wmac@10180000 { _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
