Author: blogic Date: 2014-11-14 17:52:36 +0100 (Fri, 14 Nov 2014) New Revision: 43244
Added: trunk/target/linux/ramips/dts/WSR-1166.dts trunk/target/linux/ramips/dts/WSR-600.dts Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network trunk/target/linux/ramips/base-files/etc/diag.sh trunk/target/linux/ramips/base-files/lib/ramips.sh trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh trunk/target/linux/ramips/image/Makefile Log: ralink: add support for WSR-600/1166 Signed-off-by: John Crispin <[email protected]> Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network =================================================================== --- trunk/target/linux/ramips/base-files/etc/board.d/02_network 2014-11-14 16:52:30 UTC (rev 43243) +++ trunk/target/linux/ramips/base-files/etc/board.d/02_network 2014-11-14 16:52:36 UTC (rev 43244) @@ -121,13 +121,16 @@ mzk-750dhp | \ whr-300hp2 | \ whr-600d | \ + wsr-600 | \ + wsr-1166 | \ wt1520) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" ucidef_add_switch_vlan "switch0" "2" "4 6t" ;; - whr-1166d) + + whr-1166) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" Modified: trunk/target/linux/ramips/base-files/etc/diag.sh =================================================================== --- trunk/target/linux/ramips/base-files/etc/diag.sh 2014-11-14 16:52:30 UTC (rev 43243) +++ trunk/target/linux/ramips/base-files/etc/diag.sh 2014-11-14 16:52:36 UTC (rev 43244) @@ -170,6 +170,10 @@ wr8305rt) status_led="wr8305rt:sys" ;; + wsr-600 | \ + wsr-1166) + status_led="buffalo:orange:diag" + ;; wnce2001) status_led="netgear:green:power" ;; Modified: trunk/target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/ramips.sh 2014-11-14 16:52:30 UTC (rev 43243) +++ trunk/target/linux/ramips/base-files/lib/ramips.sh 2014-11-14 16:52:36 UTC (rev 43244) @@ -79,6 +79,12 @@ *"Aztech HW550-3G") name="hw550-3g" ;; + *"Buffalo WSR-600") + name="wsr-600" + ;; + *"Buffalo WSR-1166") + name="wsr-1166" + ;; *"CY-SWR1100") name="cy-swr1100" ;; Modified: trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2014-11-14 16:52:30 UTC (rev 43243) +++ trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2014-11-14 16:52:36 UTC (rev 43244) @@ -89,6 +89,8 @@ whr-g300n |\ whr-600d |\ whr-1166d |\ + wsr-600 |\ + wsr-1166 |\ wl-330n | \ wl-330n3g | \ wl-351 | \ Added: trunk/target/linux/ramips/dts/WSR-1166.dts =================================================================== --- trunk/target/linux/ramips/dts/WSR-1166.dts (rev 0) +++ trunk/target/linux/ramips/dts/WSR-1166.dts 2014-11-14 16:52:36 UTC (rev 43244) @@ -0,0 +1,149 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; + model = "Buffalo WSR-1166"; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x6b0000>; + }; + + partition@f700000 { + label = "usercfg"; + reg = <0x700000 0x100000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + internet_g { + label = "buffalo:green:internet"; + gpios = <&gpio1 9 1>; + }; + router_g { + label = "buffalo:green:router"; + gpios = <&gpio1 10 1>; + }; + router_o { + label = "buffalo:orange:router"; + gpios = <&gpio1 11 1>; + }; + internet_o { + label = "buffalo:orange:internet"; + gpios = <&gpio1 12 1>; + }; + wifi_o { + label = "buffalo:orange:wifi"; + gpios = <&gpio1 13 1>; + }; + power { + label = "buffalo:green:power"; + gpios = <&gpio0 14 1>; + }; + diag { + label = "buffalo:orange:diag"; + gpios = <&gpio1 15 1>; + }; + wifi_g { + label = "buffalo:green:wifi"; + gpios = <&gpio1 16 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + power { + label = "power"; + gpios = <&gpio0 18 1>; + linux,code = <0x74>; + }; + reset { + label = "reset"; + gpios = <&gpio0 3 1>; + linux,code = <0x198>; + }; + aoss { + label = "aoss"; + gpios = <&gpio0 6 1>; + linux,code = <0x211>; + }; + auto { + label = "mode"; + gpios = <&gpio0 7 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + ap { + label = "ap"; + gpios = <&gpio0 10 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + router { + label = "router"; + gpios = <&gpio0 12 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 0 1>; + }; +}; Added: trunk/target/linux/ramips/dts/WSR-600.dts =================================================================== --- trunk/target/linux/ramips/dts/WSR-600.dts (rev 0) +++ trunk/target/linux/ramips/dts/WSR-600.dts 2014-11-14 16:52:36 UTC (rev 43244) @@ -0,0 +1,148 @@ +/dts-v1/; + +/include/ "mt7621.dtsi" + +/ { + compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; + model = "Buffalo WSR-600"; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l12805d"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x6b0000>; + }; + + partition@f700000 { + label = "usercfg"; + reg = <0x700000 0x100000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "buffalo:green:power"; + gpios = <&gpio0 12 1>; + }; + wifi_o { + label = "buffalo:orange:wifi"; + gpios = <&gpio1 9 1>; + }; + diag { + label = "buffalo:orange:diag"; + gpios = <&gpio1 10 1>; + }; + wifi_g { + label = "buffalo:green:wifi"; + gpios = <&gpio1 12 1>; + }; + router_o { + label = "buffalo:orange:router"; + gpios = <&gpio1 13 1>; + }; + router_g { + label = "buffalo:green:router"; + gpios = <&gpio1 14 1>; + }; + internet_o { + label = "buffalo:orange:internet"; + gpios = <&gpio1 15 1>; + }; + internet_g { + label = "buffalo:green:internet"; + gpios = <&gpio1 16 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + power { + label = "power"; + gpios = <&gpio0 8 1>; + linux,code = <0x74>; + }; + reset { + label = "reset"; + gpios = <&gpio0 11 1>; + linux,code = <0x198>; + }; + aoss { + label = "aoss"; + gpios = <&gpio0 18 1>; + linux,code = <0x211>; + }; + auto { + label = "mode"; + gpios = <&gpio0 7 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + ap { + label = "ap"; + gpios = <&gpio0 6 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + router { + label = "router"; + gpios = <&gpio0 10 0>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ + }; + }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 11 1>; + }; +}; Modified: trunk/target/linux/ramips/image/Makefile =================================================================== --- trunk/target/linux/ramips/image/Makefile 2014-11-14 16:52:30 UTC (rev 43243) +++ trunk/target/linux/ramips/image/Makefile 2014-11-14 16:52:36 UTC (rev 43244) @@ -839,10 +839,14 @@ # Image/Build/Profile/MT7621=$(call BuildFirmware/Default4M/$(1),$(1),mt7621,MT7621) +Image/Build/Profile/WSR-600=$(call BuildFirmware/Default4M/$(1),$(1),wsr-600,WSR-600) +Image/Build/Profile/WSR-1166=$(call BuildFirmware/Default4M/$(1),$(1),wsr-1166,WSR-1166) ifeq ($(SUBTARGET),mt7621) define Image/Build/Profile/Default $(call Image/Build/Profile/MT7621,$(1)) + $(call Image/Build/Profile/WSR-600,$(1)) + $(call Image/Build/Profile/WSR-1166,$(1)) endef endif _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
