Author: blogic Date: 2015-03-15 20:39:41 +0100 (Sun, 15 Mar 2015) New Revision: 44794
Added: trunk/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch Modified: trunk/target/linux/ipq806x/config-3.18 Log: ipq806x: fix AP148 boot from NOR This patch allows AP148 to boot from NOR flash. As we're using a FIT image as kernel (which includes kernel bin + DTB) we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT image and automatically split the "firmware" partition into 2 MTD parts (kernel + rootfs). The rootfs will then be parsed and split between rootfs + rootfs_data, as usual. Signed-off-by: Mathieu Olivari <[email protected]> Modified: trunk/target/linux/ipq806x/config-3.18 =================================================================== --- trunk/target/linux/ipq806x/config-3.18 2015-03-15 19:39:33 UTC (rev 44793) +++ trunk/target/linux/ipq806x/config-3.18 2015-03-15 19:39:41 UTC (rev 44794) @@ -226,6 +226,9 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_SPLIT_SUPPORT=y CONFIG_MULTI_IRQ_HANDLER=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_NEED_DMA_MAP_STATE=y Added: trunk/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch =================================================================== --- trunk/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch (rev 0) +++ trunk/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch 2015-03-15 19:39:41 UTC (rev 44794) @@ -0,0 +1,35 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -78,13 +78,28 @@ + reg = <0>; + + partition@0 { +- label = "rootfs"; +- reg = <0x0 0x1000000>; ++ label = "lowlevel_init"; ++ reg = <0x0 0x1b0000>; + }; + + partition@1 { +- label = "scratch"; +- reg = <0x1000000 0x1000000>; ++ label = "u-boot"; ++ reg = <0x1b0000 0x80000>; ++ }; ++ ++ partition@2 { ++ label = "u-boot-env"; ++ reg = <0x230000 0x40000>; ++ }; ++ ++ partition@3 { ++ label = "caldata"; ++ reg = <0x270000 0x40000>; ++ }; ++ ++ partition@4 { ++ label = "firmware"; ++ reg = <0x2b0000 0x1d50000>; + }; + }; + }; _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
