Author: blogic Date: 2015-03-15 20:39:33 +0100 (Sun, 15 Mar 2015) New Revision: 44793
Added: trunk/target/linux/ipq806x/patches/ trunk/target/linux/ipq806x/patches/020-add-ap148-bootargs.patch Log: ipq806x: add ap148 bootargs to DT Only one bootargs is really needed: the tty port. All the other information will use the OpenWrt mechanisms. Signed-off-by: Mathieu Olivari <[email protected]> Added: trunk/target/linux/ipq806x/patches/020-add-ap148-bootargs.patch =================================================================== --- trunk/target/linux/ipq806x/patches/020-add-ap148-bootargs.patch (rev 0) +++ trunk/target/linux/ipq806x/patches/020-add-ap148-bootargs.patch 2015-03-15 19:39:33 UTC (rev 44793) @@ -0,0 +1,46 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts ++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +@@ -14,6 +14,14 @@ + }; + }; + ++ alias { ++ serial0 = &uart4; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -140,7 +140,7 @@ + ranges; + status = "disabled"; + +- serial@12490000 { ++ uart2: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; +@@ -175,7 +175,7 @@ + ranges; + status = "disabled"; + +- serial@16340000 { ++ uart4: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; +@@ -209,7 +209,7 @@ + ranges; + status = "disabled"; + +- serial@1a240000 { ++ uart5: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
