Author: jogo Date: 2015-03-25 16:35:12 +0100 (Wed, 25 Mar 2015) New Revision: 44985
Added: trunk/target/linux/brcm63xx/dts/homehub2a.dts trunk/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch Modified: trunk/target/linux/brcm63xx/base-files/etc/diag.sh trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network trunk/target/linux/brcm63xx/base-files/lib/brcm63xx.sh trunk/target/linux/brcm63xx/image/Makefile trunk/target/linux/brcm63xx/profiles/bt.mk Log: brcm63xx: Add BT Home Hub 2A support. Support for the BT HomeHub 2.0 Type A. This router was manufactured by Thomson, and it's BCM6358 based. The leds are controled by two chained HC594, all working ok. The BCM5325 switch has the RESET# pin wired to the GPIO15, but currently there is no way to tell the b53 driver how to get this gpio number in brcm63xx, therefore swconfig won't use it when performing a switch reset. The patch was tested with several firmwares, and all except unsupported stuff (i.e xDSL) works pretty well. Tested-by: Tahir <[email protected]> Signed-off-by: Daniel Gonzalez <[email protected]> Modified: trunk/target/linux/brcm63xx/base-files/etc/diag.sh =================================================================== --- trunk/target/linux/brcm63xx/base-files/etc/diag.sh 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/base-files/etc/diag.sh 2015-03-25 15:35:12 UTC (rev 44985) @@ -72,6 +72,10 @@ fast2704v2) status_led="F@ST2704V2:green:power" ;; + homehub2a) + status_led="HOMEHUB2A:green:upgrading" + status_led2="HOMEHUB2A:blue:upgrading" + ;; gw6200) status_led="GW6200:green:line1" status_led2="GW6200:green:tel" Modified: trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds =================================================================== --- trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds 2015-03-25 15:35:12 UTC (rev 44985) @@ -34,6 +34,12 @@ ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0" ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2" ;; +homehub2a) + ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1" + ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0" + ucidef_set_led_usbdev "usb1" "USB1" "HOMEHUB2A:blue:phone" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "HOMEHUB2A:green:phone" "2-1" + ;; esac ucidef_commit_leds Modified: trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network =================================================================== --- trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network 2015-03-25 15:35:12 UTC (rev 44985) @@ -66,7 +66,8 @@ dsl-274xb-c |\ hg553 |\ -hg556a_*) +hg556a_* |\ +homehub2a) ucidef_set_interface_lan "eth0.1" ucidef_add_switch "eth0" "1" "1" ucidef_add_switch_vlan "eth0" "1" "0 1 2 3 4 5t" Modified: trunk/target/linux/brcm63xx/base-files/lib/brcm63xx.sh =================================================================== --- trunk/target/linux/brcm63xx/base-files/lib/brcm63xx.sh 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/base-files/lib/brcm63xx.sh 2015-03-25 15:35:12 UTC (rev 44985) @@ -60,6 +60,9 @@ "Broadcom BCM96368MVWG reference board") board_name="bcm96368mvwg" ;; + "BT Home Hub 2.0 Type A") + board_name="homehub2a" + ;; "BT Voyager V2500V") board_name="v2500v" ;; Added: trunk/target/linux/brcm63xx/dts/homehub2a.dts =================================================================== --- trunk/target/linux/brcm63xx/dts/homehub2a.dts (rev 0) +++ trunk/target/linux/brcm63xx/dts/homehub2a.dts 2015-03-25 15:35:12 UTC (rev 44985) @@ -0,0 +1,140 @@ +/dts-v1/; + +/include/ "bcm6358.dtsi" + +/ { + model = "BT Home Hub 2.0 Type A"; + compatible = "thomson,homehub2a", "brcm,bcm6358"; + + spi-gpio { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-gpio"; + + gpio-mosi = <&gpio0 7 0>; + gpio-sck = <&gpio0 6 0>; + cs-gpios = <&gpio0 5 0>; + num-chipselects = <1>; + + hc595: gpio-spi-controller@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + phone { + label = "phone"; + gpios = <&gpio0 1 1>; + linux,code = <169>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 11 1>; + linux,code = <0x211>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_red { + label = "HOMEHUB2A:red:power"; + gpios = <&hc595 0 1>; + }; + power_green { + label = "HOMEHUB2A:green:power"; + gpios = <&hc595 1 1>; + default-state = "on"; + }; + power_blue { + label = "HOMEHUB2A:blue:power"; + gpios = <&hc595 2 1>; + }; + broadband_red { + label = "HOMEHUB2A:red:broadband"; + gpios = <&hc595 3 1>; + }; + broadband_green { + label = "HOMEHUB2A:green:broadband"; + gpios = <&hc595 4 1>; + }; + broadband_blue { + label = "HOMEHUB2A:blue:broadband"; + gpios = <&hc595 5 1>; + }; + wireless_red { + label = "HOMEHUB2A:red:wireless"; + gpios = <&hc595 6 1>; + }; + wireless_green { + label = "HOMEHUB2A:green:wireless"; + gpios = <&hc595 7 1>; + }; + wireless_blue { + label = "HOMEHUB2A:blue:wireless"; + gpios = <&hc595 8 1>; + }; + phone_red { + label = "HOMEHUB2A:red:phone"; + gpios = <&hc595 9 1>; + }; + phone_green { + label = "HOMEHUB2A:green:phone"; + gpios = <&hc595 10 1>; + }; + phone_blue { + label = "HOMEHUB2A:blue:phone"; + gpios = <&hc595 11 1>; + }; + upgrading_red { + label = "HOMEHUB2A:red:upgrading"; + gpios = <&hc595 12 1>; + }; + upgrading_green { + label = "HOMEHUB2A:green:upgrading"; + gpios = <&hc595 13 1>; + }; + upgrading_blue { + label = "HOMEHUB2A:blue:upgrading"; + gpios = <&hc595 14 1>; + }; + }; +}; + +&pflash { + status = "ok"; + + linux,part-probe = "bcm63xxpart"; + + cfe@0 { + label = "CFE"; + reg = <0x000000 0x020000>; + }; + + linux@20000 { + label = "linux"; + reg = <0x020000 0xfc0000>; + }; + + nvram@fe0000 { + label = "nvram"; + reg = <0xfe0000 0x020000>; + }; +}; Modified: trunk/target/linux/brcm63xx/image/Makefile =================================================================== --- trunk/target/linux/brcm63xx/image/Makefile 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/image/Makefile 2015-03-25 15:35:12 UTC (rev 44985) @@ -275,6 +275,8 @@ $(eval $(call ImageDTB,CFEDTB,AR1004G,AR1004G,ar1004g,96348GW-10,6348)) # Belkin F5D7633 $(eval $(call ImageDTB,CFEDTB,F5D7633,F5D7633,f5d7633,96348GW-10,6348,--block-size 0x20000 --image-offset 0x20000)) +# BT Home Hub 2.0 A +$(eval $(call ImageDTB,CFEDTB,BTHOMEHUB2A,HomeHub2A,homehub2a,HOMEHUB2A,6358,--image-offset 0x20000 --block-size 0x20000)) # BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA $(eval $(call ImageDTB,CFEDTB,BTV2500V,BTV2500V,v2500v-bb,V2500V_BB,6348,--layoutver 5)) # Comtrend AR-5381u Added: trunk/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch =================================================================== --- trunk/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch (rev 0) +++ trunk/target/linux/brcm63xx/patches-3.18/569-board_homehub2a.patch 2015-03-25 15:35:12 UTC (rev 44985) @@ -0,0 +1,51 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1748,6 +1748,32 @@ + }, + }; + ++static struct board_info __initdata board_homehub2a = { ++ .name = "HOMEHUB2A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .use_fallback_sprom = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ + static struct board_info __initdata board_HW520 = { + .name = "HW6358GW_B", + .expected_cpu_id = 0x6358, +@@ -2748,6 +2774,7 @@ + &board_nb4_ser_r0, + &board_nb4_fxc_r1, + &board_ct6373_1, ++ &board_homehub2a, + &board_HW520, + &board_HW553, + &board_HW556_A, +@@ -2845,6 +2872,7 @@ + { .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, }, + { .compatible = "t-com,spw303v", .data = &board_spw303v, }, + { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, ++ { .compatible = "thomson,homehub2a", .data = &board_homehub2a, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_6362 + { .compatible = "sagem,f@st2504n", .data = &board_fast2504n, }, Modified: trunk/target/linux/brcm63xx/profiles/bt.mk =================================================================== --- trunk/target/linux/brcm63xx/profiles/bt.mk 2015-03-25 15:34:59 UTC (rev 44984) +++ trunk/target/linux/brcm63xx/profiles/bt.mk 2015-03-25 15:35:12 UTC (rev 44985) @@ -5,6 +5,16 @@ # See /LICENSE for more information. # +define Profile/BTHOMEHUB2A + NAME:=BT Home Hub 2A + PACKAGES:=kmod-b43 wpad-mini \ + kmod-usb2 kmod-usb-ohci kmod-ledtrig-usbdev +endef +define Profile/BTHOMEHUB2A/Description + Package set optimized for BTHOMEHUB2A. +endef +$(eval $(call Profile,BTHOMEHUB2A)) + define Profile/BTV2500V NAME:=BT Voyager V2500V PACKAGES:=kmod-b43 wpad-mini _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
