Author: blogic Date: 2015-04-09 12:32:37 +0200 (Thu, 09 Apr 2015) New Revision: 45331
Added: trunk/target/linux/ramips/dts/MicroWRT.dts trunk/target/linux/ramips/mt7620/profiles/microwrt.mk Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network trunk/target/linux/ramips/base-files/lib/ramips.sh trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh trunk/target/linux/ramips/image/Makefile Log: ramips: Add support for Microduino MicroWRT MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: ?\231?\155?\155?\229?\135?\175 <[email protected]> Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network =================================================================== --- trunk/target/linux/ramips/base-files/etc/board.d/02_network 2015-04-09 10:32:26 UTC (rev 45330) +++ trunk/target/linux/ramips/base-files/etc/board.d/02_network 2015-04-09 10:32:37 UTC (rev 45331) @@ -45,6 +45,7 @@ 3g150b | \ 3g300m | \ + microwrt | \ w150m | \ zte-q7 | \ all0256n | \ Modified: trunk/target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/ramips.sh 2015-04-09 10:32:26 UTC (rev 45330) +++ trunk/target/linux/ramips/base-files/lib/ramips.sh 2015-04-09 10:32:37 UTC (rev 45331) @@ -202,6 +202,9 @@ *"Planex MZK-750DHP") name="mzk-750dhp" ;; + *"Microduino MicroWRT") + name="microwrt" + ;; *"NBG-419N") name="nbg-419n" ;; Modified: trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-04-09 10:32:26 UTC (rev 45330) +++ trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-04-09 10:32:37 UTC (rev 45331) @@ -60,6 +60,7 @@ m2m | \ m3 | \ m4 | \ + microwrt | \ mlw221 | \ mlwg2 | \ mofi3500-3gn | \ Copied: trunk/target/linux/ramips/dts/MicroWRT.dts (from rev 45330, trunk/target/linux/ramips/dts/AIBR100.dts) =================================================================== --- trunk/target/linux/ramips/dts/MicroWRT.dts (rev 0) +++ trunk/target/linux/ramips/dts/MicroWRT.dts 2015-04-09 10:32:37 UTC (rev 45331) @@ -0,0 +1,107 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "microwrt", "ralink,mt7620a-soc"; + model = "Microduino MicroWRT"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "u-boot-env"; + reg = <0x20000 0x10000>; + read-only; + }; + + factory: partition@30000 { + label = "factory"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0xfc0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "wled", "i2c", "wdt", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 2 1>; + linux,code = <0x211>; + }; + }; + }; Modified: trunk/target/linux/ramips/image/Makefile =================================================================== --- trunk/target/linux/ramips/image/Makefile 2015-04-09 10:32:26 UTC (rev 45330) +++ trunk/target/linux/ramips/image/Makefile 2015-04-09 10:32:37 UTC (rev 45331) @@ -865,6 +865,8 @@ Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) +microwrt_mtd_size=16515072 +Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size)) ifeq ($(SUBTARGET),mt7620) @@ -895,6 +897,7 @@ $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) + $(call Image/Build/Profile/MicroWRT,$(1)) endef endif Added: trunk/target/linux/ramips/mt7620/profiles/microwrt.mk =================================================================== --- trunk/target/linux/ramips/mt7620/profiles/microwrt.mk (rev 0) +++ trunk/target/linux/ramips/mt7620/profiles/microwrt.mk 2015-04-09 10:32:37 UTC (rev 45331) @@ -0,0 +1,9 @@ +define Profile/MicroWRT + NAME:=Microduino MicroWRT + PACKAGES:= kmod-usb-core kmod-usb2 kmod-usb-ohci +endef + +define Profile/MicroWRT/Description + Package set compatible with MicroWRT +endef +$(eval $(call Profile,MicroWRT)) _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
