Author: nbd Date: 2015-05-08 14:24:11 +0200 (Fri, 08 May 2015) New Revision: 45637
Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c Log: ar71xx: add support for green LAN LEDS for wnr2000-v4 Signed-off-by: Michael J. Bazzinotti <[email protected]> Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c =================================================================== --- trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c 2015-05-08 12:24:03 UTC (rev 45636) +++ trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c 2015-05-08 12:24:11 UTC (rev 45637) @@ -33,10 +33,14 @@ #define WNR2000V4_GPIO_LED_WAN_GREEN 17 #define WNR2000V4_GPIO_LED_WPS 2 #define WNR2000V4_GPIO_LED_WLAN 12 -#define WNR2000V4_GPIO_LED_LAN1 18 -#define WNR2000V4_GPIO_LED_LAN2 19 -#define WNR2000V4_GPIO_LED_LAN3 20 -#define WNR2000V4_GPIO_LED_LAN4 21 +#define WNR2000V4_GPIO_LED_LAN1_GREEN 13 +#define WNR2000V4_GPIO_LED_LAN2_GREEN 14 +#define WNR2000V4_GPIO_LED_LAN3_GREEN 15 +#define WNR2000V4_GPIO_LED_LAN4_GREEN 16 +#define WNR2000V4_GPIO_LED_LAN1_AMBER 18 +#define WNR2000V4_GPIO_LED_LAN2_AMBER 19 +#define WNR2000V4_GPIO_LED_LAN3_AMBER 20 +#define WNR2000V4_GPIO_LED_LAN4_AMBER 21 #define STATUS_LED_GPIO 1 #define WNR2000V4_GPIO_LED_PWR_GREEN 0 @@ -76,21 +80,39 @@ .gpio = WNR2000V4_GPIO_LED_WLAN, .active_low = 1, }, + /* LAN LEDS */ { + .name = "netgear:green:lan1", + .gpio = WNR2000V4_GPIO_LED_LAN1_GREEN, + .active_low = 1, + }, { + .name = "netgear:green:lan2", + .gpio = WNR2000V4_GPIO_LED_LAN2_GREEN, + .active_low = 1, + }, { + .name = "netgear:green:lan3", + .gpio = WNR2000V4_GPIO_LED_LAN3_GREEN, + .active_low = 1, + }, { + .name = "netgear:green:lan4", + .gpio = WNR2000V4_GPIO_LED_LAN4_GREEN, + .active_low = 1, + }, + { .name = "netgear:amber:lan1", - .gpio = WNR2000V4_GPIO_LED_LAN1, + .gpio = WNR2000V4_GPIO_LED_LAN1_AMBER, .active_low = 1, }, { .name = "netgear:amber:lan2", - .gpio = WNR2000V4_GPIO_LED_LAN2, + .gpio = WNR2000V4_GPIO_LED_LAN2_AMBER, .active_low = 1, }, { .name = "netgear:amber:lan3", - .gpio = WNR2000V4_GPIO_LED_LAN3, + .gpio = WNR2000V4_GPIO_LED_LAN3_AMBER, .active_low = 1, }, { .name = "netgear:amber:lan4", - .gpio = WNR2000V4_GPIO_LED_LAN4, + .gpio = WNR2000V4_GPIO_LED_LAN4_AMBER, .active_low = 1, } }; @@ -155,8 +177,18 @@ static void __init wnr2000v4_setup(void) { + int i; + wnr_common_setup(); + /* Ensure no LED has an internal MUX signal, otherwise + control of LED could be lost... This is especially important + for most green LEDS (Eth,WAN).. who arrive in this function with + MUX signals set. */ + for (i = 0; i < ARRAY_SIZE(wnr2000v4_leds_gpio); i++) + ath79_gpio_output_select(wnr2000v4_leds_gpio[i].gpio, + AR934X_GPIO_OUT_GPIO); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio), wnr2000v4_leds_gpio); _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
