Author: blogic Date: 2015-09-15 08:13:07 +0200 (Tue, 15 Sep 2015) New Revision: 46939
Modified: trunk/target/linux/lantiq/base-files/lib/upgrade/platform.sh Log: lantiq: add platform_pre_upgrade for sysupgrade As explained in recent sysupgrade/nand.sh commits, current NAND sysupgrade is a bit misleading because of nand_do_platform_check behavior. It leaves a special mark in /tmp/sysupgrade-nand-path triggering some diffent code path in nand_upgrade_stage1. The plan is to have the check function only check the image and nothing else. Then platform code (platform_pre_upgrade) should trigger NAND specific upgrade path. This is what this patch implements. Please note that because of current nand_upgrade_stage1 implementation this patch doesn't change any behaior yet. It only prepares lantiq target for changing nand_do_platform_check (it will be possible after preparing all other targets as well). Signed-off-by: Rafa?\197?\130 Mi?\197?\130ecki <[email protected]> Modified: trunk/target/linux/lantiq/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/lantiq/base-files/lib/upgrade/platform.sh 2015-09-15 06:12:55 UTC (rev 46938) +++ trunk/target/linux/lantiq/base-files/lib/upgrade/platform.sh 2015-09-15 06:13:07 UTC (rev 46939) @@ -25,6 +25,16 @@ esac } +platform_pre_upgrade() { + local board=$(lantiq_board_name) + + case "$board" in + BTHOMEHUBV2B|BTHOMEHUBV3A|P2812HNUF* ) + nand_do_upgrade $1 + ;; + esac +} + # use default for platform_do_upgrade() disable_watchdog() { _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
