Author: rmilecki Date: 2015-09-27 00:57:33 +0200 (Sun, 27 Sep 2015) New Revision: 47052
Added: trunk/target/linux/bcm53xx/patches-4.1/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch Modified: trunk/target/linux/bcm53xx/image/Makefile trunk/target/linux/bcm53xx/patches-4.1/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch Log: bcm53xx: add early support for Linksys EA6300 V1 Signed-off-by: Rafa?\197?\130 Mi?\197?\130ecki <[email protected]> Modified: trunk/target/linux/bcm53xx/image/Makefile =================================================================== --- trunk/target/linux/bcm53xx/image/Makefile 2015-09-26 21:11:16 UTC (rev 47051) +++ trunk/target/linux/bcm53xx/image/Makefile 2015-09-26 22:57:33 UTC (rev 47052) @@ -87,6 +87,18 @@ TARGET_DEVICES += asus-$(1) endef +define Device/linksys + IMAGES := trx + IMAGE/trx := trx-nand +endef + +define LinksysDevice + define Device/linksys-$(1) + $$(Device/linksys) + endef + TARGET_DEVICES += linksys-$(1) +endef + define Device/netgear IMAGES := chk IMAGE/chk := trx-nand | netgear-chk @@ -131,6 +143,7 @@ $(eval $(call AsusDevice,rt-ac68u,RT-AC68U)) $(eval $(call AsusDevice,rt-ac87u,RT-AC87U)) $(eval $(call AsusDevice,rt-n18u,RT-N18U)) +$(eval $(call LinksysDevice,ea6300-v1)) $(eval $(call NetgearDevice,r7000,U12H270T00_NETGEAR)) $(eval $(call BuildImage)) Added: trunk/target/linux/bcm53xx/patches-4.1/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch =================================================================== --- trunk/target/linux/bcm53xx/patches-4.1/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch (rev 0) +++ trunk/target/linux/bcm53xx/patches-4.1/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch 2015-09-26 22:57:33 UTC (rev 47052) @@ -0,0 +1,72 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]> +Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki <[email protected]> +--- +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ + bcm4708-buffalo-wzr-1750dhp.dtb \ ++ bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-luxul-xwc-1000.dtb \ + bcm4708-netgear-r6250.dtb \ + bcm4708-netgear-r6300-v2.dtb \ +diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +new file mode 100644 +index 0000000..705d0c2 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +@@ -0,0 +1,48 @@ ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for Linksys EA6300 V1 ++ * ++ * Copyright (C) 2015 Rafał Miłecki <[email protected]> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++ ++/ { ++ compatible = "linksys,ea6300v1", "brcm,bcm4708"; ++ model = "Linksys EA6300 V1"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; Modified: trunk/target/linux/bcm53xx/patches-4.1/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch =================================================================== --- trunk/target/linux/bcm53xx/patches-4.1/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch 2015-09-26 21:11:16 UTC (rev 47051) +++ trunk/target/linux/bcm53xx/patches-4.1/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch 2015-09-26 22:57:33 UTC (rev 47052) @@ -157,3 +157,14 @@ }; memory { +--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +@@ -17,7 +17,7 @@ + model = "Linksys EA6300 V1"; + + chosen { +- bootargs = "console=ttyS0,115200"; ++ bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
