Author: blogic Date: 2015-10-01 16:16:40 +0200 (Thu, 01 Oct 2015) New Revision: 47072
Added: branches/chaos_calmer/target/linux/ramips/dts/WIZFI630A.dts branches/chaos_calmer/target/linux/ramips/rt305x/profiles/wiznet.mk Modified: branches/chaos_calmer/target/linux/ramips/base-files/etc/board.d/02_network branches/chaos_calmer/target/linux/ramips/base-files/etc/diag.sh branches/chaos_calmer/target/linux/ramips/base-files/lib/upgrade/platform.sh branches/chaos_calmer/target/linux/ramips/image/Makefile Log: CC: ramips: Added WIZnet WizFi630A Platfrom based on Ralink RT5350 This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor. Signed-off-by: Tobias Welz <[email protected]> This is a backport of patch r46921 Modified: branches/chaos_calmer/target/linux/ramips/base-files/etc/board.d/02_network =================================================================== --- branches/chaos_calmer/target/linux/ramips/base-files/etc/board.d/02_network 2015-10-01 14:16:37 UTC (rev 47071) +++ branches/chaos_calmer/target/linux/ramips/base-files/etc/board.d/02_network 2015-10-01 14:16:40 UTC (rev 47072) @@ -156,7 +156,12 @@ ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t" ucidef_add_switch_vlan "switch0" "2" "5 6t" ;; - + wizfi630a) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 6t" + ucidef_add_switch_vlan "switch0" "2" "0 6t" + ;; awm002-evb | \ awm003-evb | \ argus-atp52b | \ @@ -363,6 +368,10 @@ wan_mac=$(mtd_get_mac_binary factory 4) lan_mac=$wan_mac ;; + wizfi630a) + lan_mac=$(mtd_get_mac_binary factory 4) + wan_mac=$(mtd_get_mac_binary factory 40) + ;; wsr-1166) local index="$(find_mtd_index "board_data")" wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" Modified: branches/chaos_calmer/target/linux/ramips/base-files/etc/diag.sh =================================================================== --- branches/chaos_calmer/target/linux/ramips/base-files/etc/diag.sh 2015-10-01 14:16:37 UTC (rev 47071) +++ branches/chaos_calmer/target/linux/ramips/base-files/etc/diag.sh 2015-10-01 14:16:40 UTC (rev 47072) @@ -175,6 +175,9 @@ whr-g300n) status_led="whr-g300n:green:router" ;; + wizfi630a) + status_led="wizfi630a::run" + ;; wmr300) status_led="buffalo:green:status" ;; Modified: branches/chaos_calmer/target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- branches/chaos_calmer/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-10-01 14:16:37 UTC (rev 47071) +++ branches/chaos_calmer/target/linux/ramips/base-files/lib/upgrade/platform.sh 2015-10-01 14:16:40 UTC (rev 47072) @@ -103,6 +103,7 @@ whr-300hp2 |\ whr-600d |\ whr-1166d |\ + wizfi630a |\ wsr-600 |\ wl-330n | \ wl-330n3g | \ Added: branches/chaos_calmer/target/linux/ramips/dts/WIZFI630A.dts =================================================================== --- branches/chaos_calmer/target/linux/ramips/dts/WIZFI630A.dts (rev 0) +++ branches/chaos_calmer/target/linux/ramips/dts/WIZFI630A.dts 2015-10-01 14:16:40 UTC (rev 47072) @@ -0,0 +1,180 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "wizfi630a", "ralink,rt5350-soc"; + model = "WIZnet WizFi630A"; + + chosen { + bootargs = "console=ttyS1,115200"; + }; + + palmbus@10000000 { + gpio1: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + + uart@500 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0x500 0x100>; + resets = <&rstctrl 12>; + reset-names = "uart"; + interrupt-parent = <&intc>; + interrupts = <5>; + reg-shift = <2>; + status = "okay"; + }; + + uartlite@c00 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + resets = <&rstctrl 19>; + reset-names = "uartl"; + interrupt-parent = <&intc>; + interrupts = <12>; + reg-shift = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uartlite_pins>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag" ; + ralink,function = "gpio"; + }; + }; + + uartf_gpio_pins: uartf_gpio { + uartf_gpio { + ralink,group = "uartf"; + ralink,function = "uartf"; + }; + }; + + uartlite_pins: uartlite { + uart { + ralink,group = "uartlite"; + ralink,function = "uartlite"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x17>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + run { + label = "wizfi630a::run"; + gpios = <&gpio0 1 1>; + }; + + wps { + label = "wizfi630a::wps"; + gpios = <&gpio0 20 1>; + }; + + uart1 { + label = "wizfi630a::uart1"; + gpios = <&gpio0 18 1>; + }; + + uart2 { + label = "wizfi630a::uart2"; + gpios = <&gpio0 21 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 17 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + + scm1 { + label = "SCM1"; + gpios = <&gpio0 19 1>; + linux,code = <0x100>; + }; + + scm2 { + label = "SCM2"; + gpios = <&gpio0 2 1>; + linux,code = <0x101>; + }; + }; +}; Modified: branches/chaos_calmer/target/linux/ramips/image/Makefile =================================================================== --- branches/chaos_calmer/target/linux/ramips/image/Makefile 2015-10-01 14:16:37 UTC (rev 47071) +++ branches/chaos_calmer/target/linux/ramips/image/Makefile 2015-10-01 14:16:40 UTC (rev 47072) @@ -627,6 +627,8 @@ BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N) Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1)) +Image/Build/Profile/WIZFI630A=$(call BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A) + Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image) Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N) @@ -761,6 +763,7 @@ $(call Image/Build/Profile/WCR150GN,$(1)) $(call Image/Build/Profile/WHRG300N,$(1)) $(call Image/Build/Profile/WIZARD8800,$(1)) + $(call Image/Build/Profile/WIZFI630A,$(1)) $(call Image/Build/Profile/WL_330N,$(1)) $(call Image/Build/Profile/WL_330N3G,$(1)) $(call Image/Build/Profile/WL341V3,$(1)) Added: branches/chaos_calmer/target/linux/ramips/rt305x/profiles/wiznet.mk =================================================================== --- branches/chaos_calmer/target/linux/ramips/rt305x/profiles/wiznet.mk (rev 0) +++ branches/chaos_calmer/target/linux/ramips/rt305x/profiles/wiznet.mk 2015-10-01 14:16:40 UTC (rev 47072) @@ -0,0 +1,17 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WIZFI630A + NAME:=WIZnet WizFi630A + PACKAGES:=\ + kmod-usb2 +endef + +define Profile/WIZFI630A/Description + Package set for WIZnet WizFi630A board +endef +$(eval $(call Profile,WIZFI630A)) _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
