Author: blogic Date: 2015-10-15 16:38:00 +0200 (Thu, 15 Oct 2015) New Revision: 47192
Added: branches/chaos_calmer/target/linux/mcs814x/patches-3.18/014-debuguart.patch Modified: branches/chaos_calmer/target/linux/mcs814x/config-3.18 Log: mcs814x: fix debug UART Switch to new 8250 debug uart code because the old mach-mcs814x/include/mach/debug-macro.S tries to include asm/hardware/debug-8250.S which no longer exists since kernel 3.14 Signed-off-by: G?\195?\188nther Kelleter <[email protected]> Backport of r46646 Modified: branches/chaos_calmer/target/linux/mcs814x/config-3.18 =================================================================== --- branches/chaos_calmer/target/linux/mcs814x/config-3.18 2015-10-15 14:37:38 UTC (rev 47191) +++ branches/chaos_calmer/target/linux/mcs814x/config-3.18 2015-10-15 14:38:00 UTC (rev 47192) @@ -49,10 +49,15 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" CONFIG_DEBUG_LL_UART_NONE=y -# CONFIG_DEBUG_UART_8250 is not set +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0x400dc000 # CONFIG_DEBUG_UART_PL01X is not set +CONFIG_DEBUG_UART_VIRT=0xf00dc000 # CONFIG_DEBUG_USER is not set CONFIG_DTC=y CONFIG_EARLY_PRINTK=y @@ -157,7 +162,6 @@ CONFIG_MULTI_IRQ_HANDLER=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_MACH_MEMORY_H=y CONFIG_NEED_PER_CPU_KM=y CONFIG_NET_KEY=y # CONFIG_NET_VENDOR_BROADCOM is not set Added: branches/chaos_calmer/target/linux/mcs814x/patches-3.18/014-debuguart.patch =================================================================== --- branches/chaos_calmer/target/linux/mcs814x/patches-3.18/014-debuguart.patch (rev 0) +++ branches/chaos_calmer/target/linux/mcs814x/patches-3.18/014-debuguart.patch 2015-10-15 14:38:00 UTC (rev 47192) @@ -0,0 +1,41 @@ +--- a/arch/arm/mach-mcs814x/include/mach/debug-macro.S ++++ /dev/null +@@ -1,11 +0,0 @@ +-#include <mach/mcs814x.h> +- +- .macro addruart, rp, rv, tmp +- ldr \rp, =MCS814X_PHYS_BASE +- ldr \rv, =MCS814X_VIRT_BASE +- orr \rp, \rp, #MCS814X_UART +- orr \rv, \rv, #MCS814X_UART +- .endm +- +-#define UART_SHIFT 2 +-#include <asm/hardware/debug-8250.S> +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -1089,7 +1089,7 @@ config DEBUG_UART_8250 + (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ + ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ + ARCH_IOP33X || ARCH_IXP4XX || \ +- ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC ++ ARCH_LPC32XX || ARCH_MCS814X || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC + + # Compatibility options for BCM63xx + config DEBUG_UART_BCM63XX +@@ -1124,6 +1124,7 @@ config DEBUG_UART_PHYS + default 0x3e000000 if DEBUG_BCM_KONA_UART + default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40090000 if ARCH_LPC32XX ++ default 0x400dc000 if ARCH_MCS814X + default 0x40100000 if DEBUG_PXA_UART1 + default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ +@@ -1178,6 +1179,7 @@ config DEBUG_UART_VIRT + default 0xe0010fe0 if ARCH_RPC + default 0xe1000000 if DEBUG_MSM_UART + default 0xf0000be0 if ARCH_EBSA110 ++ default 0xf00dc000 if ARCH_MCS814X + default 0xf01fb000 if DEBUG_NOMADIK_UART + default 0xf0201000 if DEBUG_BCM2835 + default 0xf1000300 if DEBUG_BCM_5301X _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
