Author: blogic Date: 2015-10-19 20:18:12 +0200 (Mon, 19 Oct 2015) New Revision: 47236
Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c Log: ar71xx: Send power to USB port on WNR2200 This patch fixes ticket #15267 by enabling power on the WNR2200's USB port. At present, the USB port on the WNR2200 is non-functional due to it not receiving power. This patch defines an additional GPIO pin, but none of the current GPIO definitions have been modified. Signed-off-by: Riley Baird <[email protected]> Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c =================================================================== --- trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c 2015-10-19 17:58:05 UTC (rev 47235) +++ trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c 2015-10-19 18:18:12 UTC (rev 47236) @@ -36,7 +36,7 @@ #define WNR2200_GPIO_LED_LAN4_GREEN 16 #define WNR2200_GPIO_LED_PWR_AMBER 21 #define WNR2200_GPIO_LED_PWR_GREEN 22 - +#define WNR2200_GPIO_USB_5V 4 #define WNR2200_GPIO_USB_POWER 24 #define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */ @@ -127,9 +127,9 @@ wnr2200_leds_gpio); /* enable power for the USB port */ - gpio_request_one(WNR2200_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); + ap9x_pci_setup_wmac_gpio(0, + BIT(WNR2200_GPIO_USB_5V), + BIT(WNR2200_GPIO_USB_5V)); ath79_register_usb(); } _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
