Author: blogic Date: 2015-12-17 10:26:28 +0100 (Thu, 17 Dec 2015) New Revision: 47903
Added: trunk/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch Log: ramips: mt7621: add patch to setup CM memory region for palmbus This is tested and works on ubnt-erx. Signed-off-by: Nikolay Martynov <[email protected]> Added: trunk/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch =================================================================== --- trunk/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch (rev 0) +++ trunk/target/linux/ramips/patches-4.3/0060-mt7621-set-up-palmbus-memory-region.patch 2015-12-17 09:26:28 UTC (rev 47903) @@ -0,0 +1,36 @@ +--- a/arch/mips/include/asm/mach-ralink/mt7621.h ++++ b/arch/mips/include/asm/mach-ralink/mt7621.h +@@ -13,6 +13,9 @@ + #ifndef _MT7621_REGS_H_ + #define _MT7621_REGS_H_ + ++#define MT7621_PALMBUS_BASE 0x1C000000 ++#define MT7621_PALMBUS_SIZE 0x03FFFFFF ++ + #define MT7621_SYSC_BASE 0x1E000000 + + #define SYSC_REG_CHIP_NAME0 0x00 +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -204,6 +204,21 @@ void prom_soc_init(struct ralink_soc_inf + mips_cm_probe(); + mips_cpc_probe(); + ++ if (mips_cm_numiocu()) { ++ /* mips_cm_probe() wipes out bootloader ++ config for CM regions and we have to configure them ++ again. This SoC cannot talk to pamlbus devices ++ witout proper iocu region set up. ++ ++ FIXME: it would be better to do this with values ++ from DT, but we need this very early because ++ without this we cannot talk to pretty much anything ++ including serial. ++ */ ++ write_gcr_reg0_base(MT7621_PALMBUS_BASE); ++ write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE | CM_GCR_REGn_MASK_CMTGT_IOCU0); ++ } ++ + if (!register_cps_smp_ops()) + return; + if (!register_cmp_smp_ops()) _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
