Author: luka Date: 2015-12-28 05:55:48 +0100 (Mon, 28 Dec 2015) New Revision: 48009
Added: trunk/target/linux/imx6/patches-4.3/041-ARM-dts-imx-ventana-add-spi-support-for-gw52xx.patch Log: imx6: ventana: add ecspi3 host controller for GW52xx Certain board revisions of the GW52xx support an SPI host controller with a single chip-select going to an off board connector. Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Pushpal Sidhu <[email protected]> Added: trunk/target/linux/imx6/patches-4.3/041-ARM-dts-imx-ventana-add-spi-support-for-gw52xx.patch =================================================================== --- trunk/target/linux/imx6/patches-4.3/041-ARM-dts-imx-ventana-add-spi-support-for-gw52xx.patch (rev 0) +++ trunk/target/linux/imx6/patches-4.3/041-ARM-dts-imx-ventana-add-spi-support-for-gw52xx.patch 2015-12-28 04:55:48 UTC (rev 48009) @@ -0,0 +1,35 @@ +Index: linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +=================================================================== +--- linux-4.3.orig/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi 2015-12-18 10:39:44.899158318 -0800 ++++ linux-4.3/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi 2015-12-18 10:43:27.000000000 -0800 +@@ -158,6 +158,14 @@ + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + }; + ++&ecspi3 { ++ fsl,spi-num-chipselects = <1>; ++ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_ecspi3>; ++ status = "okay"; ++}; ++ + &fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; +@@ -357,6 +365,15 @@ + >; + }; + ++ pinctrl_ecspi3: escpi3grp { ++ fsl,pins = < ++ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 ++ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 ++ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 ++ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 ++ >; ++ }; ++ + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
