Author: blogic Date: 2016-01-01 22:19:50 +0100 (Fri, 01 Jan 2016) New Revision: 48049
Added: trunk/target/linux/ramips/dts/WRTNODE2.dtsi trunk/target/linux/ramips/dts/WRTNODE2P.dts trunk/target/linux/ramips/dts/WRTNODE2R.dts Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network trunk/target/linux/ramips/base-files/etc/diag.sh trunk/target/linux/ramips/base-files/lib/ramips.sh trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh trunk/target/linux/ramips/image/Makefile Log: ralink: add WRTnode2 platform and led support Signed-off-by: xzmu <[email protected]> Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network =================================================================== --- trunk/target/linux/ramips/base-files/etc/board.d/02_network 2016-01-01 21:19:41 UTC (rev 48048) +++ trunk/target/linux/ramips/base-files/etc/board.d/02_network 2016-01-01 21:19:50 UTC (rev 48049) @@ -117,6 +117,8 @@ ubnt-erx|\ ur-326n4g|\ wrtnode|\ + wrtnode2p | \ + wrtnode2r | \ wt3020|\ zbt-wa05) ucidef_add_switch "switch0" \ Modified: trunk/target/linux/ramips/base-files/etc/diag.sh =================================================================== --- trunk/target/linux/ramips/base-files/etc/diag.sh 2016-01-01 21:19:41 UTC (rev 48048) +++ trunk/target/linux/ramips/base-files/etc/diag.sh 2016-01-01 21:19:50 UTC (rev 48049) @@ -181,6 +181,11 @@ wsr-600) status_led="$board:orange:diag" ;; + wrtnode2r | \ + wrtnode2p | \ + wrtnode) + status_led="wrtnode:blue:indicator" + ;; esac } Modified: trunk/target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/ramips.sh 2016-01-01 21:19:41 UTC (rev 48048) +++ trunk/target/linux/ramips/base-files/lib/ramips.sh 2016-01-01 21:19:50 UTC (rev 48049) @@ -433,6 +433,12 @@ *"WRTNODE") name="wrtnode" ;; + *"WRTnode2R") + name="wrtnode2r" + ;; + *"WRTnode2P") + name="wrtnode2p" + ;; *"WSR-1166DHP") name="wsr-1166" ;; Modified: trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2016-01-01 21:19:41 UTC (rev 48048) +++ trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2016-01-01 21:19:50 UTC (rev 48049) @@ -125,6 +125,8 @@ wr512-3gn|\ wr6202|\ wrtnode|\ + wrtnode2r |\ + wrtnode2p |\ wsr-600|\ wt1520|\ wt3020|\ Copied: trunk/target/linux/ramips/dts/WRTNODE2.dtsi (from rev 48048, trunk/target/linux/ramips/dts/M4-4M.dts) =================================================================== --- trunk/target/linux/ramips/dts/WRTNODE2.dtsi (rev 0) +++ trunk/target/linux/ramips/dts/WRTNODE2.dtsi 2016-01-01 21:19:50 UTC (rev 48049) @@ -0,0 +1,95 @@ +/dts-v1/; + +/include/ "mt7628an.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + + + spidev@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spidev"; + reg = <1 0>; + linux,modalias = "spidev", "spidev"; + spi-max-frequency = <10000000>; + }; + }; + + uart1@d00 { + status = "okay"; + }; + + i2c@900 { + status = "okay"; + }; + + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + pcie@10140000 { + status = "okay"; + }; + + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 5 1>; + linux,code = <0x198>; + }; + }; + +}; + Added: trunk/target/linux/ramips/dts/WRTNODE2P.dts =================================================================== --- trunk/target/linux/ramips/dts/WRTNODE2P.dts (rev 0) +++ trunk/target/linux/ramips/dts/WRTNODE2P.dts 2016-01-01 21:19:50 UTC (rev 48049) @@ -0,0 +1,27 @@ +/dts-v1/; + +/include/ "WRTNODE2.dtsi" + +/ { + compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc"; + model = "WRTnode2P"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "gpio", "jtag"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + indicator { + label = "wrtnode:blue:indicator"; + gpios = <&gpio1 9 1>; + }; + }; +}; + Added: trunk/target/linux/ramips/dts/WRTNODE2R.dts =================================================================== --- trunk/target/linux/ramips/dts/WRTNODE2R.dts (rev 0) +++ trunk/target/linux/ramips/dts/WRTNODE2R.dts 2016-01-01 21:19:50 UTC (rev 48049) @@ -0,0 +1,27 @@ +/dts-v1/; + +/include/ "WRTNODE2.dtsi" + +/ { + compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc"; + model = "WRTnode2R"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "gpio", "wled_an"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + indicator { + label = "wrtnode:blue:indicator"; + gpios = <&gpio1 12 1>; + }; + }; +}; + Modified: trunk/target/linux/ramips/image/Makefile =================================================================== --- trunk/target/linux/ramips/image/Makefile 2016-01-01 21:19:41 UTC (rev 48048) +++ trunk/target/linux/ramips/image/Makefile 2016-01-01 21:19:50 UTC (rev 48049) @@ -1087,10 +1087,12 @@ # Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628) +Image/Build/Profile/WRTNODE2P=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode2p,WRTNODE2P) ifeq ($(SUBTARGET),mt7628) define Image/Build/Profile/Default $(call Image/Build/Profile/MT7628,$(1)) + $(call Image/Build/Profile/WRTNODE2P,$(1)) endef endif @@ -1100,10 +1102,12 @@ # Image/Build/Profile/LinkIt7688=$(call BuildFirmware/Default32M/$(1),$(1),LinkIt7688,LINKIT7688) +Image/Build/Profile/WRTNODE2R=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode2r,WRTNODE2R) ifeq ($(SUBTARGET),mt7688) define Image/Build/Profile/Default $(call Image/Build/Profile/LinkIt7688,$(1)) + $(call Image/Build/Profile/WRTNODE2R,$(1)) endef endif _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
