Author: blogic Date: 2016-01-01 22:20:02 +0100 (Fri, 01 Jan 2016) New Revision: 48051
Modified: trunk/package/network/config/ltq-vdsl-app/files/dsl_control Log: ltq-vdsl-app: add/enable missing G.993.2 XTSE bits This patch adds the missing VDSL2 bits to the annex specific XTSE (like it should be according to the comments above the XTSE bits). Since r47933 it's mandatory to remove the annex option to switch to VDSL2 (only) operation mode. As shown by ticket #21436 and a few mails I received personally, even experienced users are not aware that they have to remove the annex option to get their VDSL2 line working and as shown by this patch it doesn't need to be that "complicated". Signed-off-by: Mathias Kresin <[email protected]> Modified: trunk/package/network/config/ltq-vdsl-app/files/dsl_control =================================================================== --- trunk/package/network/config/ltq-vdsl-app/files/dsl_control 2016-01-01 21:19:55 UTC (rev 48050) +++ trunk/package/network/config/ltq-vdsl-app/files/dsl_control 2016-01-01 21:20:02 UTC (rev 48051) @@ -11,16 +11,20 @@ [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh +# +# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE)) +# # G.992.1 Annex A # G.992.3 Annex A / L-US1 / L_US-2 / M # G.992.5 Annex A / M -xtse_adsl_a="04_00_04_00_4C_01_04_00" +# G.993.2 Annex A/B/C +xtse_xdsl_a="04_00_04_00_4C_01_04_07" # G.992.1 Annex B # G.992.3 Annex B # G.992.5 Annex B # G.993.2 Annex A/B/C -xtse_adsl_b="10_00_10_00_00_04_00_00" +xtse_adsl_b="10_00_10_00_00_04_00_07" # G.992.1 Annex B # G.992.3 Annex B @@ -28,7 +32,7 @@ # G.992.5 Annex B # G.992.5 Annex J # G.993.2 Annex A/B/C -xtse_adsl_j="10_00_10_40_00_04_01_00" +xtse_adsl_j="10_00_10_40_00_04_01_07" xtse_vdsl="00_00_00_00_00_00_00_07" @@ -40,7 +44,6 @@ local annex local firmware local xtse - local xtse_adsl local mode config_load network @@ -63,12 +66,8 @@ ;; esac - eval "xtse_adsl=\"\${xtse_adsl_$annex}\"" - if [ "${xtse_adsl}" ]; then - xtse=$xtse_adsl - else - xtse=$xtse_vdsl - fi + eval "xtse=\"\${xtse_xdsl_$annex}\"" + [ -z "${xtse}" ] && xtse=$xtse_vdsl [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin [ -f "${firmware}" ] || { _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
