Author: nbd Date: 2016-01-17 20:55:37 +0100 (Sun, 17 Jan 2016) New Revision: 48289
Modified: trunk/target/linux/lantiq/dts/EASY80920.dtsi Log: lantiq: Enable SPI for the EASY80920 board again Also switch to the SPI definition provided by vr9.dtsi Signed-off-by: Martin Blumenstingl <[email protected]> Modified: trunk/target/linux/lantiq/dts/EASY80920.dtsi =================================================================== --- trunk/target/linux/lantiq/dts/EASY80920.dtsi 2016-01-17 19:55:31 UTC (rev 48288) +++ trunk/target/linux/lantiq/dts/EASY80920.dtsi 2016-01-17 19:55:37 UTC (rev 48289) @@ -32,52 +32,6 @@ }; - spi@E100800 { - compatible = "lantiq,spi-xway-broken"; - reg = <0xE100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <22 23 24>; - #address-cells = <1>; - #size-cells = <1>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0 0>; - spi-max-frequency = <1000000>; - - partition@0 { - reg = <0x0 0x20000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "ENV_MAC"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "DPF"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x10000>; - label = "NVRAM"; - read-only; - }; - - partition@500000 { - reg = <0x50000 0x003a0000>; - label = "kernel"; - }; - }; - }; - gpio: pinmux@E100B10 { compatible = "lantiq,pinctrl-xr9"; pinctrl-names = "default"; @@ -341,3 +295,44 @@ }; }; }; + +&spi { + status = "ok"; + + m25p80@3 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <3 0>; + spi-max-frequency = <1000000>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; +}; _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
