Author: blogic Date: 2016-03-10 20:11:13 +0100 (Thu, 10 Mar 2016) New Revision: 48983
Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c Log: ar71xx: Arduino Yun board 'WLAN RST' button support This patch adds support for Arduino Yun board "WLAN RST" button. Signed-off-by: Hirokazu MORIKAWA <[email protected]> Modified: trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c =================================================================== --- trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c 2016-03-10 19:11:09 UTC (rev 48982) +++ trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c 2016-03-10 19:11:13 UTC (rev 48983) @@ -60,6 +60,17 @@ }, }; +static struct gpio_keys_button ds_gpio_keys[] __initdata = { + { + .desc = "configuration button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DS_KEYS_DEBOUNCE_INTERVAL, + .gpio = DS_GPIO_CONF_BTN, + .active_low = 1, + }, +}; + static void __init ds_common_setup(void) { static u8 mac[6]; @@ -97,8 +108,18 @@ ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio), ds_leds_gpio); + ath79_register_gpio_keys_polled(-1, DS_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ds_gpio_keys), + ds_gpio_keys); ath79_register_usb(); + /* use the swtich_led directly form sysfs */ + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + //Disable the Function for some pins to have GPIO functionality active // GPIO6-7-8 and GPIO11 ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0); _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
