Author: rmilecki
Date: 2016-04-09 11:59:21 +0200 (Sat, 09 Apr 2016)
New Revision: 49122
Added:
trunk/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
Modified:
trunk/target/linux/bcm53xx/base-files/etc/board.d/02_network
trunk/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
trunk/target/linux/bcm53xx/image/Makefile
trunk/target/linux/bcm53xx/patches-4.4/306-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
trunk/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
trunk/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
Log:
bcm53xx: add basic support for Netgear R7900
Signed-off-by: Rafa{U+0142} Mi{U+0142}ecki <[email protected]>
Modified: trunk/target/linux/bcm53xx/base-files/etc/board.d/02_network
===================================================================
--- trunk/target/linux/bcm53xx/base-files/etc/board.d/02_network
2016-04-08 20:37:14 UTC (rev 49121)
+++ trunk/target/linux/bcm53xx/base-files/etc/board.d/02_network
2016-04-09 09:59:21 UTC (rev 49122)
@@ -12,9 +12,8 @@
asus,rt-ac87u)
ifname=eth1
;;
+netgear,r7900)
netgear,r8000)
- ifname=eth2
- ;;
netgear,r8500)
ifname=eth2
;;
@@ -23,16 +22,11 @@
;;
esac
-# Workaround for devices using eth2
+# Workaround for devices using eth2 connected to (CPU) switch port 8
case "$board" in
+netgear,r7900)
netgear,r8000)
ifname=eth0
- ;;
-esac
-
-# Workaround for devices using CPU port 8 (connected to eth2)
-case "$board" in
-netgear,r8000)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
board_config_flush
Modified: trunk/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
===================================================================
--- trunk/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
2016-04-08 20:37:14 UTC (rev 49121)
+++ trunk/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
2016-04-09 09:59:21 UTC (rev 49122)
@@ -28,6 +28,7 @@
"netgear,r6250v1") echo "chk U12H245T00_NETGEAR"; return;;
"netgear,r6300v2") echo "chk U12H240T00_NETGEAR"; return;;
"netgear,r7000") echo "chk U12H270T00_NETGEAR"; return;;
+ "netgear,r7900") echo "chk U12H315T30_NETGEAR"; return;;
"netgear,r8000") echo "chk U12H315T00_NETGEAR"; return;;
"netgear,r8500") echo "chk U12H334T00_NETGEAR"; return;;
esac
Modified: trunk/target/linux/bcm53xx/image/Makefile
===================================================================
--- trunk/target/linux/bcm53xx/image/Makefile 2016-04-08 20:37:14 UTC (rev
49121)
+++ trunk/target/linux/bcm53xx/image/Makefile 2016-04-09 09:59:21 UTC (rev
49122)
@@ -177,6 +177,7 @@
$(eval $(call DLinkDevice,dir-885l,wrgac42_dlink.2015_dir885l))
$(eval $(call LinksysDevice,ea6300-v1))
$(eval $(call NetgearDevice,r7000,U12H270T00_NETGEAR))
+$(eval $(call NetgearDevice,r7900,U12H315T30_NETGEAR))
# $(eval $(call NetgearDevice,r8500,U12H334T00_NETGEAR))
$(eval $(call BuildImage))
Added:
trunk/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
===================================================================
---
trunk/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
(rev 0)
+++
trunk/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
2016-04-09 09:59:21 UTC (rev 49122)
@@ -0,0 +1,63 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
+Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <[email protected]>
+---
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
++ bcm4709-netgear-r7900.dtb \
+ bcm4709-netgear-r8000.dtb \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm94708.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
+@@ -0,0 +1,41 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Netgear R7900
++ *
++ * Copyright (C) 2016 Rafał Miłecki <[email protected]>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
++ model = "Netgear R7900";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ axi@18000000 {
++ usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
Modified:
trunk/target/linux/bcm53xx/patches-4.4/306-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
===================================================================
---
trunk/target/linux/bcm53xx/patches-4.4/306-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
2016-04-08 20:37:14 UTC (rev 49121)
+++
trunk/target/linux/bcm53xx/patches-4.4/306-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
2016-04-09 09:59:21 UTC (rev 49122)
@@ -13,8 +13,8 @@
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
+@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-netgear-r7900.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-netgear-r8500.dtb \
Modified:
trunk/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
===================================================================
---
trunk/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
2016-04-08 20:37:14 UTC (rev 49121)
+++
trunk/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
2016-04-09 09:59:21 UTC (rev 49122)
@@ -195,3 +195,15 @@
};
leds {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ axi@18000000 {
Modified:
trunk/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
===================================================================
---
trunk/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
2016-04-08 20:37:14 UTC (rev 49121)
+++
trunk/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
2016-04-09 09:59:21 UTC (rev 49122)
@@ -21,12 +21,14 @@
#include "b53_regs.h"
#include "b53_priv.h"
-@@ -1370,6 +1371,20 @@ static int b53_switch_init(struct b53_de
+@@ -1370,6 +1371,23 @@ static int b53_switch_init(struct b53_de
sw_dev->cpu_port = 5;
}
+ if (of_machine_is_compatible("asus,rt-ac87u"))
+ sw_dev->cpu_port = 7;
++ else if (of_machine_is_compatible("netgear,r7900"))
++ sw_dev->cpu_port = 8;
+ else if (of_machine_is_compatible("netgear,r8000"))
+ sw_dev->cpu_port = 8;
+ else if (of_machine_is_compatible("netgear,r8500"))
@@ -36,7 +38,8 @@
+ * Workaround for devices using port 8 (connected to the 3rd iface).
+ * For some reason it doesn't work (no packets on eth2).
+ */
-+ if (of_machine_is_compatible("netgear,r8000"))
++ if (of_machine_is_compatible("netgear,r7900") ||
++ of_machine_is_compatible("netgear,r8000"))
+ sw_dev->cpu_port = 5;
+
/* cpu port is always last */
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
