Author: blogic Date: 2016-04-21 21:47:08 +0200 (Thu, 21 Apr 2016) New Revision: 49213
Added: trunk/target/linux/ramips/dts/ZBT-WG3526.dts Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network trunk/target/linux/ramips/base-files/etc/diag.sh trunk/target/linux/ramips/base-files/lib/ramips.sh trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh trunk/target/linux/ramips/image/mt7621.mk trunk/target/linux/ramips/mt7621/profiles/zbt.mk Log: ramips: Add support for ZBT WG3526 The WG3526 is the follow-up to the 2626 and is mostly the same, with the excaption that the mt7602 has been replaced with the mt7603. The internal wifi setup has also changed slightly. Based on my tests, everything that worked on the 2626 works on the 3526 and with roughly the same performance. v1->v2: * Remove some references to 2626 that I had missed in the dts. v2->v3: * Update patch to match new file structure. * Removed SD driver to be consistent with other MT7621 targets. Signed-off-by: Kristian Evensen <[email protected]> Modified: trunk/target/linux/ramips/base-files/etc/board.d/02_network =================================================================== --- trunk/target/linux/ramips/base-files/etc/board.d/02_network 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/base-files/etc/board.d/02_network 2016-04-21 19:47:08 UTC (rev 49213) @@ -86,6 +86,7 @@ wt1520|\ y1|\ zbt-wg2626|\ + zbt-wg3526|\ youku-yk1) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" Modified: trunk/target/linux/ramips/base-files/etc/diag.sh =================================================================== --- trunk/target/linux/ramips/base-files/etc/diag.sh 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/base-files/etc/diag.sh 2016-04-21 19:47:08 UTC (rev 49213) @@ -66,7 +66,8 @@ v11st-fe|\ vocore|\ wmr-300|\ - zbt-wg2626) + zbt-wg2626|\ + zbt-wg3526) status_led="$board:green:status" ;; atp-52b|\ Modified: trunk/target/linux/ramips/base-files/lib/ramips.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/ramips.sh 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/base-files/lib/ramips.sh 2016-04-21 19:47:08 UTC (rev 49213) @@ -508,6 +508,9 @@ *"ZBT-WG2626") name="zbt-wg2626" ;; + *"ZBT-WG3526") + name="zbt-wg3526" + ;; *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; Modified: trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh =================================================================== --- trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/base-files/lib/upgrade/platform.sh 2016-04-21 19:47:08 UTC (rev 49213) @@ -151,6 +151,7 @@ zbt-wa05|\ zbt-we826|\ zbt-wg2626|\ + zbt-wg3526|\ zbt-wr8305rt|\ zte-q7|\ youku-yk1) Copied: trunk/target/linux/ramips/dts/ZBT-WG3526.dts (from rev 49212, trunk/target/linux/ramips/dts/ZBT-WG2626.dts) =================================================================== --- trunk/target/linux/ramips/dts/ZBT-WG3526.dts (rev 0) +++ trunk/target/linux/ramips/dts/ZBT-WG3526.dts 2016-04-21 19:47:08 UTC (rev 49213) @@ -0,0 +1,127 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "ZBT-WG3526"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "zbt-wg3526:green:status"; + gpios = <&gpio0 24 1>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; Modified: trunk/target/linux/ramips/image/mt7621.mk =================================================================== --- trunk/target/linux/ramips/image/mt7621.mk 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/image/mt7621.mk 2016-04-21 19:47:08 UTC (rev 49213) @@ -103,6 +103,12 @@ endef TARGET_DEVICES += zbt-wg2626 +define Device/zbt-wg3526 + DTS := ZBT-WG3526 + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef +TARGET_DEVICES += zbt-wg3526 + define Device/wf-2881 DTS := WF-2881 BLOCKSIZE := 128KiB Modified: trunk/target/linux/ramips/mt7621/profiles/zbt.mk =================================================================== --- trunk/target/linux/ramips/mt7621/profiles/zbt.mk 2016-04-21 19:47:02 UTC (rev 49212) +++ trunk/target/linux/ramips/mt7621/profiles/zbt.mk 2016-04-21 19:47:08 UTC (rev 49213) @@ -16,3 +16,16 @@ Package set for ZBT-WG2626 device endef $(eval $(call Profile,ZBT-WG2626)) + + +define Profile/ZBT-WG3526 + NAME:=ZBT-WG3526 Device + PACKAGES:=\ + kmod-usb-core kmod-usb3 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci +endef + +define Profile/ZBT-WG3526/Description + Package set for ZBT-WG3526 device +endef +$(eval $(call Profile,ZBT-WG3526)) _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
