Author: blogic
Date: 2016-04-29 13:35:05 +0200 (Fri, 29 Apr 2016)
New Revision: 49270
Modified:
trunk/target/linux/lantiq/dts/VG3503J.dtsi
trunk/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
Log:
lantiq: use the same functionality for all ethernet phys led
The VGV7510KW22 has the leds for LAN1-3 connected to pin1 of the phys
and the led for LAN4 connect to pin0 of the phy. This results with the
current configuration in a fast flashing LAN4 led as soon as a network
cable is connected. Something similar was reported on the forum[1] for
the VGV7519 as well.
Since it isn't predicable to which pin a (single) phy led is connected,
use the (default) pin1 functionality
Constant On: 10/100/1000MBit
Blink Fast: None
Blink Slow: None
Pulse: TX/RX
for all ethernet phy leds.
After checking pictures of all vr9 boards, it looks like only the VG3503J
has more than one led connected per phy. Using the phy led device tree
bindings to assign the functionality to the "additional" leds, the
VG3503J phy leds should behave as before.
Signed-off-by: Mathias Kresin <[email protected]>
[1] https://forum.openwrt.org/viewtopic.php?pid=321523
Modified: trunk/target/linux/lantiq/dts/VG3503J.dtsi
===================================================================
--- trunk/target/linux/lantiq/dts/VG3503J.dtsi 2016-04-29 11:35:01 UTC (rev
49269)
+++ trunk/target/linux/lantiq/dts/VG3503J.dtsi 2016-04-29 11:35:05 UTC (rev
49270)
@@ -153,10 +153,18 @@
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led0h = <0x42>;
+ lantiq,led0l = <0x10>;
+ lantiq,led2h = <0x20>;
+ lantiq,led2l = <0x00>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g",
"ethernet-phy-ieee802.3-c22";
+ lantiq,led0h = <0x42>;
+ lantiq,led0l = <0x10>;
+ lantiq,led2h = <0x20>;
+ lantiq,led2l = <0x00>;
};
};
};
Modified:
trunk/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
===================================================================
---
trunk/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
2016-04-29 11:35:01 UTC (rev 49269)
+++
trunk/target/linux/lantiq/patches-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
2016-04-29 11:35:05 UTC (rev 49270)
@@ -165,14 +165,14 @@
+
+ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5);
+ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67);
-+ vr9_gphy_mmd_write(phydev, 0x1e2, 0x42);
-+ vr9_gphy_mmd_write(phydev, 0x1e3, 0x10);
++ vr9_gphy_mmd_write(phydev, 0x1e2, 0x70);
++ vr9_gphy_mmd_write(phydev, 0x1e3, 0x03);
+ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70);
+ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03);
-+ vr9_gphy_mmd_write(phydev, 0x1e6, 0x20);
-+ vr9_gphy_mmd_write(phydev, 0x1e7, 0x00);
-+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
-+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
++ vr9_gphy_mmd_write(phydev, 0x1e6, 0x70);
++ vr9_gphy_mmd_write(phydev, 0x1e7, 0x03);
++ vr9_gphy_mmd_write(phydev, 0x1e8, 0x70);
++ vr9_gphy_mmd_write(phydev, 0x1e9, 0x03);
+
+ vr9_gphy_of_reg_init(phydev);
+
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
