Hello David,
nice work :) For real I want the rb1xx target to be nuked, and have a
rb-2.6 target which supports both the 5xx and 1xx with the same kernel,
and uses adm5120-2.6 as a base, so the fact it doesn't work on the rb1xx
target isn't a problem, but more like a feature ;)
Imre
On Tue, 17 Apr 2007 20:44:04 +0200, David Goodenough
<[EMAIL PROTECTED]> wrote:
Yea, it works.
I now have a Yaffs and NAND build that works. For some reason the config
entries for the RB532 are wrong for the 1xx, in particular you must NOT
have
YAFFS do the ECC. Interestingly FreeWrt have this turned off for their
RB532 support.
So the config options to be added to the config/default are:-
# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
CONFIG_YAFFS_AUTO_YAFFS2=y
# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
# CONFIG_YAFFS_DOES_ECC is not set
# CONFIG_YAFFS_ECC_WRONG_ORDER is not set
CONFIG_YAFFS_FS=y
CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y
Also you need to change CONFIG_MTD_BLOCK2MTD=y in config/default.
Two different top level configs are requires, one which includes
initramfs
and the other of which puts everything in a tar file. It is a shame that
when you turn on initramfs (ramdisk) in menuconfig all the other target
options get turned off.
I will now write a script /sbin/tftp2nand to download the tar file and
initialise the NAND partitions.
The rbmipsnand.c file is as I last sent to you Florian.
BUT, I can only get this to work in the ADM5120-2.6 target, I can not
get the
kernel in rb1xx-2.6 to boot cleanly. It get a bit further than when I
pointed
the problem to you Florian, but you get a kernel trap about the time it
should
be starting the console. Obviously this needs to be fixed.
David
_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
