i'm curious about this snippet from tmp/.config-target.in:
...
config TARGET_brcm_2_4
bool "Broadcom BCM947xx/953xx [2.4]"
select LINUX_2_4
select LINUX_2_4_34
select mipsel
select PCI_SUPPORT
select PCMCIA_SUPPORT
select USES_SQUASHFS
select USB_SUPPORT
help
Build firmware images for Broadcom based routers
(e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
config TARGET_brcm47xx
bool "Broadcom BCM947xx/953xx [2.6]"
select LINUX_2_6
select LINUX_2_6_23
select mipsel
select PCI_SUPPORT
select USES_SQUASHFS
select USB_SUPPORT
help
Build firmware images for Broadcom based routers
(e.g. Netgear WGT634U)
...
why does the 2.4-based build select PCMCIA support, but not the 2.6?
i would have thought that those two builds should be functionally
equivalent, at least in terms of features.
rday
--
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA
http://crashcourse.ca
========================================================================
_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
