> Hotplug script and config file to establish a 6-to-4 tunnel using a IPv6
> public relay or tunnel broker.
It must be noted that the sit driver creates an automatic interface sit0
which can be used to setup 6to4 tunnels.
If you need only one 6to4 tunnel through the default route, you only
have to add something like this to /etc/config/network:
config interface 6to4
option ifname sit0
option proto static
option ip6addr ipv6_address/prefix
option ip6gw ::192.88.99.1
That's what I'm currently using.
ben
_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
