hi, i was working with the nanostations some weeks ago,
the big deal with the diversity is, that the nanostations has two
diversity switches,
so, as fare as i know, if diversity is complete disabled, the external
antenna plug is the default one.
if the first diversity in on and the second diversity switch is off,
the horizontal antenna is activ,
if both diversity switches are on the vertical antenna is activ.


2008/10/14 Xavier Martinez <[EMAIL PROTECTED]>:
> Travis Kemen wrote:
>
>> If you are using the internal antenna's on a ns2 they currently work
>> via the madwifi rx(tx)antenna settings but to use the external antenna
>> you need to install gpioctl and set softled to 0 for wifi0 in sysctl,
>> then use gpioctl to set pin 7 low.
> I've tried this procedure to my NS2 with (openwrt trunk r12842 with gpioctl)
> in a 2 km link in adhoc mode without any external annena neither
> a pigtail connected to the SMA connector.
>
> My /etc/config/wireless looks like this:
>
> config 'wifi-device' 'wifi0'
>         option 'type' 'atheros'
>         option 'disabled' '0'
>         option 'channel' '6'
>         option 'mode' '11b'
>         option 'txantenna' '2'
>         option 'rxantenna' '2'
>         option 'distance' '5000'
>         option 'softled' '0'
> config 'wifi-iface'
>         option 'device' 'wifi0'
>         option 'encryption' 'none'
>         option 'ssid' 'guifibages'
>         option 'mode' 'adhoc'
>         option 'bssid' '12:34:56:78:9A:BC'
>         option 'network' 'wlan'
>         option 'txpower' '16'
>
> Doing "gpioctl set 7" results in a Pin 7 HIGH and the pings to the other
> machine are answered. In this case internal antenna is working. But when I
> do a "gpioctl clear 7" resulting in a Pin 7 LOW, the pings are also
> answered. In think that its impossible to establish a 2 km link without an
> external antenna connected, so I think that internal antenna is also
> working. What do you think?
>
> I haven't had time to try connecting an external antenna focusing the other
> machine and the nanostation focusing the other side. This could clarify if
> both antennas are working with Pin 7 LOW or only the internal antenna does.
>
> What do you think?
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to