Hi,

I tried to boot the 2.6 kernel image openwrt-wrt54g-squashfs.bin on a
wrt54g v1.1 and it fails to mount  the jffs2 filesystem.
The 2.4 image works flawlessly.
Appended is the dmesg output of the failing, and the working case,
any ideas?

Best regards,
Arnd


Linux version 2.6.25.17 (n...@baustelle) (gcc version 4.1.2) #9 Wed Jan 21 
03:52:12 CET 2009
console [early0] enabled
CPU revision is: 00024000 (Broadcom BCM4710)
ssb: Core 0 found: SDRAM (cc 0x803, rev 0x00, vendor 0x4243)
ssb: Core 1 found: ILine 20 (cc 0x801, rev 0x00, vendor 0x4243)
ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x00, vendor 0x4243)
ssb: Core 3 found: V90 (cc 0x807, rev 0x00, vendor 0x4243)
ssb: Core 4 found: USB 1.1 Hostdev (cc 0x808, rev 0x00, vendor 0x4243)
ssb: Core 5 found: PCI (cc 0x804, rev 0x00, vendor 0x4243)
ssb: Core 6 found: MIPS (cc 0x805, rev 0x00, vendor 0x4243)
ssb: Core 7 found: EXTIF (cc 0x811, rev 0x00, vendor 0x4243)
ssb: Core 8 found: Fast Ethernet (cc 0x806, rev 0x00, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 2 => 2
ssb: set_irq: core 0x0804, irq 4 => 3
ssb: set_irq: core 0x0806, irq 0 => 4
ssb: Sonics Silicon Backplane found at address 0x18000000
Serial init done.
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Entering add_active_range(0, 0, 4096) 0 entries of 256 used
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal          0 ->     4096
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->     4096
On node 0 totalpages: 4096
  Normal zone: 32 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 4064 pages, LIFO batch:0
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 
init=/etc/preinit noinitrd console=ttyS0,115200
Enabling BCM4710A0 cache workarounds.
Primary instruction cache 8kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
Synthesized clear page handler (26 instructions).
Synthesized copy page handler (46 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13564k/16384k available (2082k kernel code, 2820k reserved, 315k data, 
128k init, 0k highmem)
Calibrating delay loop... 82.68 BogoMIPS (lpj=165376)
Mount-cache hash table entries: 512
net_namespace: 540 bytes
NET: Registered protocol family 16
Switched to high resolution mode on CPU 0
ssb: PCIcore in host mode found
Registering a PCI bus after boot
PCI: Fixing up bridge 0000:00:00.0
PCI: Setting latency timer of device 0000:00:00.0 to 64
PCI: Fixing up device 0000:00:00.0
PCI: Fixing latency timer of device 0000:00:00.0 to 168
PCI: Enabling device 0000:00:08.0 (0000 -> 0002)
PCI: Fixing up device 0000:00:08.0
PCI: Setting latency timer of device 0000:00:08.0 to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
ssb: SPROM revision 1 detected.
ssb: Sonics Silicon Backplane found on PCI device 0000:00:08.0
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
detected lzma initramfs
initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:41:9d:17:35
eth1: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:41:9d:17:36
flash init: 0x1fc00000 0x00400000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0035
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x2000,blocks=8
erase region 1: offset=0x10000,size=0x10000,blocks=63
Flash device: 0x400000 at 0x1fc00000
bootloader size: 262144
Updating TRX offsets and length:
old trx = [0x0000001c, 0x0000090c, 0x000be400], len=0x00261000 crc32=0xa9cd5a34
new trx = [0x0000001c, 0x0000090c, 0x000be400], len=0x000be400 crc32=0x34fe88c4
Done
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000fe400-0x003f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force 
read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=290000, len=160000 
0x00290000-0x003f0000 : "rootfs_data"
0x003f0000-0x00400000 : "nvram"
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
turn off boot console early0
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
Please be patient, while OpenWrt loads ...
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'Linksys WRT54G V1.x'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: No Robo switch in managed mode found
roboswitch: Probing device eth1: <3>roboswitch: 
[/home/nbd/release/brcm47xx/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:117]
 SIOCGETCPHYRD failed!
roboswitch: 
[/home/nbd/release/brcm47xx/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:117]
 SIOCGETCPHYRD failed!
No Robo switch in managed mode found
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
b44: eth0: powering down PHY
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
br-lan: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering forwarding state
There is already a switch registered on the device 'eth0'
roboswitch: Probing device eth1: <3>roboswitch: 
[/home/nbd/release/brcm47xx/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:117]
 SIOCGETCPHYRD failed!
roboswitch: 
[/home/nbd/release/brcm47xx/build_dir/linux-brcm47xx/kmod-switch/switch-robo.c:117]
 SIOCGETCPHYRD failed!
No Robo switch in managed mode found
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
b43-phy0: Broadcom 4306 WLAN found
b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
b43-phy0 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: NLR, Firmware-ID: FW13 ]
br-lan: port 1(eth0.0) entering disabled state
br-lan: port 1(eth0.0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering forwarding state
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0xdede 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00010000: 0xdede 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00030000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00030004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00030008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00050000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00050004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00050008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00070000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00070004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00070008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00090000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00090004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00090008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000b0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000d0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000d0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000d0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000f0000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000f0004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000f0008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00110000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00110004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00110008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00130008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0xb1b1 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0x4444 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x1d1d 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0x0202 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x0101 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xeded 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014002c: 0x5858 
instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150000: 0x8585 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150004: 0x0c0c 
instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00150008: 0xb1b1 
instead
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 0, bad_blocks 0, c->nr_blocks 22

CPU revision is: 00024000
Enabling BCM4710A0 cache workarounds.
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Linux version 2.4.35.4 (n...@baustelle) (gcc version 3.4.6 (OpenWrt-2.0)) #27 
Wed Jan 21 02:43:07 CET 2009
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 
init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4710 rev 0 at 125 MHz
Using 62.400 MHz high precision timer.
!unable to setup serial console!
Calibrating delay loop... 82.94 BogoMIPS
Memory: 14260k/16384k available (1425k kernel code, 2124k reserved, 100k data, 
84k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
enabled
b44.c:v0.93 (Mar, 2004)
PCI: Setting latency timer of device 00:02.0 to 64
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:0c:41:9d:17:35
PCI: Setting latency timer of device 00:08.0 to 64
eth1: Broadcom 47xx 10/100BaseT Ethernet 00:0c:41:9d:17:36
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x2000,blocks=8
1: offset=0x10000,size=0x10000,blocks=63
Using word write method
Flash device: 0x400000 at 0x1fc00000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x180c3f
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000904, 0x0007b000], len=0x00211000 crc32=0x458a9d08
new trx = [0x0000001c, 0x00000904, 0x0007b000], len=0x00200000 crc32=0xd487b6ff
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000bb000-0x00240000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force 
read-only
0x003f0000-0x00400000 : "nvram"
0x00240000-0x003f0000 : "rootfs_data"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
diag: Detected 'Linksys WRT54G V1.x'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: No Robo switch in managed mode found
roboswitch: Probing device eth1: No Robo switch in managed mode found
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
eth0.0: add 01:00:5e:00:00:01 mcast address to master interface
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
There is already a switch registered on the device 'eth0'
roboswitch: Probing device eth1: No Robo switch in managed mode found
roboswitch: Probing device eth2: No such device
roboswitch: Probing device eth3: No such device
eth0.1: del 01:00:5e:00:00:01 mcast address from vlan interface
eth0.1: del 01:00:5e:00:00:01 mcast address from master interface
eth0.1: add 01:00:5e:00:00:01 mcast address to master interface
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
br-lan: port 1(eth0.0) entering disabled state
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
PCI: Setting latency timer of device 01:08.0 to 64
PCI: Enabling device 01:08.0 (0004 -> 0006)
PCI/DMA
wl0: wlc_attach: chiprev 3 coreunit 0 corerev 5 cccap 0x4002a maccap 0x0 band 
2.4G, phy_type 2 phy_rev 2 ana_rev 2
wl0: Broadcom BCM4320 802.11 Wireless Controller 4.150.10.5
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 360 bytes per conntrack
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs


_______________________________________________
openwrt-devel mailing list
[email protected]
http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to