On Sun, 2009-02-01 at 16:53 +0100, Hauke Mehrtens wrote: > Brian J. Murrell wrote: > > I've just posted some more details to ticket #3152 which is currently > > closed. Could somebody with permission to do so, please reopen it? > > > > Basically, I'm getting: > > > > b43-phy2: Broadcom 4318 WLAN found > > phy2: Selected rate control algorithm 'pid' > > Broadcom 43xx driver loaded [ Features: NLR, Firmware-ID: FW13 ] > > input: b43-phy2 as /devices/virtual/input/input3 > > b43-phy2 ERROR: Firmware file "b43/b0g0initvals5.fw" not found > > b43-phy2 ERROR: You must go to > > http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download > > the latest firmware (version 4). > > > > Trying to do: > > > > insmod b43 > > ifconfig wlan0 up
> Hi, Hi. > is the b43 module also on an external USB drive? Yes. Which is mounted in /sbin/mount_root. > The b43 driver is > initilizied very early, Not before /sbin/mount_root does it's thing I am quite sure. > probably before the USB drive is fully > initialized and then the driver does not find the firmware. Not likely given that the b43 is not in the firmware image. > Have you tried to put the firmware onto the internal flash? Nope. But all of this is moot. Notice in my original message I state that I am getting this error simply from trying to do: insmod b43 ifconfig wlan0 up The implication there is that this is being done at the command line after the system is fully booted. b.
signature.asc
Description: This is a digitally signed message part
_______________________________________________ openwrt-devel mailing list [email protected] http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
