hi, i have this issue as well. this is not only on asus devices, i got it on a x86 with 3 network cards running as a router for vdsl. the ppp number is counting up from ppp0 to ppp1, ppp2 and so one. i think this is a problem in the firewall script, not the network script. some openwrt developer said, this was fixed with 8.09 but it is not. the problem itself is, that the masquerading rule is not working anymore, if your wan device is ppp0 but the masquerading rule is on ppp2. the box itself has internet but nat for the network behind is at this time not working. i have not found the bug yet, but told two openwrt developers. regards ulf
2009/4/9 Kövesdi György <[email protected]>: > Hi, > I have OpenWrt (Kamikaze 8.09) on Asus WL500GP with kernel version 2.6.25.17. > Using the firewall I found that after manual restart (/etc/init.d/firewall > restart) the ppp interfaces can be set up incorrectly. I have only one ppp0 > interface, but the iptables (iptables -L -v) can conatin ppp0 and/or ppp2 > references randomly. If ppp0 is missing, then the network does not work at > all. Restarting the firewall does not resolve the problem, but restarting the > network (/etc/init.d/network restart) usually does. > After system restart the firewall always set up correctly. > Where the interface name comes from? > > Thanx in advance > K. Gy. > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
